
POR2-QUESTIONS FOR GENERATORS Answer True or False for the following. (Mechancal inbo Eleetvical) 1) Generators Convert...
Problem 3. Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4 + j1.6) 12 per phase between generator G1 and the load, and (0.8 + jl) 2 per phase between generator G2 and the load. If generator G1 supplies 15 kW at 0.8 power factor lagging, with a terminal voltage of 460 V line-to-line, determine: 1. The voltage at the load terminals. 2....
true or false with explanation a- A separately excited DC generator terminal current increases as a resistive load is applied b- In a separately excited DC generator, a voltage will exist at the terminals for a zero speed c- Doubling the load on the generator will increase the generator voltage by a factor of two. d- The commutator is used for adding a resistor to the rotor. e- A rotating magnetic field is produced around the air gap.
4. Explain the conditions for parallel operation of synchronous generators. A three phase, wye connected, synchronous generator is rated 150 MW, 0.85 lagging power factor, 12.6 kV, 60 Hz, and 1800 rpm. Each winding has an armature resistance of 0.0522 and a synchronous reactance of 0.612. Draw the phasor diagram with values, show torque angle and determine the induced voltage for the condition of rated load. (30 pts)
EXPLAIN THESE QUESTIONS WITH THE HELP OF DIAGRAMS AND
LABEL DIAGRAMS IN SUCH A WAY THAT I CAN EASILY UNDERSTAND WHAT WE
ARE FINDING AND HOW WE ARE FINDING THE REQUIRED THINGS .I AM
POSTING MY QUESTION 4TH TIME PLEASE DONOT WASTE IT AND PLEASE DO
ALL STEPS I NEED MY ANSWER STEP BY STEP
by the line Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other 15 kW at 0.9 power factor...
Good day all.
I am facing the following problem and would like to seek some
kind help, please.
Sincerely appreciate all help and input.
- Ms Tan
1. An 10 MVA, 33 kV, 34 pole, 60 Hz, three-phase wye-connected synchronous generator has a synchronous reactance of 10 and a negligible armature resistance. a. Find the synchronous speed of this generator. b. At a certain excitation, the generator delivers 50% of rated load at 0.7 leading power factor at '33' kV....
3.1 When two four pole, 50 Hz synchronous generators are paralleled their phase displacement is 2 mechanical. The synchronous reactance of each machine is 10 n/phase and the common busbar voltage is 66kV. Calculs the s cho nisimlengud AN 2 A synchronous generator has a synchronous impedance of 2p and a resist ance of 0.01 p.u. It is connected to an infinite busbar of voltage 1 pu. through a transformer of reactance 01 pou. If the generated (no-load) emfis 1.1...
Are the claims true or false? 1. The RMS value of the neutral wire current is approximately six times the third harmonic RMS current in the line conductors of three-phase, four-wire systems with identical singlephase diode bridge rectifier systems in each phase of the load side true / false 2. The main disadvantage of a synchronous buck converter is that the voltage drop across the lowside MOSFET can be higher than the voltage drop across the power diode of the...
solve no: 3.14 , 3.16, 3.19
please show each step and solve for beginners
120 Power System Analysis 3.12. A single-phase system similar to that shown in Figure 3.11 has two transformers A-B a B-C connected by a line B feeding a load at the receiving end C. The ratings and parame ter values of the components are 500 V/1.5 kV, 9.6 kVA. leakage reactance 5 % 1.2 kV/120 V, 7.2 kVA, leakage reactance 4 % series impedance (0.5 +...
please answer 13.16
at rated load of unity power factor and rated terminal voltage, determine efficienc including field rheostat loss. Ans. 93.139 13.11 A generator under test is rated at 100 KVA, 3-phase, 60-Hz; 2,400 volts. (a) If driven b a de motor unexcited, the motor output is 1.26 KW. (b) If driven by a de motor, generato on open circuit and excited to generate rated potential, the motor output is 2.5 KW. ( Ifdriven by a de motor, generator...
I
need help to solve this questions about Generator Governor Droop
and Transmission Line. A complete solutions with answers would be
great. Thank you
Generation Question 1 to 5 relate to the following grid connected generator. A governor-controlled, steam-driven 450 MW synchronous generator with 5% droop is synchronized to the 60 Hz grid and its load set-point adjusted to deliver 300 MW to the grid. Q1. (a) 000 What is the actual droop of the generating unit? 0.0225 Hz/MW (b)...