
Chapter 3, Reserve Problem 3/048 The uniform I-beam has a mass of 77 kg per meter...
The uniform beam has a mass of 49 kg per meter of
length. Determine the reactions at the supports.
show your work
- 2.4 m 1.2 m SCREEN 280 kg AU Answers: Z Ay = i Bx = i By = i Z Z
3.) A uniform beam, mass 15.0 kg. hangs motionless, supported by three cables as shown in the figure. A 12.0 kg mass hangs from a point one- quarter of the length of the beam from the left end. T=? What is the tension in the vertical cable attached at the left end of the beam? m
a uniform beam of mass M = 61 kg and length L = 11 m is hung horizontally by vertical cables at the two ends, as shown. a mass of m = 31 kg is then hung from the beam at a distance of 5/8L from the left side. what is the tension in the rightmost cable?
The uniform steel beam of mass m = 14.2 kg and length / = 310 mm is suspended by the two cables at A and B. If the cable at B suddenly breaks, determine the tension T in the cable at A immediately after the break occurs. Treat the beam as a slender rod 59 F 59° Answer: T- 139.55 the tolerance is +/-2%
A uniform beam of length 20.0 m and mass 50.0 kg is attached to a wall at one end and free to pivot at this point. The beam is held horizontal by a cable attached to the midpoint of the beam and to a point on the wall 5.77 m above the pivot point. The angle between the beam and the cable is 30 degrees. A 20 .0 kg mass hangs from a second cable which is attached to the...
3) A uniform horizontal beam of length 12.0 m and a mass of 20 kg is attached to a wall. Its far end is suspended by a cable that makes an angle of 63 degrees with the beam. A person of mass 72 kg stands a distance d = 4.0 m from the wall. Find the tension in the cable as well as the magnitude and direction of the force exerted by the wall on the beam.
The uniform steel beam of mass m and length is suspended by the two cables at A and B. If the cable at B suddenly breaks, determine the tension Tin the cable at A immediately after the break occurs. Treat the beam as a slender rod and show the result is independent of the length of the beam. 60° 60°
a sign of mass 20.0 kg is supported at the end of a uniform beam of mass 10.0 kg and length 2.00!m. the beam makes an angle of 30.0 degrees with the horizontal. a wire is attached from the end of the rod to a point on the wall and makes an angle if 20.0 degrees to the horizontal. what is the tension of the wire. what are the magnitudes of the horizontal and vertical components of the reaction force...
I - AMFE A uniform beam of length 2 m and a mass of 45 kg is mo 15° angle form horizontal, supported on one end by a hinge connecting it to a wall, and on the other end by a rope that is at a 15° angle to horizontal as shown. What is the tension rope?
Chapter 6, Problem 6/098 The assembly consisting of a uniform slender bar (mass 2.1 kg and L0.45 m) and a rigidly attached uniform disk (mass 6.1 kg) is freely pinned to point O on the collar that in turn slides on the fixed horizontal guide. The assembly is at rest when the collar is given a sudden acceleration a 4.6 m/s2 to the left as shown. Determine the initial angular acceleration a of the assembly. The angular acceleration is positive...