what amount of force does a one inch fire hose with a one inch nozzle, pumping...

Question

Question

what amount of force does a one inch fire hose with a one inch nozzle, pumping 15gpm at 50psi have on the firefighter holding it?

science physics

Answer 1

Answer #1

AYea A -0.78 54 in 1 FOYCE 5o Lb inX0785y int F: PA F=39.27 Lb t AnsweY Wos needed en Newtans F=39.27X4 422174.6 N

Answer 2

Similar Homework Help Questions

What is the force a fire hose puts off on the firefighter holding it for a...

What is the force a fire hose puts off on the firefighter holding it for a 1.75inch hose pumping 170gpm at 125 psi? please show steps what is velocity of the water coming from hose? (in m/s) what is the flow rate?
The water coming from a fire hose produces a tremendous amount of force. If not careful,...

The water coming from a fire hose produces a tremendous amount of force. If not careful, a firefighter may not be able to hold the fire hose and hurt himself or somebody. Consider a fire hose having an inner diameter of 75 mm. Water is coming out with a speed of 17.0 m/s and at a rate of 1500 kg/min . How much force does it take to hold the fire hose in place?
A firefighter mounts the nozzle of his fire hose at the base of a burning building...

A firefighter mounts the nozzle of his fire hose at the base of a burning building so that it sprays vertically upwards. The initial radius of the hose is r1 = 4.00 cm. After quenching a hotspot at a height of h1 = 8.97 m, the firefighter adjusts the nozzle diameter so that the water hits the building at a height of h2 = 16.3 m. What is the new radius of the hose?

A firefighter mounts the nozzle of his fire hose a distance 38.5 m away from the...

A firefighter mounts the nozzle of his fire hose a distance 38.5 m away from the edge of a burning building so that it sprays from ground level at a 45° angle above the horizontal. After quenching a hotspot at a height of 8.97 m, the firefighter adjusts the nozzle diameter so that the water hits the building at a height of 17.5 m. By what factor was the nozzle diameter changed? Assume that the flow rate of water through...
A firefighter mounts the nozzle of his fire hose a distance 33.7 m33.7 m away from...

A firefighter mounts the nozzle of his fire hose a distance 33.7 m33.7 m away from the edge of a burning building so that it sprays from ground level at a 45° angle above the horizontal. After quenching a hotspot at a height of 8.85 m,8.85 m, the firefighter adjusts the nozzle diameter so that the water hits the building at a height of 17.1 m.17.1 m. By what factor was the nozzle diameter changed? Assume that the flow rate...
2. Firefighters are holding a nozzle at the end of a hose while trying to extinguish...

2. Firefighters are holding a nozzle at the end of a hose while trying to extinguish a fire. If the nozzle exit diameter is 10 cm and the water flow rate is 12m/min, determine (a) the average water exit velocity and (b) the horizontal resistance force required of the firefighters to hold the nozzle. (10 pts) 12 m/min

9. A fire hose nozzle has a diameter of 0.03m, and must be able to deliver...

9. A fire hose nozzle has a diameter of 0.03m, and must be able to deliver a flow rate of 1 cubic meter per minute. If the nozzle is attached to a hose with 10cm diameter, what pressure must be maintained just upstream of the nozzle to deliver this flow rate? Assume no energy loss. OSS
Suppose you have a 8.2 cm diameter fire hose with a 2.4 cm diameter nozzle

Suppose you have a 8.2 cm diameter fire hose with a 2.4 cm diameter nozzle Part (a) Calculate the pressure drop due to the Bernoulli effect as water enters the nozzle from the hose at the rate of 40.0 L/s. Take 1.00×103 kg/m3 for the density of the water. Part (b) To what maximum height, in meters, above the nozzle can this water rise? (The actual height will be significantly smaller due to air resistance.) +
Suppose you have a 8.8cm diameter fire hose with a 3.2 cm diameter nozzle. Solve all...

Suppose you have a 8.8cm diameter fire hose with a 3.2 cm diameter nozzle. Solve all questions: a and b! Thank you. Class Management | Help Assignment 8 Begin Date: 3/23/2020 9:01:00 AM -- Due Date: 3/30/2020 9:00:00 AM End Date: 3/30/2020 9:00:00 AM (8%) Problem 12: Suppose you have a 8.8 cm diameter fire hose with a 3.2 cm diameter nozzle. | A 50% Part (a) Calculate the pressure drop due to the Bernoulli effect as water enters the...

Water flows through a fire hose of diameter 6.35 cm at a rate of 0.0115 m3/s....

Water flows through a fire hose of diameter 6.35 cm at a rate of 0.0115 m3/s. The fire hose ends in a nozzle of inner diameter 2.20 cm. What is the speed with which the water exits the nozzle? ? m/s