How much moisture per pound of dry air is removed by air entering moist grain at...

Question

Question

How much moisture per pound of dry air is removed by air entering moist grain at...

How much moisture per pound of dry air is removed by air entering moist grain at 110 degrees F dry bulb temperature and exiting the grain at 90% RH and 68 degrees F wet bulb?

Moisture Removed = ? lbs H2O/lb DA

engineering Mechanical-Engineering

Add a comment Improve this question Transcribed image text

Answer 1

Answer #1

Given that

the moisture per pound of dry air

Answer according to psychometric chart. to pay at point liso Humidity ratio at 43.3334.01.RH. at point 2 HR2 = 14.263 gn of

Add a comment

Answer 2

Similar Homework Help Questions

How much moisture per pound of dry air is removed by air entering moist grain at...

How much moisture per pound of dry air is removed by air entering moist grain at 110 degrees F dry bulb temperature and exiting the grain at 90% RH and 68 degrees F wet bulb? This question has been posted many times and all of them are incorrect!
4. Moist air enters a chamber at 60°F dry-bulb and 46 °F wet-bulb temperature at a...

4. Moist air enters a chamber at 60°F dry-bulb and 46 °F wet-bulb temperature at a rate of 5000 cfm. In passing through the chamber, the air absorbs sensible heat at a rate of 20,000 Btu/h and picks up 63 lb/h of saturated steam at 200°F. Determine: (a) The dry-bulb and wet-bulb temperatures of the leaving air. (b) The sensible heat factor (25)
3. Air at a dry bulb temperature of 40C and a wet bulb temperature of 20C...

3. Air at a dry bulb temperature of 40C and a wet bulb temperature of 20C is first heated in a heater to a dry bulb temperature of 90C. Then it is passed through a bed of apricot slices to dry them. The air exiting from the top of the apricot bed is at a dry bulb temperature of 60C. It is then passed through a dehumidifier to reduce its relative humidity to 10%. Clearly show the various paths of...

Wet leather enters a continuous drier at 45% moisture (wet) and leaves at a rate of...

Wet leather enters a continuous drier at 45% moisture (wet) and leaves at a rate of 200 lbs/h with a moisture content of 25% moisture (dry). Air at 140°F and 10% RH enters the drier, and leaves the drier at 120°F and 40% RH. Assume atmospheric pressure on both inlet and outlet. Vapor pressures of water at 120°F and 140°C are 87.55 mm Hg and 149.44 mm Hg, respectively. a.) Calculate the rate (lbs/h) at which water is removed from...
A cooling system has an SHR of 0.5 with mixed air entering at Tdb=87 degrees and...

A cooling system has an SHR of 0.5 with mixed air entering at Tdb=87 degrees and 60% RH. Answer the following in SI units, a) what is the effective surface temperature of the coil b) if they contact factor is 0.9, what is the dry bulb temperature of the air exiting the coil? c) if the fan (after the coil) adds 1 BTU/lb of enthalpy, what is the supply air temperature? d) if the design condition is Tdb= 75 degrees...
56. Fresh air is introduced into a room at such a rate that the air in...

56. Fresh air is introduced into a room at such a rate that the air in the room is changed every 5 minutes. The room is 30 by 30 by 10 ft and the air in the room is at 70 °F with a percentage humidity of 60. Outside air at a temperature of 60 °F is used as air supply. The outside air is heated to the room temperature by a heat exchanger. How many BtU per hour must...

An air conditioner operating at steady state takes in moist air at 28ºC, 1 atm and...

An air conditioner operating at steady state takes in moist air at 28ºC, 1 atm and 70% relative humidity. The moist air first passes over a cooling coil in the dehumidifier unit and some water vapor is condensed. The rate of heat transfer between the moist air and the cooling coil is 38.69 kW. Both saturated moist air and condensate streams exit the dehumidifier unit at the same temperature. The moist air then passes through a heating unit, exiting at...
Air in a factory for drying apricots had dry bulb temperature of (Tdry) 25oC and wet...

Air in a factory for drying apricots had dry bulb temperature of (Tdry) 25oC and wet bulb temperature of (T wet) 15oC. What are the RH, dew point, Humidity ratio, specific volume and vapour pressure values. Second we are drying 10 Kg apricots of 85% moisture in batch production ending up with 60 % moisture content using a fan that blows hot air. We measured the air characteristics and found that Tdry = 35 oC and Twet=28 oC. The fan...
One hundred pounds of wet air containing 0.10 lb H20 vapor per id of dry air...

One hundred pounds of wet air containing 0.10 lb H20 vapor per id of dry air is mixed with 50 lbs of another wet air containing 0.02 lb water vapor per lb dry air. Calculate the pounds of water vapor per pound dry air in the final mixture. (0.072)

Moist air is at 80F (26.67C) dry-bulb, 0.0150 lb-w/lb-da (0.0150 kg-w/kg-da) humidity ratio, pressure of 14.696...

Moist air is at 80F (26.67C) dry-bulb, 0.0150 lb-w/lb-da (0.0150 kg-w/kg-da) humidity ratio, pressure of 14.696 psia (101.35 kPa). Determine the dew-point temperature, relative humidity, volume in cu ft/lb-da (cu meters/kg-da), and enthalpy in Btu/lb-da (kJ/kg-da) using the moist air property tables and the ideal gas equations. What error is incurred using the ideal gas approach? Compare these results with the psychrometric charts (available in ASHRAE Fundamentals)

How much moisture per pound of dry air is removed by air entering moist grain at...

Homework Answers