![An electronic device operates in air at an ambient temperature of 22°C with a convection heat transfer coefficient of 85 W m K- To enhance cooling, aluminium 2024-T6 fins of length 40 mm and cross-section 2 mm x 2 mm will be mounted on one surface of the device. The finned surface measures 45 mm x 64 mm and the other surfaces are insulated. The device dissipates 95 W of heat. (i) Calculate the rate of heat transfer through one fin if the device is at 60°C. (b) (ii How many fins should be attached to the device to ensure that its operating temperature is 60°C or less? 13]](http://img.homeworklib.com/questions/6374e690-9075-11eb-b918-81120835b34e.png?x-oss-process=image/resize,w_560)
Homework Answers
Request Answer!
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
Add Answer to:
An electronic device operates in air at an ambient temperature of 22°C with a convection heat...
The solar radiation incident on the outside surface of an aluminum shading device is 1300 W/m2...
The solar radiation incident on the outside surface of an aluminum shading device is 1300 W/m2 . Aluminum absorbs 10% of the incident solar energy, and dissipates it by convection from the back surface and by combined convection and radiation from the outside surface. The convection heat transfer coefficient is 10 W/m2 ·K for both surfaces, and the ambient/surrounding temperature can be taken 20 °C for both convection and radiation. Assuming that the aluminum shade has a uniform temperature, determine...
An array of electronic chips is mounted within a sealed rectangular enclosure, and cooling is implemented...
An array of electronic chips is mounted within a sealed rectangular enclosure, and cooling is implemented by attaching an aluminum heat sink (k = 180 W/m-K). The base of the heat sink has dimensions of wi = wº = 100 mm, while the 6 fins are of thickness: = 10 mm and pitch S = 18 mm. The fin length is 1; = 50 mm, and the base of the heat sink has a thickness of Ls = 15 mm....
The heat that is conducted through a body must frequently be removed by other heat transfer...
The heat that is conducted through a body must frequently be removed by other heat transfer processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature T. The conductivity of the aluminum fin (k) and coefficient of heat convection of...
Cylindrical pin fins are used to increase the heat transfer from a flat plate of 100...
Cylindrical pin fins are used to increase the heat transfer from a flat plate of 100 mm × 100 mm. Four hundred fins are added to the plate. Each fin is 10-mm long, has a diameter of 2 mm, a thermal conductivity of 180 W/m∙K, and a fin efficiency of 90%. The plate is at Tb = 85°C and the ambient temperature is T∞ = 20°C. Convection occurs at the fin tips, and the convection heat transfer coefficient for the...
finite element method 2. Aluminum fins with rectangular profiles (5 mm wide and 1 mm thick) are used to remove heat...
finite element method
2. Aluminum fins with rectangular profiles (5 mm wide and 1 mm thick) are used to remove heat from a surface whose temperature is 150°C. The temperature of ambient air is 20°C. The thermal conductivity of aluminium is 168 W/m.K. The natural convective coefficient associated with the surrounding air is 35 W/m2.K. The fins are 150 mm long and the heat loss from the tip of the fin may be neglected. (a) Determine the temperature distribution along...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 7...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
(c) Steam flows a pipe of external diameter 30 mm, where the pipe outer surface temperature...
(c) Steam flows a pipe of external diameter 30 mm, where the pipe outer surface temperature is 130oC. Circular annular fins (k = 180 W·m-1·K-1) of outer diameter 60 mm and thickness 1 mm are fitted tightly to the pipe. Heat is transferred by convection (h=10 W·m-2·K-1) to the surrounding air at 20oC. (i) Determine the efficiency of a single fin. (ii) Determine the heat transfer rate for a single fin. (8 marks) (6 marks) (iii) Determine the effectiveness of...
2. Straight metal fins (k = 100 W/m°C) with rectangular profile protrude from a l m...
2. Straight metal fins (k = 100 W/m°C) with rectangular profile protrude from a l m high wall. The wall is maintained at 200 °C and exposed to a convection environment at 25°C with h = 20 W/m² °C. The fins have a length (L) of 8 cm and a thickness (1) of 3 mm. The space between two adjacent fins is 2 mm. Calculate the following for per unit depth of wall: (a) the fin efficiency, (8 points) (b)...
blem 4 (20 pts) A square chip that is 12.7mm on a side has a maximum allowable chip operating temperature -75°C. To dissipate heat produced in the chip, a 4 x 4 array of copper (k-400 W/m.K) pin fins...
blem 4 (20 pts) A square chip that is 12.7mm on a side has a maximum allowable chip operating temperature -75°C. To dissipate heat produced in the chip, a 4 x 4 array of copper (k-400 W/m.K) pin fins is proposed to be etallurgically joined to the outer surface of the chip. The convection coefficient is h-250 W/m'K and ambient air mperature isTo-20°C. The pin fin dimeter is D,-1.5mm and length is L,-16mm. Assuming steady-state uniform chip temperature Te-75°C and...
An array of electronic chips is mounted within a sealed rectangular enclosure, and cooling is implemented by attaching an aluminum heat sink (k = 180 W/m-K). The base of the heat sink has dimensions of wi = wº = 100 mm, while the 6 fins are of thickness: = 10 mm and pitch S = 18 mm. The fin length is 1; = 50 mm, and the base of the heat sink has a thickness of Ls = 15 mm....
The heat that is conducted through a body must frequently be removed by other heat transfer processes. For example, the heat generated in an electronic device must be dissipated to the surroundings through convection by means of fins. Consider the one-dimensional aluminum fin (thickness t 3.0 mm, width 20 cm, length L) shown in Figure 1, that is exposed to a surrounding fluid at a temperature T. The conductivity of the aluminum fin (k) and coefficient of heat convection of...
finite element method
2. Aluminum fins with rectangular profiles (5 mm wide and 1 mm thick) are used to remove heat from a surface whose temperature is 150°C. The temperature of ambient air is 20°C. The thermal conductivity of aluminium is 168 W/m.K. The natural convective coefficient associated with the surrounding air is 35 W/m2.K. The fins are 150 mm long and the heat loss from the tip of the fin may be neglected. (a) Determine the temperature distribution along...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
2. Straight metal fins (k = 100 W/m°C) with rectangular profile protrude from a l m high wall. The wall is maintained at 200 °C and exposed to a convection environment at 25°C with h = 20 W/m² °C. The fins have a length (L) of 8 cm and a thickness (1) of 3 mm. The space between two adjacent fins is 2 mm. Calculate the following for per unit depth of wall: (a) the fin efficiency, (8 points) (b)...
blem 4 (20 pts) A square chip that is 12.7mm on a side has a maximum allowable chip operating temperature -75°C. To dissipate heat produced in the chip, a 4 x 4 array of copper (k-400 W/m.K) pin fins is proposed to be etallurgically joined to the outer surface of the chip. The convection coefficient is h-250 W/m'K and ambient air mperature isTo-20°C. The pin fin dimeter is D,-1.5mm and length is L,-16mm. Assuming steady-state uniform chip temperature Te-75°C and...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago