a 210MW industrial power plant generates electricity at 12KV. the voltage is then stepped up to...
a 210MW industrial power plant generates electricity at 12KV. the voltage is then stepped up to 1200KV using a transformer and transmitted to a far a way city down a line 2x10^5 m long.
a) what is the current flowing in the transmission life?
b) assuming the resistance of a standard power line is 0.001 ohms/m. what is the power lost in the line transmitting the 1200KV electricity to the city?
c) if the voltage is not stepped up, what power would be lost in the line?
Homework Answers
Add Answer to:
a 210MW industrial power plant generates electricity
at 12KV. the voltage is then stepped up to...
helpppppp QUESTION 'If the voltage is stepped up to double the amount in this problem, by...
helpppppp
QUESTION 'If the voltage is stepped up to double the amount in this problem, by what factor is the percentage power loss changed? O2 O no change 1 4 PRACTICE IT Use the worked example above to help you solve this problem. A generator at a utility company produces 1.02 X 102 A of current at 3.70 x 10 V. The voltage is stepped up to 2.18 x 105 v by a transformer before being sent on a high-voltage...
A small power plant produces a voltage of 10 V and 100 A. The voltage is...
A small power plant produces a voltage of 10 V and 100 A. The voltage is stepped up to 120 by a transformer before it is transmitted to a substation. The resistance of the transmission line between the power plant and the substation is 75 ohm. What is the current in the transmissions line from the plant to the substation. please show all work
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage...
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 330 kV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 1.20 Ω, what are the old and new line power losses (in MW)? old line losses. new line losses physics
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage...
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 350 KV. The secondary of this transformer is being replaced so that its output can be 765 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.750, what are the old and new line power losses (in MW)? old line losses new line losses MW MW
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage...
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 345 kV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.950, what are the old and new line power losses (in MW)? old line losses X MW new line losses 198 X MW
A large power plant generates electricity at 12.0 KV. Its old transformer once converted the voltage...
A large power plant generates electricity at 12.0 KV. Its old transformer once converted the voltage to 340 KV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.050, what are the old and new line power losses (in MW)? old line losses 1.7734 MW new line losses 3.413 MW 7
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage...
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 325 kV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.150, what are the old and new line power losses (in MW)? old line losses MW new line losses MW 1 Submit Answer
a power plant has 4 smaller substations. the main power plant generates 420 MW of electricity...
a power plant has 4 smaller substations. the main power plant generates 420 MW of electricity and is distributed to these substations using high voltage power lines. Each line carries 140 kV while having .20 Ohms resistance in each line. what is the power loss in each transmission line? let the power be distributed equally betewen the 4 substations. 12000 kW 2000 kW 900 kW 4000 kW 450 kW 110 kW
Suppose a large power plant generates electricity at 12.0 kV. Its old transformer once converted this voltage to kV. The secondary coil of this transformer is being replaced so that its output can be...
Suppose a large power plant generates electricity at 12.0 kV. Its old transformer once converted this voltage to kV. The secondary coil of this transformer is being replaced so that its output can be 730 kV for more efficient cross-country transmission on upgraded transmission lines V 315 kV V2 730 kV - 50% Part (a) If the overall power output is 1000.0 MW and line resistance is 2.00 Ω, what was the power loss, in watts, in the old power...
An AC power generator produces 48 A (rms) at 3,600 V. The voltage is stepped up...
An AC power generator produces 48 A (rms) at 3,600 V. The voltage is stepped up to 100,000 V by an ideal transformer, and the energy is transmitted through a long-distance power line that has a resistance of 146 Ω. What percentage of the power delivered by the generator is dissipated as heat in the power line? %
helpppppp
QUESTION 'If the voltage is stepped up to double the amount in this problem, by what factor is the percentage power loss changed? O2 O no change 1 4 PRACTICE IT Use the worked example above to help you solve this problem. A generator at a utility company produces 1.02 X 102 A of current at 3.70 x 10 V. The voltage is stepped up to 2.18 x 105 v by a transformer before being sent on a high-voltage...
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 350 KV. The secondary of this transformer is being replaced so that its output can be 765 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.750, what are the old and new line power losses (in MW)? old line losses new line losses MW MW
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 345 kV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.950, what are the old and new line power losses (in MW)? old line losses X MW new line losses 198 X MW
A large power plant generates electricity at 12.0 KV. Its old transformer once converted the voltage to 340 KV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.050, what are the old and new line power losses (in MW)? old line losses 1.7734 MW new line losses 3.413 MW 7
A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage to 325 kV. The secondary of this transformer is being replaced so that its output can be 775 kV for more efficient cross-country transmission on upgraded transmission lines. If the power output is 1,000 MW and line resistance is 2.150, what are the old and new line power losses (in MW)? old line losses MW new line losses MW 1 Submit Answer
Suppose a large power plant generates electricity at 12.0 kV. Its old transformer once converted this voltage to kV. The secondary coil of this transformer is being replaced so that its output can be 730 kV for more efficient cross-country transmission on upgraded transmission lines V 315 kV V2 730 kV - 50% Part (a) If the overall power output is 1000.0 MW and line resistance is 2.00 Ω, what was the power loss, in watts, in the old power...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago