Question

A very large tank is filled to a depth of 286 cm with oil that has...

A very large tank is filled to a depth of 286 cm with oil that has a density of 860 kg/m3 and a viscosity of 180 mPa·s. If the container walls are 5.5 cm thick, and a cylindrical hole of radius 0.90 cm is bored through the base of the container, what is the initial volume flow rate of the oil through the hole?

______L/s

0.693 L/s was marked incorrect.

0 0
Add a comment Improve this question Transcribed image text
Answer #1

According to poiseuilles law, the pressure difference is given by 8jdR the initial volume flow rate of oil through the hole

Add a comment
Know the answer?
Add Answer to:
A very large tank is filled to a depth of 286 cm with oil that has...
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for? Ask your own homework help question. Our experts will answer your question WITHIN MINUTES for Free.
Similar Homework Help Questions
  • A very large tank is filled to a depth of 250 cm with oil that has...

    A very large tank is filled to a depth of 250 cm with oil that has a density of 860 kg/m3 and a viscosity of 0.180 Pa · s. The base of the tank is made of a material that is 5.00 cm thick and a hole is drilled through the base with a radius of 0.750 cm. The tank is open to the air at the top. What is the initial volume flow rate of the oil through the...

  • A tank is filled with incompressible oil to a depth of (h_1) 6.43 m. The tank...

    A tank is filled with incompressible oil to a depth of (h_1) 6.43 m. The tank is being drained via a horizontal pipe (radius 1.92 cm), attached at a height of (h-2) 0.789 m above the tank bottom. Oil is flowing out through the pipe at a rate of 2.34 times 10^-3 m^3/s, but the tank is so large that the descent speed of the oil level at the top is negligible (almostequalto 0). The gauge pressure in the drain...

  • 4. A tank is filled with incompressible oil to a depth of (h) 6.43 m open...

    4. A tank is filled with incompressible oil to a depth of (h) 6.43 m open tank The tank is being drained via a horizontal pipe that is attached at a height of (h2) 0.789 m above the tank bottom. Oil is flowing out of the tank into the pipe at a rate of 2.34 x 10 m'/s, but the tank is so large that the descent speed of the oil level at the top is negligible (0) The gauge...

  • Solve the following problems please A container is filled to a depth of 19.0 cm with...

    Solve the following problems please A container is filled to a depth of 19.0 cm with water. On top of the water floats a 35.0-cm-thick layer of oil with specific gravity 0.900. What is the absolute pressure at the bottom of the container? A cube of wood having an edge dimension of 18.9 cm and a density of 645 kg/m3 floats on water, What is the distance from the horizontal top surface of the cube to the water level? what...

  • Consider a very small hole in the bottom of a tank 29 cm in diameter filled...

    Consider a very small hole in the bottom of a tank 29 cm in diameter filled with water to a height of 50 cm. Find the speed at which the water exits the tank through the hole. A. 9.8 m/s B. 15.1 m/s C. 18.2 m/s D. 3.13 m/s Thank you!!! Please show all work!

  • A cylindrical tank is being filled with water. The tank is initially empty but then water...

    A cylindrical tank is being filled with water. The tank is initially empty but then water begins to flow into it at a rate of 62.00 kg/min. There is a small hole of radius r = 0.7000 cm at the bottom of the tank where water can escape. Because the flow rate of water leaving the hole is initially at a slower rate than water entering the tank, the water level rises. The average velocity of water leaving through the...

  • 1. Engine oil that is classified as SAE 5W-30 has a density of 859 kg/m3 and...

    1. Engine oil that is classified as SAE 5W-30 has a density of 859 kg/m3 and a viscosity of 6.60 Pa⋅s at a temperature of –30 °C.   The oil is poured through a funnel with a neck that is 10.0 cm long and 1.00 cm in diameter. By continually pouring oil from a jug, the level of the oil is kept at a height of 10.0 cm above the neck of the funnel. (a) Calculate the pressure at the top...

  • 1. A block of aluminum that has dimensions 1.16 cm by 3.00 cm by 5.00 cm...

    1. A block of aluminum that has dimensions 1.16 cm by 3.00 cm by 5.00 cm is suspended by a thread from a spring scale. Density of aluminum is 2702 kg /m3. A beaker full of oil (density 8.50 × 105 g/cm3) rests on a second scale, which reads 460.0 g. The block is then lowered so it is fully submerged in oil without touching the bottom of the beaker. What is the reading on the spring scale supporting the...

  • A U-tube contains liquid of unknown density. An oil of density 770 kg/m³ is poured into...

    A U-tube contains liquid of unknown density. An oil of density 770 kg/m³ is poured into one arm of the tube until the oil column is 13.5 cm high. The oil-air interface is then 4.5 cm above the liquid level in the other arm of the U-tube. Find the density of the liquid. A raft is made of 11 logs lashed together. Each is 38.0 cm in diameter and has a length of 7.00 m. How many people (whole number)...

  • 9 show wrk A string that is 2.0 meters long is fixed at both ends and...

    9 show wrk A string that is 2.0 meters long is fixed at both ends and tightened until the wave speed is 18 m/s. What is the frequency of the standing wave shown in the figure? 27 Hz 110 Hz 54 Hz 81 Hz A 13,000-N vehicle is to be lifted by a 25-cm diameter hydraulic piston. What force needs to be applied to a 5.0 cm diameter piston to accomplish this? Assume the pistons each have negligible weight. 5200...

ADVERTISEMENT
Free Homework Help App
Download From Google Play
Scan Your Homework
to Get Instant Free Answers
Need Online Homework Help?
Ask a Question
Get Answers For Free
Most questions answered within 3 hours.
ADVERTISEMENT
ADVERTISEMENT