For this problem, the professor said that
the lumped parameter method must not be used. How do you solve this
without the lumped parameter method?
Homework Answers
Hi here is the solution for your question. I hope I could help you in future also. If anything is not clear to you please let me know before giving your valuable feedback.
I would like to elaborate that in the future.
Thanks
Solution
i
hope it will help you. If I missed anything please let me know
before giving your rating.
Thanks
Add Answer to:
For this problem, the professor said that
the lumped parameter method must not be used. How...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 7...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
SKMM 3433 A solid body which is initially at a uniform temperature Tİ is exposed to an ambient air at temperature Te. Explain how you would determine the maximum amount of heat that can be transfe...
SKMM 3433 A solid body which is initially at a uniform temperature Tİ is exposed to an ambient air at temperature Te. Explain how you would determine the maximum amount of heat that can be transferred to the body. What does this amount of heat represent? Q2. (a) (5 marks) A wall ofa room is made of lightweight concrete material (ρ= 1600 kg/m.に0.79 W/m K and cp 0.84 kJ/kg K) with a thickness of 150 mm. Initially the wall is...
Consider a long solid bar (k=30W/m K and α 12X10-6 m /s) ofAare cro s section that is initially at uniform room tempera...
Consider a long solid bar (k=30W/m K and α 12X10-6 m /s) ofAare cro s section that is initially at uniform room temperature of 150° C. The cross seftion of the bar is 20 cm X 20 cm in size. All four side of the bar are subjected to donJeation td the ambient air at T-25oC with a heat transfer coefficient of h t45 W/m2K. Using the explicit finite difference method with a mesh Δ x = Δ y-10cm</determine the...
Problem Wall with Strip Heater The air inside a chamber is measured to be 50C and used to convectively heat a wall (h 2...
Problem Wall with Strip Heater The air inside a chamber is measured to be 50C and used to convectively heat a wall (h 20 w/m2 K). The wall (thermal conductivity of 4 W/m K) is 200 mm thick and has a uniform heat generation of 1000 W/m2. To prevent any heat generated within the wall from being lost to the outside of the chamber a very thin electrical strip heater is placed on the outer wall to provide a uniform...
Problem 3 A portable thermocouple is used to measure the air temperature inside of a sauna....
Problem 3 A portable thermocouple is used to measure the air temperature inside of a sauna. The sauna is unbearably hot and a person can only stay for 20 seconds, during which the temperature reading keeps on changing and a steady temperature is not reached. Leaving the thermocouple reader in the sauna for extended period of time has been deemed too risky for an electronics device Fortunately, a transient heat transfer model can be used to extract the temperature in...
This is for static air don't just copy from others', this is a different problem. 1. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature...
This is for static air don't just copy from others', this is a
different problem.
1. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature of 500 K. The cylinder is left to cool in a large room of static air at 300 K. Calculate a) the average convective heat transfer coefficient at the beginning of the cooling process when the initial temperature of the cylinder is 500 K, and 10] 15]...
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed...
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 "C resulting in the convective coefficient, h = 114 W/m' K. The relevant properties of mild steel are given as follows: Density p= 7850 kg/m . Specific heat c = 475 J/kg K and thermal diffusivity a = 0.043 m/hr Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 °C to 95°C. [7 marks] (ii)...
1. 1.08x106 grams/h of a superheated fluid flows through a pipe in a power plant. The...
1. 1.08x106 grams/h of a superheated fluid flows through a pipe in a power plant. The pipe is 1000 cm long, has an inner diameter of 0.05m and a wall thickness of 0.6 cm. The pipe has a thermal conductivity of 0.0017 kW/mK, and the inner pipe surface is at a uniform temperature of 393K. The temperature drop between the inlet and exit of the pipe is 7K, and the constant pressure specific heat of vapor is 2190 J/kgK. If...
sir which thing is not given..you can assume..and kindly sir post answer fastly Project Statement A...
sir
which thing is not given..you can assume..and kindly sir post
answer fastly
Project Statement A cold storage is to be built in Lahore city with given dimensions in the figure below. It is required that the inside temperature shouldn't exceed -2 °C and inside average convection heat transfer coefficient is estimated to be 7 W/mp. °C. You are given a task to insulate the walls of cold storage with some suitable insulation which can maintain the given conditions inside...
Homework #4 A motor is constructed using windings that surround laminated iron poles. You have been...
Homework #4 A motor is constructed using windings that surround laminated iron poles. You have been asked to estimate the maximum temperature that will occur within the windings. The windings and poles are both approximated as being cylindrical, as shown below. 2 cm F-1em L-2 cm T-25°C h-25 W/m-K windings T50°C k-1 W/m-K -1x10 Wim The windings are a complicated composite formed from copper conductor, insulation and air that fills the gaps between adjacent wires. However, in most models, the...
G4 Problem Statement: Circular fins of uniform cross section, with diameter of 14 mm and length 70 mm are attached to the wall with surface temperature o C. The fin is made of material with thermal conductivity of 210 W/mk, and exposed to an ambient air condition of 24 °C and the convection heat transfer coefficient of 190 W/m2k. f 300 1- Plot the temperature variation for the following boundary conditions a- Infinitely long fin b- Adiabatic fin tip c-...
SKMM 3433 A solid body which is initially at a uniform temperature Tİ is exposed to an ambient air at temperature Te. Explain how you would determine the maximum amount of heat that can be transferred to the body. What does this amount of heat represent? Q2. (a) (5 marks) A wall ofa room is made of lightweight concrete material (ρ= 1600 kg/m.に0.79 W/m K and cp 0.84 kJ/kg K) with a thickness of 150 mm. Initially the wall is...
Consider a long solid bar (k=30W/m K and α 12X10-6 m /s) ofAare cro s section that is initially at uniform room temperature of 150° C. The cross seftion of the bar is 20 cm X 20 cm in size. All four side of the bar are subjected to donJeation td the ambient air at T-25oC with a heat transfer coefficient of h t45 W/m2K. Using the explicit finite difference method with a mesh Δ x = Δ y-10cm</determine the...
Problem Wall with Strip Heater The air inside a chamber is measured to be 50C and used to convectively heat a wall (h 20 w/m2 K). The wall (thermal conductivity of 4 W/m K) is 200 mm thick and has a uniform heat generation of 1000 W/m2. To prevent any heat generated within the wall from being lost to the outside of the chamber a very thin electrical strip heater is placed on the outer wall to provide a uniform...
Problem 3 A portable thermocouple is used to measure the air temperature inside of a sauna. The sauna is unbearably hot and a person can only stay for 20 seconds, during which the temperature reading keeps on changing and a steady temperature is not reached. Leaving the thermocouple reader in the sauna for extended period of time has been deemed too risky for an electronics device Fortunately, a transient heat transfer model can be used to extract the temperature in...
This is for static air don't just copy from others', this is a
different problem.
1. A very long horizontal cylinder of Unobtainium, of diameter 100 mm, is initially at a uniform temperature of 500 K. The cylinder is left to cool in a large room of static air at 300 K. Calculate a) the average convective heat transfer coefficient at the beginning of the cooling process when the initial temperature of the cylinder is 500 K, and 10] 15]...
Q2 (a) A 12 mm diameter mild steel sphere (k = 42.5 W/m K) is exposed to cooling airflow at 27 "C resulting in the convective coefficient, h = 114 W/m' K. The relevant properties of mild steel are given as follows: Density p= 7850 kg/m . Specific heat c = 475 J/kg K and thermal diffusivity a = 0.043 m/hr Determine: (i) Time required to cool the sphere (lumped parameter system) from 540 °C to 95°C. [7 marks] (ii)...
sir
which thing is not given..you can assume..and kindly sir post
answer fastly
Project Statement A cold storage is to be built in Lahore city with given dimensions in the figure below. It is required that the inside temperature shouldn't exceed -2 °C and inside average convection heat transfer coefficient is estimated to be 7 W/mp. °C. You are given a task to insulate the walls of cold storage with some suitable insulation which can maintain the given conditions inside...
Homework #4 A motor is constructed using windings that surround laminated iron poles. You have been asked to estimate the maximum temperature that will occur within the windings. The windings and poles are both approximated as being cylindrical, as shown below. 2 cm F-1em L-2 cm T-25°C h-25 W/m-K windings T50°C k-1 W/m-K -1x10 Wim The windings are a complicated composite formed from copper conductor, insulation and air that fills the gaps between adjacent wires. However, in most models, the...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago