A Wheatstone bridge is comprised of 4 resistors, 120 Ohm nominal resistance each. Exactly one of...
A Wheatstone bridge is comprised of 4 resistors, 120 Ohm nominal resistance each. Exactly one of these resistors (R3) is a strain gauge, gauge factor is 2.0. The supply voltage is 3 V. The bridge is in balance when the strain gauge is unloaded. Under loading, the strain gauge is subject to strain (epsilon=0.0025).
- In microstrain, the strain is
- Find the voltage output of the bridge in millivolts
Homework Answers
Add Answer to:
A Wheatstone bridge is comprised of 4 resistors, 120 Ohm nominal
resistance each. Exactly one of...
A Wheatstone Bridge has one active gage that is located in the R3 position as we...
A Wheatstone Bridge has one active gage that is located in the R3 position as we have set up the Wheatstone Bridge in the class notes. The gage has a resistance of 500 ohms and the other resistors in the Wheatstone Bridge are 500 ohms. The gage factor of the gage is 2.10. The Wheatstone Bridge has an output of 0.008 V. The power supply is 5.00 V. Find: a) What is the strain be measured by the long formula?...
3. Two different types of strain gauges with a nominal resistance of 120 2 are both...
3. Two different types of strain gauges with a nominal resistance of 120 2 are both used to measure an axial strain in Figure 3. They are connected to a Wheatstone bridge (the lead wire effect is negligible) at R1 and R3 R3 is a nickel wire strain gauge with a gauge factor -12.1 and R1 is a nicrome wire strain gauge with a gauge factor 2.1. The bridge has a supply voltage of 4.5V and two fixed resistors R2...
A 120 ? strain gauge with a gauge factor of 2 is mounted on a beam...
A 120 Ω strain gauge with a gauge factor of 2 is mounted on a beam and connected in a Wheatstone bridge as shown in Figure Q1a. The bridge is powered by a 12 V DC supply in series with a 510 Ω resistance. The beam is subject to a tensile force, which produces an axial strain of 940 microstrain measured by the strain gauge .a) Under no strain, calculate the current in the strain gauge and the power dissipated by the...
3. A resistance strain gauge with R-120 ohm and a gauge factor of 2 is placed...
3. A resistance strain gauge with R-120 ohm and a gauge factor of 2 is placed in an equal-arm Wheatstone bridge in which all the resistances are equal to 120 ohm. If the maximum gauge current is to be 0.05A, what is the maximum allowable bridge excitation voltage?
2) One arm of a Wheatstone bridge is a 50 k2 strain gauge (S = 2.0)....
2) One arm of a Wheatstone bridge is a 50 k2 strain gauge (S = 2.0). This strain gauge is bonded to a metal fixture for tensile loading, and the metal has a Young's Modulus E-2.5 MPa. The other 3 arms are fixed 50 kO resistors. The bridge is powered by 5Vv DC as shown, and Eo is the output voltage. a) Derive a relationship for Eo as a function of tensile stress o in the metal substrate, ΔL ....
Quarter Bridge configuration on Wheatstone Bridge has only one sensor. If with its configuration voltage is...
Quarter Bridge configuration on Wheatstone Bridge has only one sensor. If with its configuration voltage is given 100 Volt, R1 = 80 Ω R2 = 80 Ω R3 = 480 Ω With R1 and R3 are on the upper part of Wheatstone Bridge, R2 and R4 are on the lower part of Wheatstone Bridge, determine: a) Schematic of Wheatstone Bridge, strain gauge sensor, and Op-Amp for measuring a strain b) R4 so the voltage of Wheatstone is balanced c) Using...
You are using a half-bridge circuit to measure the strain on a beam. Both strain gages have nomin...
please help!
You are using a half-bridge circuit to measure the strain on a beam. Both strain gages have nominal resistances of 120 Ω and strain gage factors of 1.92. The other two resistors used in the circuit have nominal resistances of 120 Ω An adjustable power supply is used to apply a 5.00 V source voltage to the bridge circuit. Prior to loading the beam, the bridge is initially balanced. a. If the beam experiences an axial strain of...
As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the bottom of a beam...
As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the bottom of a beam to measure the strain on the surface of the beam. The beam's Young's Modulus is 193 GPa. A wheatstone bridge circuit was constructed as sketched in Fig. 2. Al resistors including the gage itself is 1202. Supply voltage is 5.0 V DC. The bridge is initially balanced when there is no load (a). when a downward load is added, will...
P2: (40points) As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the b...
P2: (40points) As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the bottom of a beam to measure the strain on the surface of the beam. The beam's Young's Modulus is 193 GPa. A wheatstone bridge circuit was constructed as sketched in Fig. 2. All resistors including the gage itself is 12002. Supply voltage is 5.0 V DC. The bridge is initially balanced when there is no load Strain gage Fig.1 Ri R2 DC...
1.) A aluminum cylinder with modulus of elasticity 69GPa and a diameter of 15mm is loaded...
1.) A aluminum cylinder with modulus of elasticity 69GPa and a diameter of 15mm is loaded in tension with an axial load of 30kN. If the strain gauge factor is 2.06 and the nominal resistance of the strain gauge is 1200 what is the change in resistance of the strain gauge from the unloaded state to the loaded state? a) b) If the excitation voltage is VEx 10V and all other resistors in the Wheatstone Bridge are 1200, what is...
3. Two different types of strain gauges with a nominal resistance of 120 2 are both used to measure an axial strain in Figure 3. They are connected to a Wheatstone bridge (the lead wire effect is negligible) at R1 and R3 R3 is a nickel wire strain gauge with a gauge factor -12.1 and R1 is a nicrome wire strain gauge with a gauge factor 2.1. The bridge has a supply voltage of 4.5V and two fixed resistors R2...
A 120 Ω strain gauge with a gauge factor of 2 is mounted on a beam and connected in a Wheatstone bridge as shown in Figure Q1a. The bridge is powered by a 12 V DC supply in series with a 510 Ω resistance. The beam is subject to a tensile force, which produces an axial strain of 940 microstrain measured by the strain gauge .a) Under no strain, calculate the current in the strain gauge and the power dissipated by the...
3. A resistance strain gauge with R-120 ohm and a gauge factor of 2 is placed in an equal-arm Wheatstone bridge in which all the resistances are equal to 120 ohm. If the maximum gauge current is to be 0.05A, what is the maximum allowable bridge excitation voltage?
2) One arm of a Wheatstone bridge is a 50 k2 strain gauge (S = 2.0). This strain gauge is bonded to a metal fixture for tensile loading, and the metal has a Young's Modulus E-2.5 MPa. The other 3 arms are fixed 50 kO resistors. The bridge is powered by 5Vv DC as shown, and Eo is the output voltage. a) Derive a relationship for Eo as a function of tensile stress o in the metal substrate, ΔL ....
please help!
You are using a half-bridge circuit to measure the strain on a beam. Both strain gages have nominal resistances of 120 Ω and strain gage factors of 1.92. The other two resistors used in the circuit have nominal resistances of 120 Ω An adjustable power supply is used to apply a 5.00 V source voltage to the bridge circuit. Prior to loading the beam, the bridge is initially balanced. a. If the beam experiences an axial strain of...
As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the bottom of a beam to measure the strain on the surface of the beam. The beam's Young's Modulus is 193 GPa. A wheatstone bridge circuit was constructed as sketched in Fig. 2. Al resistors including the gage itself is 1202. Supply voltage is 5.0 V DC. The bridge is initially balanced when there is no load (a). when a downward load is added, will...
P2: (40points) As shown below (Fig.1), A strain gage with gage factor of 2.02 is mounted on the bottom of a beam to measure the strain on the surface of the beam. The beam's Young's Modulus is 193 GPa. A wheatstone bridge circuit was constructed as sketched in Fig. 2. All resistors including the gage itself is 12002. Supply voltage is 5.0 V DC. The bridge is initially balanced when there is no load Strain gage Fig.1 Ri R2 DC...
1.) A aluminum cylinder with modulus of elasticity 69GPa and a diameter of 15mm is loaded in tension with an axial load of 30kN. If the strain gauge factor is 2.06 and the nominal resistance of the strain gauge is 1200 what is the change in resistance of the strain gauge from the unloaded state to the loaded state? a) b) If the excitation voltage is VEx 10V and all other resistors in the Wheatstone Bridge are 1200, what is...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago