- Scan Question
- + Post
- Get Coins
What is the output of a 4-bit analog to digital convert if the low reference voltage is 0V, the high reference voltage is 5V, and the analog input voltage is 5V? Give your answer as decimal number.
4-bit analog to digital converter outputs binary number in range of 0000 to 1111 (i.e. 0 to 15).
Since low reference voltage is 0V which corresponds to binary 0000 or decimal 0.
Since high reference voltage is 5V which corresponds to binary 1111 or decimal 15.
Hence analog input voltage of 5V to 4-bit ADC will output decimal 15.
What is the output of a 4-bit analog to digital convert if the low reference voltage...
DILU 2d) Analog and Digital Signals i. A 10-bit linear analog-to-digital has reference voltage 3.3 V such that it operates correct. for input voltage Vin in the range 0 < Vin < 3.3 V. What is its output, in unsigned binary when Vin = 2.267 V? - ii. What is the quantisation error (in volts) for a 10-bit linear analog-to-digital converter with reference voltage 3.3 V?
Problem 6 Consider a 10-bit dual slop analog-to-digital converter, with reference voltage of -1V, and a clock frequency of 1 KHz. The integrating capacitor charges to -8V in the time t, to t2, and discharges at a rate of 10V/sec in the time t2 to t3. What is the input voltage if the binary reading is 1100100000. Problem 6 Consider a 10-bit dual slop analog-to-digital converter, with reference voltage of -1V, and a clock frequency of 1 KHz. The integrating...
You need to design for-bit R-2R network digital to analog converter using S k? and io with reference voltage 16 volt. i) Sketch a circuit of this digital to analog converter. i) Calculate the output voltage for an input of 1010, 1101 and 0110 Calculate output voltage resolution
(a) We have an analogue to digital converter (ADC) described as 8 bit, with a 3V reference and 0V offset. What is the resolution, expressed in millivolts?  (b) For an input voltage of 0.6V, what is the digital output value of the ADC described in (a)? Express your answer in both binary and hexadecimal.  (c) An industrial oven has a thermometer that outputs a voltage from 0 to 1V for a corresponding range of temperatures of 0 to...
2. An analog to digital converter is 10-bit and can read in values from 0V to 5V. What value would be produced by the converter when reading in a signal at 4 volts? a. 592 b. 223 c. 1247 d. 818
Determine the digital output of a 10-bit A/D convertor with 0 to 5 V analog voltage range if subjected to the following analog inputs. a.1 V b.2.5V c.5 V
11. The MC1408 is an 8-bit D/A converter with equal reference and output resistors. If the reference voltage is 5.0 V. 4,4,4,4,41 a. What is the voltage step size? Solution Use the circuit below to answer the three questions·LEDI is Yellow andLED2 is AMBER and typically, Vr 1.85 V 8.5 mA. The NAND gates are 741S00 with 0.35 V as typical VoL. Show complete work in the space provided 14.6, 4 a. If A10 and Ai = 1, which LED...
What is the Output Voltage of a 12 Bit DAC with a 10 V Reference Voltage for the Following Inputs? Conversion Resolution __________________ Input 110110001110 Voutput _____________________________ Input 100101111011 Voutput ______________________
plz do not answer it , if you do not know how to use pspice 3. Refer to Fig. 1 in the handout; obtain the circuit output in PSpice for some of the digital input combinations given in Table. 1. Assume that 5V analog input and 0V analog input correspond to a digital ‘1' and a digital .0', respectively, and that the DAC outputs are converted so that positive voltages are obtained. Also, a. What is the range, precision and...
plz give correct answer Q5. We are collecting an analog signal ranging from oV to SV with a 3-bit analog-to-digital converter. Calculate the discrete voltage range and fill in the table, and calculate the analog quantization size (resolution). 0.5pt Output states Diserete voltage range IV Analog quantization size (resolution)- 06. Calculate the resolutions for the 2-bit, S-bit, 12-bit, and 16-bit analog-digital converter: Input and output signal ranges from-10V to 10V. 0.5pt 1) 2-bit: 2) 8-bit: 3) 12-bit: 4) 16-bit: