A process involving natural gas requires 475 grams but is only 75% efficient. How much natural...

Question

Question

A process involving natural gas requires 475 grams but is only 75% efficient. How much natural gas will actually have to be supplied?

science chemistry

Answer 1

Answer #1

Answer 2

Similar Homework Help Questions

How much LiOH (in grams) is needed to prepare 475 mL of solution with a pH...

How much LiOH (in grams) is needed to prepare 475 mL of solution with a pH of 11.2 ?
Problem: Bapco needs to burn natural-gas fuel that contains 75 mol% methane, 15 mol% ethane, and ...

Problem: Bapco needs to burn natural-gas fuel that contains 75 mol% methane, 15 mol% ethane, and 10 mol% nitrogen. The following two reactions takes place: CH4(g) 20209) CO2(0) 2H2o) C2H6 (g) + 3.502(g) 2C02(g)3H20 (g) a) What is the standard heat of combustion (kJ/mol) of the fuel at 25 oC with water(g) as a product b) The fuel is supplied to a furnace with 60% excess air, both entering at 250C. The products leave at 600°C. If the combustion is...
A natural gas power plant uses 505Mg of natural gas per day (volume converted to weight...

A natural gas power plant uses 505Mg of natural gas per day (volume converted to weight via density ). The energy value of the natural gas is 37.3 MJ/kg. The plant produces 1.81 *10^6kWh of electricity each day a.) what is the efficiency of the plant b.) how much energy is lost please include all base equations engineering principles and general formulas and use. c.) assuming all energy is converted to heat how much water is needed to absorb the...

How much KCL will dissolve in 150 grams of water at 75 degrees celcuis?

How much KCL will dissolve in 150 grams of water at 75 degrees celcuis?
(e) The energycontent of natural gas is about 39 MJ/m3 (where 1 MJ = 106) Suppose...

(e) The energycontent of natural gas is about 39 MJ/m3 (where 1 MJ = 106) Suppose you need to produce 5.0 x 103J of energy. How much volume (in m3) of natural gas do you need? (f) Sea water has a typical salinity of 39 g/L in dissolved salts. Suppose you have 125.0 mL of sea water. How many grams of dissolved salts can you recover? (g) The atmospheric pressure at the surface of planet Mars is 7.5 mbar (as...
How much work is done on the gas in the process shown in the figure ?

How much work is done on the gas in the process shown in the figure?

It requires 0.86 aJ to ionize a single gas phase Li atom. How much energy is...

It requires 0.86 aJ to ionize a single gas phase Li atom. How much energy is required to ionize 6.022 × 10^23 gas phase Li atoms?
When 10.0 g of hydrogen gas reacts with 40.0 g of nitrogen gas, how much ammonia...

When 10.0 g of hydrogen gas reacts with 40.0 g of nitrogen gas, how much ammonia gas forms? Which substance is the limiting reactant? If a chemist runs the reaction knowing they should obtain a percent yield of 78.5% and must produce a total of 30.5 grams of ammonia, how many grams of nitrogen should they start with if they have an excess amount of hydrogen?
7. Given: Natural gas (CH4) must have the hydrogen sulfide (H2S) removed before it is burned....

7. Given: Natural gas (CH4) must have the hydrogen sulfide (H2S) removed before it is burned. One way to do this is to pass the natural gas through a bed of zinc oxide (ZnO) (molecular weight of 81, density of 1.11 g/cm3), where following reaction takes place. Outflow ZnO + H2S ? ZnS + H2O You have 1 million standard cubic feet of natural gas per day at 492R and 1 atm with 0.82 mol% H2S. You need to design...

Please explain the process of solving the problem. 16) A gas cylinder contains only the gases...

Please explain the process of solving the problem. 16) A gas cylinder contains only the gases radon, nitrogen, and helium. The radon has a pressure of 222 torr while the nitrogen has a pressure of 446 torr. If the total pressure inside the container is 771 torr, what is the pressure (in atm) that is due to the helium? 17) What is the temperature (in degrees C) of 2.48 moles of gas stored in a 30.0 L container at 1559...