An information signal is of the form s(t) = sin(2*pi*t)/t. The signal amplitude modulates a carrier of frequency 10Hz.
Find and sketch the Waveform and Fourier transform of the transmitted signal before and after AM modulation. For AM modulation you can consider the simple case of DSB format (or double-sideband suppressed carrier modulation).
MATLAB CODE
fs=5000;
t=0:1/fs:5;
fc=10;
xc=cos(2*pi*fc*t); % Carrier wave
f=sin(2*pi*t); % Message Wave
figure(1)
subplot(3,1,1),plot(t,xc); % plotting all signal in Time
Domain
title('carrier signal ');
xlabel('time (sec)');
ylabel('amplitude');
subplot(3,1,2),plot(t,f);
title('message signal');
xlabel('time (sec)');
ylabel('amplitude');
% DSB-SC MODULATION
z1= f.*xc;
subplot(3,1,3),plot(t,z1);
title('DSB-SC MODULATION IN TIME DAOMAIN');
xlabel('time (sec)');
ylabel('amplitude');
l1=length(z1);
f=linspace(-fs/2,fs/2,l1); % Frequency Axis
Z=fftshift(fft(z1,l1)/l1); % Fourier transform of DSB-SC
X=fftshift(fft(f,l1)/l1); % Fourier transform of message
signal
figure(2)
subplot(2,1,1),plot(f,abs(X));
xlim([-10 10])
title('FOURIER TRANSFORM(SPECTRUM) OF s(t) BEFORE MODULATION
');
xlabel('frequency(hz)');
ylabel('amplitude');
subplot(2,1,2),plot(f,abs(Z)); % plotting Magnitude Spectrum
xlim([-10 10])
title('DSB SC MODULATION IN FREQUENCY DOMAIN');
xlabel('frequency(hz)');
ylabel('amplitude');
RESULTS:
If you have any doubt ,please ask me in comment section else rate my work.
An information signal is of the form s(t) = sin(2*pi*t)/t. The signal amplitude modulates a carrier...
The message signal m(t) = 2 cos 400t + 3 sin(800t + 22) modulates the carrier signal e(t) A cos(700π) using DSB-SC (dual side band, suppressed carrier) modulations Find the time domain and frequency domain representation of the modulated signal and plot the spectrum (Fourier transform) of the modulated signal. What is power content of the modulated signal?
2. (14 points) This problem shows an example of using the Fourier transform to analyze communication systems. The system in Figure 4, where (t)-f(t)+sin(wt) and has been proposed for amplitude modulation. f(t) + sin(o) Figure 4: System proposed for amplitude modulation. (a) (7 points) The spectrum of the input f(t) is shown in Figure 1, where 2mB o/100. Sketch and label the spectrum Y(w) of the signal y(t). Hint: You will need to use the frequency convolution property of the...
In a DSB-SC amplitude modulation system, the message signal is m(t)=e^(-3t)*u(t-2) and the carrier signal is ???( 2000??). Find the Fourier transform of the modulated signal.
Please solve whole this problem and be clear when you write by your hand. 2. An audio frequency signal 10sin2π500t) is used to amplitude modulate a carrier of 50sin(2π 100000t). Assume modulation index-02. Find: a) the general AM equation b) Sketch the spectrum resulting AM [S(] c) Sideband frequencies d) Amplitude of each sideband e) Bandwidth required f) Efficiency of AM wave 2. An audio frequency signal 10sin2π500t) is used to amplitude modulate a carrier of 50sin(2π 100000t). Assume modulation...
5. A message signal m(t) = cos(2000πt)+2 cos(4000πt) modulates the carrier c(t) = 100 cos(2πfct), where fc = 1 MHz to produce the DSB signal m(t)c(t). ( 1. Determine the expression for the upper-sideband (USB) signal. 2. Determine and sketch the spectrum of the USB signal.
The AM signal supplies 150w of carrier power when it is modulated by a single sine wave to a depth of 70%. Suppose the total transmitted power increases by 10% when another sine wave simultaneously amplitude modulates the carrier. Determine the modulation index of the second index.
A message m(t) sinc2 (M) cos (2π9t) is used to modulate a carrier to produce an LSB-AM signal. (a) Find and sketch the spectrum of m(t); determine and sketch the spectrum of mh (t) graphically; determine m,(t) by finding the inverse Fourier transform of the previous spectrum; determine the LSB-AM message signal expression. (b) Sketch the spectrum of the DSB-SC signal 2m(t) cos 2mfet; remove the upper sideband and sketch the resulting LSB spectrum; determine the LSB-AM message signal expression...
In a coherent detection process, a sinusoidally modulated DSB-SC wave, s(t) = c(t)m(t) where the carrier wave is c(t) =Accos(2πfct) and the message signal is m(t) = Amcos(2πfmt), is applied to a product modulator using a locally generated sinusoid of Ac’ amplitude and is out of phase by φ with respect to the sinusoidal carrier used in the modulation. (a) Draw the block diagram of the coherent detection process and label the block diagram with the information provided above accordingly....
4.(30p) A message signal is consisting of voice signal and information code as shown in the figure. This signal modulates an AM carrier signal x(t) defined as x(t) = cos(2 *T*50000*t) Find and sketch the spectrum of the modulated signal for each AM modulation type below. Explain the advantages and disadvantages of each modulation type. a) DSB-SC b) DSB c) SSB Upper Side Band AM(A) 2 a 1 2 -5 -4 -21 4 5 f (kHz)
Problem No. 1: Let us consider that a baseband message signal m(t)=4cos(2000xt) has to be transmitted from a location 'A' to its destination 'B' using a carrier signal given by c(t)=2cos(10000#t). The signal s() m(t)c(i) is the modulated signal which will be transmitted. Consider that the signal is transmitted through a noiseless channel and received at the receiver at location 'B' as the signal s(t). Based on this information, perform the following tasks. 1. Find, sketch and label the spectrum...