The molar absorptivity of a compound Z of molecular weight 250 is 2000. What weight in...
The molar absorptivity of a compound Z of molecular weight 250 is 2000. What weight in grams of a sample containing 1000 ppm of Z would have to be taken to obtain a transmittance of 50%, if the final volume of solution is 10 ml and the cell has a thickness of 10 mm
Homework Answers
Add Answer to:
The molar absorptivity of a compound Z of molecular weight 250
is 2000. What weight in...
the molar absorptivity of a compound Z of molecular weight 250 is 1000. What weight of...
the molar absorptivity of a compound Z of molecular weight 250 is 1000. What weight of a sample containing 3.5% of Z will have to be used to obtain the maximum precision in the photometric determination of Z if the final volume of the solution is of 10 ml and the cell is 10 mm thick?
C. Problems 1Explain the difference between transmittance, absorbance, and molar absorptivity Which one is proporti...
C. Problems 1Explain the difference between transmittance, absorbance, and molar absorptivity Which one is proportional to concentration? 2. The absorbance of a 2.3lx 10 M solution of a compound is 0.822 at a wavelength of 266 nm in a 1.00 cm cell. Calculate the molar absorptivity at 266 nm 3. A compound with a molecular weight of 292.16 was dissolved in a 5-ml volumetric flask. A 1.00-mLaliquat was withdrawn, placed in a 10-mL volumetric flask, and diluted to the mark....
A compound whose molecular weight is 100 g/mol, has a molar absorptivity of 1.00X10^5 M-1 cm-1....
A compound whose molecular weight is 100 g/mol, has a molar absorptivity of 1.00X10^5 M-1 cm-1. How many grams of this compound should be dissolved in exactly 1 liter of solution so that after diluting it 200 times the solution has an absorbance of 0.500 in a cell of 1.00 cm?
A compound has a molar absorptivity of 1.50 x 102 /(M• cm) . if 1.0 mL...
A compound has a molar absorptivity of 1.50 x 102 /(M• cm) . if 1.0 mL of a solution containing this compound is placed in 5.0 mL of water, this final solution produced and absorbance of 1.500. What is the concentration of this compound in the original solution? (cuvette = 1.0 cm)
Spectrochemical Analysis Methods
Given the molar absorptivity data for cobalt complex with 2,3-quinoxalinedithiol (QT) and QDT at 510 nm are:eCo = 36400 and egoT = 250 (at 510 nm)A 0.515 g sample was dissolved and diluted to 50.0 mL. A 20.0 mL aliquot was treated and QDT was added (with an excess QDT of 1x 10-4 M). The final volume was then adjusted to 50.0 mL. Thissolution has an absorbance of 0.371 at 510 nm in a 1.0 cm cell.Determine (a) the molar...
Molar absorptivity data for the cobalt and nickel complexes with 2,3-quinoxalinedithiol are = 364...
Molar absorptivity data for the cobalt and nickel complexes with 2,3-quinoxalinedithiol are = 36400 and = 5520 at 510 nm and = 1240 and = 17500 at 656 nm. A 0.389-g sample was dissolved and diluted to 50.0 mL. A 25.0-mL aliquot was treated to eliminate interferences; after addition of 2,3-quinoxalinedithiol, the volume was adjusted to 50.0 mL. This solution had an absorbance of 0.487 at 510 nm and 0.268 at 656 nm in a 1.00-cm cell. Calculate the concentration...
Molar absorptivity data for the cobalt and nickel complexes with 2,3-quinoxalinedithiol are = 36400 and =...
Molar absorptivity data for the cobalt and nickel complexes with 2,3-quinoxalinedithiol are = 36400 and = 5520 at 510 nm and = 1240 and = 17500 at 656 nm. A 0.389-g sample was dissolved and diluted to 50.0 mL. A 25.0-mL aliquot was treated to eliminate interferences; after addition of 2,3-quinoxalinedithiol, the volume was adjusted to 50.0 mL. This solution had an absorbance of 0.487 at 510 nm and 0.268 at 656 nm in a 1.00-cm cell. Calculate the concentration...
the molar absorptivity of the copper complex in chloroform at 436.0nm is 13,000 M-1 cm-1 which...
the molar absorptivity of the copper complex in chloroform at
436.0nm is 13,000 M-1 cm-1 which is useful
for the determination of Cu2+ concentrations as low as
10-6g/ml.
III. Interpretation of Results (a) Calibration curve Calculate the Cu2+ concentration of each standard solution in ug/mL (ug = 100 gram). Alternatively, ug/mL = ppm (part per million). Plot the net absorbance (= absorbance of standard - absorbance of blank) versus the concentration of each standard solution. sample volume 0 absorbance 0.061...
Question 2 Compound "Y" (molar mass = 480.5 g moll) used as a food coloring. Following...
Question 2 Compound "Y" (molar mass = 480.5 g moll) used as a food coloring. Following experiment was carried out to find the concentration of "Y" in a beverage. A stock solution of compound "Y" (concentration = 7.50 0 10-4 mol L-) was used to prepare a series of standard solutions. Calibrated pipets and 100.0 mL volumetric flasks were used for these preparations. Then, absorbance of these solutions were measured at 460 nm using 1-cm cuvettes. A dilution was carried...
You have an electrolyte, M3N, of which molecular weight is 600 g/mole. The compound is an...
You have an electrolyte, M3N, of which molecular weight is 600 g/mole. The compound is an electrolyte and dissociates as follows M3N = 3M++ N-3 What is the valency of the compound? If a solution contains the compound at a concentration of 50 mg/mL, how many miliequivalents(mEq) of the compound are in 500 mL? If a solution contains the compound at a concentration of 50 mg/mL, how many milliosmole(mOsmol)of the compound are in 1000 mL? If a solution contains M3N...
C. Problems 1Explain the difference between transmittance, absorbance, and molar absorptivity Which one is proportional to concentration? 2. The absorbance of a 2.3lx 10 M solution of a compound is 0.822 at a wavelength of 266 nm in a 1.00 cm cell. Calculate the molar absorptivity at 266 nm 3. A compound with a molecular weight of 292.16 was dissolved in a 5-ml volumetric flask. A 1.00-mLaliquat was withdrawn, placed in a 10-mL volumetric flask, and diluted to the mark....
the molar absorptivity of the copper complex in chloroform at
436.0nm is 13,000 M-1 cm-1 which is useful
for the determination of Cu2+ concentrations as low as
10-6g/ml.
III. Interpretation of Results (a) Calibration curve Calculate the Cu2+ concentration of each standard solution in ug/mL (ug = 100 gram). Alternatively, ug/mL = ppm (part per million). Plot the net absorbance (= absorbance of standard - absorbance of blank) versus the concentration of each standard solution. sample volume 0 absorbance 0.061...
Question 2 Compound "Y" (molar mass = 480.5 g moll) used as a food coloring. Following experiment was carried out to find the concentration of "Y" in a beverage. A stock solution of compound "Y" (concentration = 7.50 0 10-4 mol L-) was used to prepare a series of standard solutions. Calibrated pipets and 100.0 mL volumetric flasks were used for these preparations. Then, absorbance of these solutions were measured at 460 nm using 1-cm cuvettes. A dilution was carried...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago