A material processed to be a half an inch cable was able to withstand a load...
A material processed to be a half an inch cable was able to withstand a load of 50kg at its yield point, if it was originally 10cm long and finished with a length of 12.5cm, what is the Young´s modulus of elasticity of the cable?
Homework Answers
kindly give ratingAdd Answer to:
A material processed to be a half an inch cable was able to
withstand a load...
A steel cable is able to withstand a stress of 10.0×107 Pa up to its elastic...
A steel cable is able to withstand a stress of 10.0×107 Pa up to its elastic limit. If Young's modulus for steel is E = 4.0×1011 N/m2, what is the strain? What is elongation if the initial length is 3.0 meter?
A steel cable with a yield strength of 35 ksi is used to support a load...
A steel cable with a yield strength of 35 ksi is used to support a load of 10000 lb. Select the diameter of the cable using a factor of safety of 2.5. A standard steel specimen having a diameter of 0.502 in, and a gauge length of 2.00 in is used in a tension test. At 6000 lb the deformation is recorded as 0.00212 in. The load at the yield point is 7130 lb and the ultimate load is 11520...
MECHANICS OF ENGINEERING MATERIALS. FRACTURE TOUGHNESS. INTERNAL CRACKS 2. A 1 meter long metal bar with...
MECHANICS OF ENGINEERING MATERIALS. FRACTURE TOUGHNESS. INTERNAL
CRACKS
2. A 1 meter long metal bar with 40 mm diameter is to withstand an applied tensile load of 630,000 N along the longitudinal direction without yielding. It is also required that the total amount of deformation is not to exceed 2.6 mm. Select the suitable material(s) from the following table for this application and justify your selection(s). For materials that meet the above two requirements, calculate the maximum length of allowable...
Hello I am having trouble solving this problem. Please show all work. I know this is...
Hello I am having trouble solving this problem. Please show all
work. I know this is a long one so thank you ahead of time.
Selecting a suitable lifting mechanism for placing gasoline pipes underground is a vital step in 15000 psi 까 AntB -Point B pipeline construction projects. Segment #66 of the below pipeline is being lifted simultaneously Stress by two cranes with hook blocks, and each hook block weighs 800 lb. Segment #66 is 80 ft. long with...
Please answer all 7 parts lExaminatio The following information applies to questions 1 to 7 -below....
Please answer all 7 parts
lExaminatio The following information applies to questions 1 to 7 -below. You have a circular aluminum bar: 1 in diameter and 10" long. It is Type 2024-14 aluminum. It has the following properties: Tensile strength of: Yield Strength of: Modulus Of Elasticity of: Density of about: Coefficient of Thermal Expansion of: 12.9x10* in./in./ 68,000 #/square inch 47,000 #/square inch 10,600,000 #/square inch 0.1 lb/cubic inch 1) What are the 5 types of stress that you...
A 3 m rigid bar AB is supported with a vertical translational spring at A and a pin at B The bar is subjected to a linearly varying distributed load with maximum intensity g Calculate the ver...
A 3 m rigid bar AB is supported with a vertical translational spring at A and a pin at B The bar is subjected to a linearly varying distributed load with maximum intensity g Calculate the vertical deformation of the spring if the spring constant is 700 kN/m. (ans: 21.43 mm) 2. A steel cable with a nominal diameter of 25 mm is used in a construction yard to lift a bridge section weighing 38 kN. The cable has an...
Please give a full, detailed, worded explanation. Thank you :))) S. Draw a possible stress strain...
Please give a full, detailed, worded explanation. Thank you :)))
S. Draw a possible stress strain graph for a material with a yield stress of 300 MPa, an elastic modulus of 200 GPa, a UTS of 450 MPa and a ductility of 20%. Calculate the elastic strain at the point where the material starts to plastically deform. 6. A nylon rope with an elastic modulus of 3 GPa is placed under a force of 17.5 kN. The cross-sectional area of...
Part B Calculate the load II Review A square steel bar has a length of 2.2...
Part B Calculate the load II Review A square steel bar has a length of 2.2 ft and a 1.5 in by 1.5 in cross section and is subjected to axial compression. Under load, the thickness becomes 1.50032 in . If the modulus of elasticity is E = 2.9x 104 ksi and Poisson's ratio is v = 0.31; what is the magnitude of the load that was applied to the bar? Learning Goal To use Poisson's ratio and Hooke's law...
1- Capacitor B has half of the capacitor A. Compare the load of capacitor A with...
1- Capacitor B has half of the capacitor A. Compare the load of capacitor A with capacitor B charge when the two capacitors remain connected in series with a battery for a long time. 2- A capacitor immersed in the air has capacitance equal to 12.5 μF when the potential difference at its terminals is 24.0V. If we insert a constant material dielectric equal to 3.75 between the capacitor plates, filling the space between them completely, (a) how much energy...
Problem #1 A cylindrical rod of copper (E 110 GPa) having a yield strength of 240...
Problem #1 A cylindrical rod of copper (E 110 GPa) having a yield strength of 240 MPa is to be subjected to a load of 6660 N. If the length of the rod is 380 mm, what must the diameter be to allow an elongation of 0.50 mm? A cylindrical specimen of some alloy 8 mm in diameter is stressed elastically in tension. A force of 15,700 N produces a reduction in the specimen diameter of 5 10-3 mm. Compute...
A steel cable with a yield strength of 35 ksi is used to support a load of 10000 lb. Select the diameter of the cable using a factor of safety of 2.5. A standard steel specimen having a diameter of 0.502 in, and a gauge length of 2.00 in is used in a tension test. At 6000 lb the deformation is recorded as 0.00212 in. The load at the yield point is 7130 lb and the ultimate load is 11520...
MECHANICS OF ENGINEERING MATERIALS. FRACTURE TOUGHNESS. INTERNAL
CRACKS
2. A 1 meter long metal bar with 40 mm diameter is to withstand an applied tensile load of 630,000 N along the longitudinal direction without yielding. It is also required that the total amount of deformation is not to exceed 2.6 mm. Select the suitable material(s) from the following table for this application and justify your selection(s). For materials that meet the above two requirements, calculate the maximum length of allowable...
Hello I am having trouble solving this problem. Please show all
work. I know this is a long one so thank you ahead of time.
Selecting a suitable lifting mechanism for placing gasoline pipes underground is a vital step in 15000 psi 까 AntB -Point B pipeline construction projects. Segment #66 of the below pipeline is being lifted simultaneously Stress by two cranes with hook blocks, and each hook block weighs 800 lb. Segment #66 is 80 ft. long with...
Please answer all 7 parts
lExaminatio The following information applies to questions 1 to 7 -below. You have a circular aluminum bar: 1 in diameter and 10" long. It is Type 2024-14 aluminum. It has the following properties: Tensile strength of: Yield Strength of: Modulus Of Elasticity of: Density of about: Coefficient of Thermal Expansion of: 12.9x10* in./in./ 68,000 #/square inch 47,000 #/square inch 10,600,000 #/square inch 0.1 lb/cubic inch 1) What are the 5 types of stress that you...
A 3 m rigid bar AB is supported with a vertical translational spring at A and a pin at B The bar is subjected to a linearly varying distributed load with maximum intensity g Calculate the vertical deformation of the spring if the spring constant is 700 kN/m. (ans: 21.43 mm) 2. A steel cable with a nominal diameter of 25 mm is used in a construction yard to lift a bridge section weighing 38 kN. The cable has an...
Please give a full, detailed, worded explanation. Thank you :)))
S. Draw a possible stress strain graph for a material with a yield stress of 300 MPa, an elastic modulus of 200 GPa, a UTS of 450 MPa and a ductility of 20%. Calculate the elastic strain at the point where the material starts to plastically deform. 6. A nylon rope with an elastic modulus of 3 GPa is placed under a force of 17.5 kN. The cross-sectional area of...
Part B Calculate the load II Review A square steel bar has a length of 2.2 ft and a 1.5 in by 1.5 in cross section and is subjected to axial compression. Under load, the thickness becomes 1.50032 in . If the modulus of elasticity is E = 2.9x 104 ksi and Poisson's ratio is v = 0.31; what is the magnitude of the load that was applied to the bar? Learning Goal To use Poisson's ratio and Hooke's law...
Problem #1 A cylindrical rod of copper (E 110 GPa) having a yield strength of 240 MPa is to be subjected to a load of 6660 N. If the length of the rod is 380 mm, what must the diameter be to allow an elongation of 0.50 mm? A cylindrical specimen of some alloy 8 mm in diameter is stressed elastically in tension. A force of 15,700 N produces a reduction in the specimen diameter of 5 10-3 mm. Compute...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago