If the resistance of your galvanometer is R, and if it has full-scale deflection (FSD) at 1 mA, to create a voltmeter with FSD at 25 V, you need to connect the galvanometer in series with a resistor of resistance
+ R
- R
* R
/R
25
250
2500
25,000
250,000
25
250
2500
25,000
250,000
*Hello dear, the
way question is given, is not presented clearly. But I tried as I
could understand from the data given in Question.
#if you find this useful please thumbs up. In case, if you have any query regarding the solution please let me know in the comments section below. Thanks!!
If the resistance of your galvanometer is R, and if it has full-scale deflection (FSD) at...
The coil of wire in a galvanometer has a resistance of RC = 75.0 Ω. The galvanometer exhibits a full-scale deflection when the current through it is 0.200 mA. A resistor is connected in series with this combination so as to produce a voltmeter. The voltmeter is to have a full-scale deflection when it measures a potential difference of 14.0 V. What is the resistance of this resistor?
A galvanometer has a coil resistance of 100 ohms and gives a full scale deflection when the potential difference across it is 0.0005 V. What size resistor (with a value measured in ohms) is required to make a 5.0 A. full scale deflection ammeter?
Y ou have available a galvanometer that gives a full-scale deflection for a 333-μA current and has a coil resistance of 33 Ω. (a) What shunt resistance is needed to convert this galvanometer to a 5.0-A ammeter? (b) What series resistance is needed to convert this galvanometer to a 5.0-V voltmeter?
A galvanometer has a coil resistance of Rgalv = 13.9 ?. It is to be made into a voltmeter with a full-scale voltage equal to V = 325.0 V. If the galvanometer deflects full scale for a current of Igalv = 245.5 mA, what size additional resistor should be used?
A galvanometer has a coil resistance of ?galv=27.4 Ω . It is
to be made into a voltmeter with a full‑scale voltage equal to
?=225.0 V. If the galvanometer deflects full scale for a current of
?galv=255.5 mA, what size additional resistor should be used?
additional resistor size:
ople Window Help Jump to... ersity-PHYS 1010/1133-Winter19-MACKAY> Activities and Due Dates> D Assignment Score: s00/1700 Resources Hint Check Answer Question 14 of 17> eter has a coil resistance of R.-274 Ω. It...
A galvanometer of resistance 100 Ω gives full-scale deflection when its current is 1.0 mA. It is used to construct an ammeter whose full-scale reading is 100 A. If the shunt resistor consists of a piece of 10-gauge copper wire (diameter 2.59 mm), what should its length be
Chapter 20, Problem 088 Your answer is partially correct. Try again. The coil of wire in a galvanometer has a resistance of RC-52.5Ω. The galvanometer exhibits a full-scale deflection when the current through it is 0.325 mA. A resistor is connected in series with this combination so as to produce a voltmeter The voltmeter is to have a full-scale deflection when it measures a potential difference of 12.6 V. What is the resistance of this resistor? Number T12.58 UniiT
1. Given that a certain galvanometer has an internal resistance of 254 1 and can handle a maximum current of 250 HA, design an ammeter capable of reading at full- scale deflection (the maximum current without burning up the meter) 10 A and a voltmeter capable of reading at full-scale deflection 10 V. Assume that the space available in the meter for the shunt (for the ammeter) or limiting (for the voltmeter) resistor is no more than 5 mm in...
A galvanometer has an internal resistance of 100 ? and deflects full-scale at 2.00 mA. What size resistor should be added to the galvanometer to convert it to a milliammeter capable of reading up to 4.00 mA, and how should this resistor be connected to the galvanometer? Answer a. 75.0 ? in parallel with the galvanometer b. 50.0 ? in parallel with the galvanometer c. 50.0 ? in series with the galvanometer d. 100 ? in parallel with the galvanometer...
1. Given that a certain galvanometer has an internal resistance of 254 N and can handle a maximum current of 250 A, design an ammeter capable of reading at full- scale deflection (the maximum current without burning up the meter) 10 A and a voltmeter capable of reading at full-scale deflection 10 V. Assume that the space available in the meter for the shunt (for the ammeter) or limiting (for the voltmeter) resistor is no more than 5 mm in...