1,711 kg/hr of air flows through a counter-current heat exchanger. On the other side of the...
1,711 kg/hr of air flows through a counter-current heat exchanger. On the other side of the 250 kg/hr of milk flows through the heat exchanger from a pasteurization process at 80°C and requires cooling to 30°C for packaging and storage. What will be the temperature of air outlet in the exchanger if it enters at 18°C? Consider that the Cp of milk is 1.05 cal/(g °C).
Homework Answers
Cp
of milk is 1.05cal/g°c which is also equal to 4.39kj/kg°c.So I have
written directly 4.39kj/kg°c.
Thank you...
If you have any problems please ask in the comment box.
Please upvote If this is helpful .
Have a nice day!!
Add Answer to:
1,711 kg/hr of air flows through a counter-current heat
exchanger. On the other side of the...
Sulfur dioxide flows through a heat exchanger at 45 moles/hr. The inlet to the isobaric heat...
Sulfur dioxide flows through a heat exchanger at 45 moles/hr. The inlet to the isobaric heat exchanger is 100°C and 1bar and the heat rate is 1,300 kJ/hr. Assume an ideal gas with a Cp 0.05791T with T in K. mol K a. b. c. Determine the exit temperature for this heat exchanger. Determine the total rate change of entropy of the exit to inlet to the heat exchanger? Is the process of increasing SO2 temperature reversible? Prove with the...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
An engineer operates a counter-flow shell-and-tube heat exchanger. It is known that the A fluid (specific...
An engineer operates a counter-flow shell-and-tube heat exchanger. It is known that the A fluid (specific heat is 1.0 J/g*°C) flows into the outside of the tube at a mass flow rate of 100 g/hr. The inlet temperature is 90 ° C and the outlet temperature is At 70 ° C, the B fluid flows into the tube. The inlet temperature is 20 ° C and the outlet temperature is 65 ° C. If the heat transfer effective area is...
Determine the effectiveness of the concentric tube heat exchanger. The working fluid through the heat exchanger...
Determine the effectiveness of the concentric tube heat exchanger. The working fluid through the heat exchanger is water and is flowing at 1 m/min for both cold and hot pipes. The hot water temperature at the tube inlet is 90°C and the temperature at the tube outlet is 60°C. The cold water temperature at the tube inlet is 50°C and the temperature at the tube outlet is 80°C. Assume the density and the specific heat of water are 988.1 kg/m3...
2) Hot air enters a heat exchanger at 350°C and exits at 153°C. The heat extracted...
2) Hot air enters a heat exchanger at 350°C and exits at 153°C. The heat extracted is used to boil 0.277 kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m2). Assume a constant specific heat for air of cp = 1.005 kJ/(kg°C). The pressure of the hot air and the boiling water is P...
A concentric tube heat exchanger for cooling lubricating oil consists of a thin-walled inner tube of...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current flow. The pipes are 3 ft long. The inside pipe is a 5/8 inch BWG 12 copper tube. The outside pipe is a 1 inch Sch 40 steel pipe. The outside pipe is insulated to minimize heat loss to the surroundings. The hot water enters the inside tube at 180F with a flow rate such that Re = 10000 The cold water flows through...
Introduction Question 41-45 are based on the information provided here. Air enters a counter-flow heat exchanger...
Introduction Question 41-45 are based on the information provided here. Air enters a counter-flow heat exchanger at a rate of 5000 cubie feet per minute and at a temperature of 50°F and pressure of 14.7 psi. The air is heated by hot water flowing through the same heat exchanger at a rate of 11,200 Ib/sec with a decrease in the hot water temperature of 10°F. ÍC Air = 0.24 Btu/lbm-R, Cwaterー1.0 Btu/Ibm . R, Riir-53.35 ft-lbnom . R1 41. The...
Hot air enters a heat exchanger at 350°C and exits at (149°C. The heat extracted is...
Hot air enters a heat exchanger at 350°C and exits at (149°C. The heat extracted is used to boil (0.263) kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m2°C). Assume a constant specific heat for air of Cp = 1.005 kJ/(kgC). The pressure of the hot air and the boiling water is P =...
2) Hot air enters a heat exchanger at 350°C and exits at 155°C. The heat extracted...
2) Hot air enters a heat exchanger at 350°C and exits at 155°C. The heat extracted is used to boil 0.283 kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m²°C). Assume a constant specific heat for air of Cp = 1.005 kJ/(kg °C). The pressure of the hot air and the boiling water is...
Sulfur dioxide flows through a heat exchanger at 45 moles/hr. The inlet to the isobaric heat exchanger is 100°C and 1bar and the heat rate is 1,300 kJ/hr. Assume an ideal gas with a Cp 0.05791T with T in K. mol K a. b. c. Determine the exit temperature for this heat exchanger. Determine the total rate change of entropy of the exit to inlet to the heat exchanger? Is the process of increasing SO2 temperature reversible? Prove with the...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
Determine the effectiveness of the concentric tube heat exchanger. The working fluid through the heat exchanger is water and is flowing at 1 m/min for both cold and hot pipes. The hot water temperature at the tube inlet is 90°C and the temperature at the tube outlet is 60°C. The cold water temperature at the tube inlet is 50°C and the temperature at the tube outlet is 80°C. Assume the density and the specific heat of water are 988.1 kg/m3...
2) Hot air enters a heat exchanger at 350°C and exits at 153°C. The heat extracted is used to boil 0.277 kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m2). Assume a constant specific heat for air of cp = 1.005 kJ/(kg°C). The pressure of the hot air and the boiling water is P...
A concentric tube heat exchanger for cooling lubricating oil
consists of a thin-walled inner tube of 25 mm diameter carrying
water and an outer tube of 45 mm diameter carrying the oil. The
exchanger operates in countercurrent flow with an overall heat
transfer coefficient of 55 W/m2 K and the tabulated average
properties given below. Mass flow rates of oil and water are both
0.1 kg/s, oil enters the exchanger at 100°C, and water enters the
exchanger at 30°C. (a)...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current flow. The pipes are 3 ft long. The inside pipe is a 5/8 inch BWG 12 copper tube. The outside pipe is a 1 inch Sch 40 steel pipe. The outside pipe is insulated to minimize heat loss to the surroundings. The hot water enters the inside tube at 180F with a flow rate such that Re = 10000 The cold water flows through...
Introduction Question 41-45 are based on the information provided here. Air enters a counter-flow heat exchanger at a rate of 5000 cubie feet per minute and at a temperature of 50°F and pressure of 14.7 psi. The air is heated by hot water flowing through the same heat exchanger at a rate of 11,200 Ib/sec with a decrease in the hot water temperature of 10°F. ÍC Air = 0.24 Btu/lbm-R, Cwaterー1.0 Btu/Ibm . R, Riir-53.35 ft-lbnom . R1 41. The...
Hot air enters a heat exchanger at 350°C and exits at (149°C. The heat extracted is used to boil (0.263) kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m2°C). Assume a constant specific heat for air of Cp = 1.005 kJ/(kgC). The pressure of the hot air and the boiling water is P =...
2) Hot air enters a heat exchanger at 350°C and exits at 155°C. The heat extracted is used to boil 0.283 kg/s of 100°C water (from saturated liquid to saturated steam). The heat exchanger is a single-shell shell-and-tube heat exchanger with two tube passes. The overall heat transfer coefficient for the hot side is 240 W/(m²°C). Assume a constant specific heat for air of Cp = 1.005 kJ/(kg °C). The pressure of the hot air and the boiling water is...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago