Determine the transmitted bandwidth for each value of modulation index of three signals using a carrier signal of 17khz and a signal of sin(300*2pi)+sin(800*2pi)+sin(2000*2pi)+sin(4000*2pi)
Determine the transmitted bandwidth for each value of modulation index of three signals using a carrier...
In a DSB AM Determine the modulation index of four signals using a carrier signal of 17khz and a signal of .5sin(300*2pi)+sin(800*2pi)+.6sin(2000*2pi)+.4sin(4000*2pi)
Use MATLAB to plot the AM DSBSC modulated signals with modulation index m=0.25,0.5,0.8,1.0,1.2,1.5,2.0 with carrier signal c(t)=20cos(2pi20000t) and massage signal m(t)=Vm cos(2pi3000t) along with the envelope.
The AM signal supplies 150w of carrier power when it is modulated by a single sine wave to a depth of 70%. Suppose the total transmitted power increases by 10% when another sine wave simultaneously amplitude modulates the carrier. Determine the modulation index of the second index.
What is the bandwidth? (10 points) Twenty-four voice signals are to be multiplexed and transmitted over twisted pair. What is the bandwidth required (in bps) if synchronous time division multiplexing is used, if we use the standard analog to digital sampling rate, and if each sample is converted into an 8-bit value? (Suppose, each voice channel has a bandwidth of 4000 Hz).
below is used to modulate a carrier to generate the AM signal yt) (Am()) cos(1000t) The periodic signal m() shown a) The power efficiency of the system is measured to be 1 () The type of AM modulation, i.e. SSB, DSBSC, (i) The constant A. (ili) The modulation index 1/13. Determine DSB with carrier enit -3 b) An angle modulated signal is given by d(t-2 cos (2n1061+ sin 2 1000). Find i) The carrier frequency. ii) The baseband signal bandwidth....
Twelve different message signals, each with a bandwidth of 10 kHz, will be multiplexed and transmitted. Determine the minimum bandwidth required for each of the following methods: a-) FDM b) SSB C) TDM D) PAM
1
2
4. The amplitude modulation signal is given by the following expression and is applied to 75 load. Vam(t) = 10 sin (21fct) - 2.5 cos (1500krt) + 2.5 cos (1450krt) V Determine: a) Modulation index b) The frequency of the carrier and the information signal c) The bandwidth d) The total power e) The transmission power efficiency be ar e 5. One of the inputs to a frequency modulator is a 250 kHz carrier signal with amplitude of...
2. The different types of modulation schemes have different distance between the transmitted signals. The distance for BPSK, QPSK, M-PSK, BFSK, and M-FSK is shown below. Modulation Scheme Minimum Distance between Constellation Points Bandwidth BPSK d=2./PT= 2/E B = 2f = 21 QPSK d=2/PTo = 2/E B = 2/3 = fo M-PSK d = 54€, sin? ) = 4.NE, sin? (75) B = 2f: = 2 16-QAM d = 2/0.4E BFSK d= 2E (Orthogonal BFSK) B = 45 M-FSK d...
1. (15) By the Sampling Theorem the Nyquist sampling rate must be twice the highest bandwidth of the message signal. For the three message signals below determine the Nyquist rate and the Nyquist interval for each. a) m(t) = 0.5 cos(150 ) + sin(300Ft) + 0.75 cos(350ft) b) m(t) = 2 cos(120rt) sin(3007) c) m(t) = sinc(4000) = sin(400m) Recall: the Fourier transform of a sinc waveform is a rectangular pulse
Data communication Qs
A signal has a bandwidth frequency of 150 Hz and the highest frequency is 170 Hz. What is the lowest frequency of the signal? (just put the whole number. No decimal values. No units next to the number) A periodic signal completes one cycle in 0.04 second. What is the frequency? A sine wave completes 7200 cycles in one hour. What are its frequency and period? I: 50 Hz, II: 10 Hz, 0.1 seconds I: 25 Hz,...