A student measured an AC current of 0.152 Amps using a Fluke 8000A meter. Calculate the meter uncertainty of the current measurement in Amps.
For ac current Fluke 8000A multimeter in 10A current range and 45Hz to 3 kHz frequency range has accuracy of +1% to -1% . So here meter uncertainity will be 0.00152 Amps.
A student measured an AC current of 0.152 Amps using a Fluke 8000A meter. Calculate the...
2) Another student measured the period of a simple pendulum using a stopwatch. However, instead of measuring a single period, he waited for 10 periods to elapse before stopping the stopwatch. He obtained the time t = 19.40 s for ten oscillations. Report the period and its uncertainty in an appropriate format (assuming that the absolute uncertainty in the time measurement is still the same, i.e. 8t = 0.2 s). Calculate the fractional uncertainty in the period measurement.
A wire of length 1.0 meter carries a current of 10 amps and makes an angle of 30 degree with a uniform magnetic field of magnitude B = 1.5 T. Calculate the magnitude and direction of the force on the wire.
4. (5 points) Three students make measurements of the length of a 1.50 meter rod. Each student reports an uncertainty estimate representing an independent random error applicable to the measurement Alice A single measurement using a 2.0 meter long tape measure, to within +2 mm. Bob: Two measurements using a wooden meter stick, each to within t2 mm, which he adds together Christina: Two measurements using a machinist's meter ruler, each to within + mm, which she adds together. The...
A student prepared a 0.10M solution of formic acid (HCHO2) and measured its pH using a pH meter. The pH at 25C was found to be 2.38. Calculate Ka for formic acid at this temperature.
An AC source with a maximum EMF of 11.1 volts and maximum current of 2.4 amps is connected to the primary side of a transformer. The primary side of the transformer is wrapped 18 times and the secondary side is wrapped 34 times. What is the maximum power of the secondary side of the transformer in Watts?
A student provides a current of 8.000 amps through a solution of Co3+ (aq). The voltage is such that cobalt metal is deposited at the cathode. How long must the current be applied to plate 50.00 grams of Co(s)?
Nature and Nurture... Question 12 1 pts If 0.5 amps of current are measured in a circuit with a light bulb connected to 120 volts outlet, what is the resistance of the filament in the light bulbs 0 240 watts O 60 watts O 240 ohms 0 60 ohms 1 pts
The current through a 58 mH inductor is measured 1.6 amps. How much energy is stored in millijoules? Question 15 10 pt One 3 mH and one 8 mH inductor are connected in series. What is the equivalent inductance (in mH)?
Experiment # 8-Prelab Measurement of Single Phase AC Power by Wattmeter 8.1.The measured current in Figure 8.3 is 10 A and the measured power is 900 W. Consider that the wattmeter is ideal (doesn't change the voltage and current through the load) and determine: a) The resistance of the motor coil (R); b) The inductance of the motor coil (L); c) The power factor of the motor coil (cosp) d) The complex power (S); e) The reactive power (Q): f...
Question 12 1 pts If 0.5 amps of current are measured in a circuit with a light bulb connected to a 120 volts outlet, what is the resistance of the filament in the light bulb? See O 240 watts O 60 watts 0 240 ohms 0 60 ohms 1 pts Question 13 1 pts What is the power of the bulb in the problem above.Sep O 60 watts 0 240 watts O 240 ohms 60 ohms 1 pts