• A reservoir has 500 Af from the takepoint down to the oil water contact, porosity of 28%, Swi of 25%. Calculate the original oil in place. Use Boi = 1.25 RB/STB ( reservoir barrels/stock tank barrel) •
Calculate water-drive recovery to calculate reserves. •
Assume J=1.5 BOPD/psi and a drawdown of 400 psi to calculate the initial rate •
Calculate the rate on each anniversary of initial production (assume 1/1/20) down to 50 BOPD. •
Remember now we know ∆Np, equal to reserves. We will calculate the initial rate, and the final rate is 50 BOPD. All that is unknown is “a”.
• Would this be proved reserves?

if you have any doubts pls comments below , i will be there to help you , don't forget to rate its help me alot, please dont give the down rating it will be effects me if you have any doubt i will definitely clarify.
thank you ... !!
• A reservoir has 500 Af from the takepoint down to the oil water contact, porosity...
Volumetric Reserves Estimation The Stock-tank Oil Initially in Place (STOTIP) is the amount of oil that is stored in an oil reservoir. Assuming that the pore spaces in the reservoir are filled with water and oil only, the STOTIP can be estimated using the formula: STOLIP = 7758Ah (1 - S..)/B where A is the area of the reservoir in acres, h is the reservoir thickness in feet (ft). s is the initial water saturation of the reservoir. It is...
A gas reservoir has average porosity of 18.2% in an area of 4830 acres with a net thickness of 120 ft, water saturation of 16.6%. The gas recovery factor after 30 years is 0.42 and initial gas formation volume factoris 01L RB/SCE Calculate the recoverable gas after 20 years in BCE the answer to the nearest whole number and write the answer sngt roundup format ie. 123
A. 2 pts. Consider a small hydroelectric power station that generates 1000 kW of electrical power. Water passes through the turbine as it falls from the reservoir level down a vertical drop of 25.0 m to the river below the dam. Assuming 80.0% conversion efficiency, what volume of water must pass through the turbine each second? (give answer in m') p= density of water 1000 kg/m3 g=9.81 ms-2 B. 2 pts. Determine the total energy content of all the natural...