Summarize a procedure that will allow you to accurately prepare a series of solutions that are...
Summarize a procedure that will allow you to accurately prepare a series of solutions that are the following molar concentration: 0.1, 0.05, 0.025, 0.0125, and 0.00625 from a 0.2 M stock using a certain number of drops of water. Show the calculations for only the most concentrated dilution.
Homework Answers
You have the initial solution with a concentration of 0.1 M, then the dilutions are made:
A part of 0.1 M solution is taken and the same amount of water is added to obtain 0.05 M solution.
A part of 0.05 M solution is taken and the same amount of water is added to obtain 0.025 M solution.
The same procedure is performed twice more and the series of solutions at different concentrations is available.
If you liked the answer, please rate it in a positive way, you would help me a lot, thank you.
Add Answer to:
Summarize a procedure that will allow you to accurately prepare
a series of solutions that are...
Describe exactly how to prepare a series of 8 solutions of a reagent with dilution factor...
Describe exactly how to prepare a series of 8 solutions of a reagent with dilution factor of 2 within the series and the most concentrated solution with concentration of c1 = 50.0 mM. The stock solution has the concentration of 1.00M. Find the concentrations of all 8 solutions in the series, and the volumes of water and a more concentrated solution (use any numbers) to prepare each of the solutions in the series.
Describe exactly how to prepare a series of 8 solutions of a reagent with dilution factor...
Describe exactly how to prepare a series of 8 solutions of a reagent with dilution factor of 2 within the series and the most concentrated solution with concentration of c1 = 50.0 mM. The stock solution has the concentration of 1.00M. Find the concentrations of all 8 solutions in the series, and the volumes of water and a more concentrated solution (indicate which you intend to use) to prepare each of the solutions in the series.
c. Complete the table to summarize your results for the preparation of copper(II) sulfate solutions. volume...
c. Complete the table to summarize your results for the preparation of copper(II) sulfate solutions. volume of the Concentrated Solution (mL) Volume of Water (ml) Table 12-3. Preparation of copper (II) sulfate solutions. Amount of Volume of the Concentration (M) CuSO. 5H,0 Final Solution la (ml) 0.50 2.4961 0.20 20 0.10 0.05 20 20 12 10 10 5. Show the measured values of %T for each of the made Cu2+ solutions along with the corresponding absorbance for each. Table 12-4....
Questions 1. Consider the calibration graph and the absorption spectrum for solutions of metal ion, M...
Questions 1. Consider the calibration graph and the absorption spectrum for solutions of metal ion, M * Absorption Spectrum for M Calibration Curve for M 0.8 0.7 1.2 0.6 1 0.5 S 0.8 0.4 0.6 0.3 0.4 0.2 0.1 0.2 0- 0 0.5 0.4 0.3 0.2 0.1 400 450 500 550 600 650 700 [M*1 (Molar) (入) nm a) At what wavelength was the calibration curve obtained? Explain your answer. b) Use the calibration curve to calculate the concentration (M)...
3. Experimental Procedure, Part A.1. For preparing a set of standard solutions of FeNCS, the equilibrium...
3. Experimental Procedure, Part A.1. For preparing a set of standard solutions of FeNCS, the equilibrium molar con- centration of FeNCS is assumed to equal the initial molar concentration of the SCN in the reaction mixture. Why is this assumption valid? A. A Set of Standard Solutions to Establish a The set of standard solutions is used to determine the absorbance of known molar con- centrations of FeNCS2. A plot of the data, known as a calibration curve, is used...
You will prepare two of the buffer solutions used in this lab. They are the 0.1...
You will prepare two of the buffer solutions used in this lab. They are the 0.1 M CHaCOOH/CH3COONa buffer at pH- 4.74 and at pH-6. You will need to write your own procedure for the preparation of these buffers. To write the procedure, study the manual and follow the pre-lab questions. Using Henderson-Hasselbach equation to calculate the ratio of [CH,COONa/[CH COOH] for each buffer and write your answers in the table on the right. Show calculations: 1. 2. You just...
Please show work and accurate significant figures. Thank you. 4. A student prepared had a concentration...
Please show work and accurate significant figures.
Thank you.
4. A student prepared had a concentration of 15 drops/L. The procedure. Calculation the concentrations of solu solution, complete with equations, units, and the correct number of 518 Pay attention to units! olutions using the serial dilution method. The stock solution ation of 15 drops/L. The solutions were prepared according the following alculation the concentrations of solutions A-D. Show the calculation for each ns, units, and the correct number of significant...
The Absorbance for the highest concentration of starch is lower than you might have expected. What...
The Absorbance for the highest concentration of starch is lower than you might have expected. What is the most likely reason for this? The sample was prepared incorrectly and actually has a lower starch concentration than indicated. Not enough Lugols was added, and not all of the starch is being detected. The measurement was made inaccurately, and the Absorbance is probably higher than indicated. Spectrophotometer readings are inaccurate near their maximum value of 2. You have series of starch solutions...
Font Paragraph 2. You are provided 50.0 mL of the 0.200M CoCl2 stock solution. With this...
Font Paragraph 2. You are provided 50.0 mL of the 0.200M CoCl2 stock solution. With this stock solution prepare 5 dilutions to produce a series of known concentration solutions. Show all dilution calculations below. Type or draw the equations and solution concentrations. (10) 3. Utilizing the data below to calculate the absorbances of your dilutions from part 2. Known Concentration % Transmittance 0.20 0 0.18 13 0.16 16 0.14 20.1 0.12 26 4. Type your concentrations into the data table...
3. In Part A, you measure the absorbance of four FesCN" solutions and prepare a plot...
3. In Part A, you measure the absorbance of four FesCN" solutions and prepare a plot (Absorbance vs. concentration) similar to the one below. Beer's Law Plot for FeSCN2 0.6 0.5 0.4 0.3 d 0.2 0.1 0 y = 2417.5× + 0.0483 R2 0.99897 0.00025 0.00015 0.0002 0.00005 0.0001 0 Concentration (M) You use this plot as a standard curve in Part B to determine the concentration of an unknown. If an unknown FeSCN2 solution gives an absorbance reading of...
c. Complete the table to summarize your results for the preparation of copper(II) sulfate solutions. volume of the Concentrated Solution (mL) Volume of Water (ml) Table 12-3. Preparation of copper (II) sulfate solutions. Amount of Volume of the Concentration (M) CuSO. 5H,0 Final Solution la (ml) 0.50 2.4961 0.20 20 0.10 0.05 20 20 12 10 10 5. Show the measured values of %T for each of the made Cu2+ solutions along with the corresponding absorbance for each. Table 12-4....
Questions 1. Consider the calibration graph and the absorption spectrum for solutions of metal ion, M * Absorption Spectrum for M Calibration Curve for M 0.8 0.7 1.2 0.6 1 0.5 S 0.8 0.4 0.6 0.3 0.4 0.2 0.1 0.2 0- 0 0.5 0.4 0.3 0.2 0.1 400 450 500 550 600 650 700 [M*1 (Molar) (入) nm a) At what wavelength was the calibration curve obtained? Explain your answer. b) Use the calibration curve to calculate the concentration (M)...
3. Experimental Procedure, Part A.1. For preparing a set of standard solutions of FeNCS, the equilibrium molar con- centration of FeNCS is assumed to equal the initial molar concentration of the SCN in the reaction mixture. Why is this assumption valid? A. A Set of Standard Solutions to Establish a The set of standard solutions is used to determine the absorbance of known molar con- centrations of FeNCS2. A plot of the data, known as a calibration curve, is used...
You will prepare two of the buffer solutions used in this lab. They are the 0.1 M CHaCOOH/CH3COONa buffer at pH- 4.74 and at pH-6. You will need to write your own procedure for the preparation of these buffers. To write the procedure, study the manual and follow the pre-lab questions. Using Henderson-Hasselbach equation to calculate the ratio of [CH,COONa/[CH COOH] for each buffer and write your answers in the table on the right. Show calculations: 1. 2. You just...
Please show work and accurate significant figures.
Thank you.
4. A student prepared had a concentration of 15 drops/L. The procedure. Calculation the concentrations of solu solution, complete with equations, units, and the correct number of 518 Pay attention to units! olutions using the serial dilution method. The stock solution ation of 15 drops/L. The solutions were prepared according the following alculation the concentrations of solutions A-D. Show the calculation for each ns, units, and the correct number of significant...
The Absorbance for the highest concentration of starch is lower than you might have expected. What is the most likely reason for this? The sample was prepared incorrectly and actually has a lower starch concentration than indicated. Not enough Lugols was added, and not all of the starch is being detected. The measurement was made inaccurately, and the Absorbance is probably higher than indicated. Spectrophotometer readings are inaccurate near their maximum value of 2. You have series of starch solutions...
Font Paragraph 2. You are provided 50.0 mL of the 0.200M CoCl2 stock solution. With this stock solution prepare 5 dilutions to produce a series of known concentration solutions. Show all dilution calculations below. Type or draw the equations and solution concentrations. (10) 3. Utilizing the data below to calculate the absorbances of your dilutions from part 2. Known Concentration % Transmittance 0.20 0 0.18 13 0.16 16 0.14 20.1 0.12 26 4. Type your concentrations into the data table...
3. In Part A, you measure the absorbance of four FesCN" solutions and prepare a plot (Absorbance vs. concentration) similar to the one below. Beer's Law Plot for FeSCN2 0.6 0.5 0.4 0.3 d 0.2 0.1 0 y = 2417.5× + 0.0483 R2 0.99897 0.00025 0.00015 0.0002 0.00005 0.0001 0 Concentration (M) You use this plot as a standard curve in Part B to determine the concentration of an unknown. If an unknown FeSCN2 solution gives an absorbance reading of...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago