A test bar of a metal with 12.83 mm in diameter and 50 mm gage length...
A test bar of a metal with 12.83 mm in diameter and 50 mm gage length is loaded elastically with 156 kN tensile load and is stretched by 0.356 mm. Its diameter is 12.80 mm under load. What is the elastic modulus of the metal?
Homework Answers
Add Answer to:
A test bar of a metal with 12.83 mm in diameter and 50 mm gage
length...
A test bar 12.8 mm in diameter and 50 mm initial length is loaded elastically with...
A test bar 12.8 mm in diameter and 50 mm initial length is loaded elastically with 16000 kgf and is elongated 0.36 mm. Its diameter is 12.78 mm under load. Calculate, the modulus of elasticity and Poisson’s ratio of the material.
A tensile test specimen has a gage length = 50 mm and diameter = 20 mm....
A tensile test specimen has a gage length = 50 mm and diameter = 20 mm. Yielding occurs at a load of 137900. The corresponding gage length = 51 mm, which is the 0.2 percent yield point. The maximum load of 258100 N is reached at a gage length = 62.8 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength.
A bar of metal (length L =200 mm, diameter d=10 mm) is loaded axially by a...
A bar of metal (length L =200 mm, diameter d=10 mm) is loaded axially by a tensile force P = 12 kN. If the bar elongates by 0.3 mm, what is the decrease in diameter d? What is the value of modulus of elasticity? Consider, v=0.30.
A tensile test uses a test specimen that has a gage length of 50 mm and...
A tensile test uses a test specimen that has a gage length of 50 mm and an area = 217 mm2. During the test, the specimen yields under a load of 98,068 N. The corresponding gage length = 50.32 mm - this is at the 0.2 percent yield point. The maximum load of 165,736 N is reached at a gage length = 63 mm. If fracture occurs at a gage length of 67 mm, determine the yield strength in MPa.
A cylindrical bar of metal having a diameter of 19.0 mm and a length of 207...
A cylindrical bar of metal having a diameter of 19.0 mm and a length of 207 mm is deformed elastically in tension with a force of 53700 N. Given that the elastic modulus and Poisson's ratio of the metal are 67.6 GPa and 0.34, respectively, determine the following: (a) The amount by which this specimen will elongate in the direction of the applied stress.
A cylindrical bar of metal having a diameter of 16.5 mm and a length of 183...
A cylindrical bar of metal having a diameter of 16.5 mm and a length of 183 mm is deformed elastically in tension with a force of 42000 N. Given that the elastic modulus and Poisson's ratio of the metal are 67.1 GPa and 0.34, respectively, determine the following:(a) The amount by which this specimen will elongate (in mm) in the direction of the applied stress. (b) The change in diameter of the specimen (in mm). Indicate an increase in diameter...
A square metal bar of length 1.25 m and 50 mm on each side is subjected...
A square metal bar of length 1.25 m and 50 mm on each side is subjected to a tensile axial tensile force of 100,000 kN. Assume that E=80 GPa and v= 0.30. What is the width of the bar when under load (answer in millimeters)?
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length...
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length = 50 mm and its cross-sectional area = 100 mm. The specimen yields at 48,000 N, and the corresponding gage length - 50.23 mm. This is the 0.2 ent yield point. The maximum load of 87,000 N is reached at a gage length 64.2 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength. (d) If fracture occurs at a gage...
A cylindrical bar of metal having a diameter of (4.726x10^0) mm and a length of (6.0264x10^2)...
A cylindrical bar of metal having a diameter of (4.726x10^0) mm and a length of (6.0264x10^2) mm is deformed elastically in tension with a force of (1.16x10^4) N. Given that the elastic modulus and Poisson's ratio of the metal are (1.3007x10^2) GPa and (3.3600x10^-1) , respectively, determine the change in diameter of the specimen (in mm). Indicate an increase in diameter with a positive number and a decrease with a negative number. As always use scientific notation in the form...
(b). A cylindrical aluminum rod has a diameter of do 25 mm and a gage length...
(b). A cylindrical aluminum rod has a diameter of do 25 mm and a gage length of Lo 250 mm. If a load of 165 kN elongates the gage length 1.20 mm, i, determine the modulus of elasticity E. ii. under what conditions is the equation you use to solve the problem valid?
A bar of metal (length L =200 mm, diameter d=10 mm) is loaded axially by a tensile force P = 12 kN. If the bar elongates by 0.3 mm, what is the decrease in diameter d? What is the value of modulus of elasticity? Consider, v=0.30.
A square metal bar of length 1.25 m and 50 mm on each side is subjected to a tensile axial tensile force of 100,000 kN. Assume that E=80 GPa and v= 0.30. What is the width of the bar when under load (answer in millimeters)?
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length = 50 mm and its cross-sectional area = 100 mm. The specimen yields at 48,000 N, and the corresponding gage length - 50.23 mm. This is the 0.2 ent yield point. The maximum load of 87,000 N is reached at a gage length 64.2 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength. (d) If fracture occurs at a gage...
(b). A cylindrical aluminum rod has a diameter of do 25 mm and a gage length of Lo 250 mm. If a load of 165 kN elongates the gage length 1.20 mm, i, determine the modulus of elasticity E. ii. under what conditions is the equation you use to solve the problem valid?
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago