Homework Answers
please like sir
Add Answer to:
A pressurized tank of water has a 9-cm-diameter orifice at the bottom, where water discharges to...
Can I know full answer 2. Pressurized tank of water has a 10-cm-diameter orifice at the...
Can I know full answer
2. Pressurized tank of water has a 10-cm-diameter orifice at the bottom, where water discharges to the atmosphere. The water level is 3 m above the outlet. The tank air pressure above the water level is 300 kPa (absolute) while the atmospheric pressure is 100 kPa. Neglecting frictional effects, determine the initial discharge rate of water from the tank. Air 00 kPa 3 m 10 cm
Air 250 kPa Problem6 A tall tank has an orifice (circular opening) located 2.5 m below...
Air 250 kPa Problem6 A tall tank has an orifice (circular opening) located 2.5 m below the water surface. The tank is closed with an ABSOLUTE pressure of 250 kPa. Atmospheric pressure is 100 kPa. (a) Neglecting frictional effects, determine the flowrate out of the tank. (b) As the tank empties, will the flowrate increase, decrease, or remain the same? Prove your answer with equations and words. Assume the air pressure in the tank remains constant. 2.5 m 10 cm
Question 8 At the bottom of a pressurized petroleum tank there is a 10 cm diameter...
Question 8
At the bottom of a pressurized petroleum tank there is a 10 cm
diameter hole through which petroleum is poured into the
atmosphere. Water level is 2.5m higher than the hole.
(Friction losses will be neglected.)
1)Calculate the initial flow of water discharged from the
tank.
2)What is the height of the petroleum after 10 seconds?
Density of petroleum = 850 kg/m3
Base diameter = 70 cm
Atmospheric pressure = 101325 Pa
Air pressure on the water surface...
A pressurized water tank contains water with a mass density of 62.1 lbm/ft3. The water depth...
A pressurized water tank contains water with a mass density of 62.1 lbm/ft3. The water depth is 10 feet (above ground level) and the tank is pressurized to 28 psia. The tank outlet at ground level is a 4 inch diameter pipe with a closed valve. Atmospheric pressure is at 14.5 psia. If the valve on the 4 inch pipe is opened all the way what will be the initial water flow rate out of the pipe in ft3/s?
A 3-m-diameter tank is initially filled with water 2 m above the center of a sharp-edged 10-cm-diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the at...
A 3-m-diameter tank is initially filled with water 2 m above the center of a sharp-edged 10-cm-diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the atmosphere through a 100-m-long pipe. The friction coefficient of the pipe is taken to be 0.015 and the effect of the kinetic energy correction factor can be neglected. In order to drain the tank faster, a pump is installed near the tank exit. Water tank Pump Required...
Water is siphoned from a large tank and discharges into the atmosphere through a 2-in.-diameter tube...
Water is siphoned from a large tank and discharges into the
atmosphere through a 2-in.-diameter tube as shown in the figure
below. The end of the tube is 3 ft below the tank bottom, and
viscous effects are negligible. Determine the volume flowrate from
the tank. Determine the maximum height, H, over which the water can
be siphoned without cavitation occurring. Atmospheric pressure is
14.7 psia, and the water vapor pressure is 0.26 psia
You are assigned the design of a cylindrical, pressurized water tank for a future colony on...
You are assigned the design of a cylindrical, pressurized water tank for a future colony on Mars, where the acceleration due to gravity is 3.71 m/s2. The pressure at the surface of the water will be 150 kPa , and the depth of the water will be 14.1 m . The pressure of the air outside the tank, which is elevated above the ground, will be 91.0 kPa . Find the net downward force on the tank's flat bottom, of...
You are assigned the design of a cylindrical, pressurized water tank for a future colony on...
You are assigned the design of a cylindrical, pressurized water tank for a future colony on Mars, where the acceleration due to gravity is 3.71 m/s2. The pressure at the surface of the water will be 145 kPa , and the depth of the water will be 14.4 m . The pressure of the air outside the tank, which is elevated above the ground, will be 95.0 kPa . A) Find the net downward force on the tank's flat bottom,...
You are assigned the design of a cylindrical, pressurized water tank for a future colony on...
You are assigned the design of a cylindrical, pressurized water tank for a future colony on Mars, where the acceleration due to gravity is 3.71 m/s2. The pressure at the surface of the water will be 105 kPa , and the depth of the water will be 13.5 m . The pressure of the air outside the tank, which is elevated above the ground, will be 87.0 kPa . Find the net downward force on the tank's flat bottom, of...
7.24 A pump is used to pressurize air in a tank to 300 kPa abs. e tank has a diameter of 2 m and a height of 4 m. Th...
7.24 A pump is used to pressurize air in a tank to 300 kPa abs. e tank has a diameter of 2 m and a height of 4 m. The initial level of water in the tank is 1 m, and the initial pressure at the tank water surface is 0 kPa gage. The atmospheric pressure is 100 kPa. The pump provides a constant head of 50 m. The water is drawn from a reservoir that is 4 m below...
Can I know full answer
2. Pressurized tank of water has a 10-cm-diameter orifice at the bottom, where water discharges to the atmosphere. The water level is 3 m above the outlet. The tank air pressure above the water level is 300 kPa (absolute) while the atmospheric pressure is 100 kPa. Neglecting frictional effects, determine the initial discharge rate of water from the tank. Air 00 kPa 3 m 10 cm
Air 250 kPa Problem6 A tall tank has an orifice (circular opening) located 2.5 m below the water surface. The tank is closed with an ABSOLUTE pressure of 250 kPa. Atmospheric pressure is 100 kPa. (a) Neglecting frictional effects, determine the flowrate out of the tank. (b) As the tank empties, will the flowrate increase, decrease, or remain the same? Prove your answer with equations and words. Assume the air pressure in the tank remains constant. 2.5 m 10 cm
Question 8
At the bottom of a pressurized petroleum tank there is a 10 cm
diameter hole through which petroleum is poured into the
atmosphere. Water level is 2.5m higher than the hole.
(Friction losses will be neglected.)
1)Calculate the initial flow of water discharged from the
tank.
2)What is the height of the petroleum after 10 seconds?
Density of petroleum = 850 kg/m3
Base diameter = 70 cm
Atmospheric pressure = 101325 Pa
Air pressure on the water surface...
A 3-m-diameter tank is initially filled with water 2 m above the center of a sharp-edged 10-cm-diameter orifice. The tank water surface is open to the atmosphere, and the orifice drains to the atmosphere through a 100-m-long pipe. The friction coefficient of the pipe is taken to be 0.015 and the effect of the kinetic energy correction factor can be neglected. In order to drain the tank faster, a pump is installed near the tank exit. Water tank Pump Required...
Water is siphoned from a large tank and discharges into the
atmosphere through a 2-in.-diameter tube as shown in the figure
below. The end of the tube is 3 ft below the tank bottom, and
viscous effects are negligible. Determine the volume flowrate from
the tank. Determine the maximum height, H, over which the water can
be siphoned without cavitation occurring. Atmospheric pressure is
14.7 psia, and the water vapor pressure is 0.26 psia
7.24 A pump is used to pressurize air in a tank to 300 kPa abs. e tank has a diameter of 2 m and a height of 4 m. The initial level of water in the tank is 1 m, and the initial pressure at the tank water surface is 0 kPa gage. The atmospheric pressure is 100 kPa. The pump provides a constant head of 50 m. The water is drawn from a reservoir that is 4 m below...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago