Question 9: D
After the isenthalpic process in expansion valve, it centers as a saturated mixture in the evaporator.
Question 10: D
During the intake stroke air is being sucked in by pushing piston down creating negative pressure.
Question 11: B
Reciprocating compressors consists of piston cylinder arrangement used for compression of fluid.
Question 12: D
Piping material should be inert to prevent decomposition of refrigerant and better heat heat transfer.
Question 9 The phase of the refrigerant at the inlet of the evaporator in an ideal...
In a vapor-compression refrigeration cycle, ammonia exits the
evaporator as saturated vapor at -22 °C. There are
irreversibilities in the compressor. The refrigerant enters the
condenser at 16 bar and 160 °C, and saturated liquid exits at 16
bar. There is no significant heat transfer between the compressor
and its surroundings, and the refrigerant passes through the
evaporator with a negligible change in pressure.
Calculate the coefficient of performance, b, and the isentropic
compressor efficiency, defined as:
2s Condenser Expansion...
1. It is a component of a refrigeration system that has high thermal conductivity and interests with the refrigerant 2. The phase of the refrigerant at the inlet of the evaporator in an ideal Vapor compression refrigeration cycle is? 3. It is the type of stroke in an otto cycle where the piston is being pushed downward 4. This is a type of compressor which uses the piston motion for compression
Question 5 2 Points It is the type of stroke in an Otto cycle where fuel vapor and air are ignited A Exhaust B Compression C Intake D Combustion Question 6 2 Points Which of these refrigerant is not grouped as inorganic? A Ammonia B) Iso-Butane c) Water D Carbon Dioxide Question 7 2 Points Among these refrigerants, which has the highest Ozone Depletion Potential? A Ammonia BR-22 C) R-134a D R-11 Question 8 2 points The phase of the...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant enters the condenser at 16 bar and 160°C, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 150 kW, determine: (a) the mass flow rate of the refrigerant, in kg/s. (b) the power input to the...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant enters the condenser at 16 bar and 190°C, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 50 kW, determine: (a) the mass flow rate of the refrigerant, in kg/s. (b) the power input to the...
Thermodynamics. No interpolation needed.
Problem #3. Refrigerant 134a is the working fluid for vapor-compression refrigeration cycle. The evaporator temperature is 8°C and the condenser pressure is 12 bar. Saturated vapor enters the compressor and superheated vapor enters the condenser at 60°C and exits the condenser as saturated liquid. For a refrigeration capacity of 8 tons or 2.816 x104 J/s determine the following: (1) The refrigerant mass flow rate in kg/s; (2) The compressor isentropic efficiency [Hint: Interpolation is required); (3)...
A heat pump using refrigerant-134a as a refrigerant operates its condenser at 800 kPa and its evaporator at −1.25°C. It operates on the ideal vapor-compression refrigeration cycle. What is the COP of the heat pump for the case when the vapor entering the compressor is superheated by 2°C and for the case when the compressor has no irreversibilities? The COP of the heat pump when the compressor has no irreversibilities is____. The COP of the heat pump when the vapor...
A vapor compression refrigeration system operates at steady
state with refrigerant 134a as the working fluid. Superheated vapor
enters the compressor at 10 lbf/in2 , 0 oF. The liquid leaving the
condenser is at 180 lbf/in2 , 100 oF. There is no significant
pressure drop in the evaporator or condenser. For compressor
efficiency of 83% and refrigeration capacity of 6 tons,
determine
(a) the compressor power input in horsepower, and
(b) the coefficient of performance.
A vapor compression refrigeration system...
An ideal vapor-compression refrigeration cycle with R-134a as the working fluid has an evaporator temperature of-15 °C and a condenser pressure of 12 bar. Saturated vapor enters the compressor, and saturated liquid exits the condenser. The mass flow rate of the refrigerant is 3.5 kg/min. Draw and label the cycle on a T-s diagram. What is the coefficient of performance? Ans. 2.98 What is the refrigerating capacity in tons? a. b. c.
An ideal vapor compression refrigeration cycle uses refrigerant 12 as a working fluid in an air conditioning system. The refrigerant enter the compressor as saturated vapor at 5oC and leaves the condenser as saturated liquid at 55oC. The mass flow rate of refrigerant is 0.7 kg/s. Heat is transferred from a reservoir at 15oC (the cool space) to the refrigerant in the evaporator and the heat rejected by the condenser is transferred to the environment which is at a temperature...