Homework Answers
Add Answer to:
4.55 A compressor brings R-134a from 150 kPa. -10°C to 1200 kPa, 50°C. It is water...
A vapor compression refrigeration cycle utilizes R-134a as the working fluid. The refrigerant flow rate is 50 g/s. Vapor at 150 kPa and -10 0C enters the compressor and leaves at 1.2 MPa and 75 0C. Th...
A vapor compression refrigeration cycle utilizes R-134a as the working fluid. The refrigerant flow rate is 50 g/s. Vapor at 150 kPa and -10 0C enters the compressor and leaves at 1.2 MPa and 75 0C. The power input to the non-adiabatic compressor is measured and found to be 2.4 kW. The refrigerant enters the expansion valve at 1.15 MPa and 40 0C and leaves the evaporator at 160 kPa and -15 0C. Determine the entropy generation in the compression...
3) A vapor-compression refrigerator uses refrigerant-134a. Superheated vapor enters the compressor at 100 kPa and -20°...
3) A vapor-compression refrigerator uses refrigerant-134a. Superheated vapor enters the compressor at 100 kPa and -20° C, and exits at 1 MPa and 60° C. The refrigerant is cooled to 35° C in the condenser and then expands back to 100 kPa through an expansion valve. Neglect pressure losses within the condenser and evaporator. The refrigerant flow rate is 0.10 kg/s. Calculate the following a) the rate of heat removal from the cooled space, in kw, b) the rate of...
(33%) An insulated compressor is used in an air conditioner that uses R-134a as the working fluid...
(33%) An insulated compressor is used in an air conditioner that uses R-134a as the working fluid. The R-134a enters °C. The mass flow rate of the R-134a through the compressor is 0.1 kg/s. Determine the following: the compressor as a saturated vapor at 4 °C and exits at 10 bar, 70 1-a) The compressor inlet pressure in bar 1-b) The compressor work per unit mass in kJ/kg. 1-c) The compressor power requirement in kW.
(33%) An insulated compressor is...
Refrigerant 134a enters a compressor with a mass flow rate of 15 kg/s with a velocity...
Refrigerant 134a enters a compressor with a mass flow rate of 15 kg/s with a velocity of 10 m/s. The refrigerant enters the compressor as a saturated vapor at 10°C and leaves the compressor at 1400 kPa with an enthalpy of 281.39 kJ/kg with a negligible velocity. The rate of work done on the refrigerant is measured to be 380 kW. If the elevation change between the compressor inlet and exit is negligible, determine the rate of heat transfer associated...
QUESTION 3 Refrigerant-134a enters a compressor at 100 kPa and -20°C with flow rate of 1.601...
QUESTION 3 Refrigerant-134a enters a compressor at 100 kPa and -20°C with flow rate of 1.601 m/min and leaves at 800 kPa and 60 °C. Determine the power input of the compressor in kW (Give your answer with three decimals, and do NOT enter units!!!).
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 MPa and -10°C at a rate of 0.124...
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 MPa and -10°C at a rate of 0.124 kg/s, and it leaves at 0.7 MPa and 50°C. The refrigerant is cooled in the condenser to 24°C and 0.65 MPa, and it is throttled to 0.15 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor...
1 MPa Isentropic Efficiency of a Compressor Refrigerant-134a enters an adiabatic compressor as a saturated vapor...
1 MPa Isentropic Efficiency of a Compressor Refrigerant-134a enters an adiabatic compressor as a saturated vapor at 100kPa at a rate of 0.7 m/min and exits at 1-MPa pressure. The isentropic efficiency of the compressor is 87%. R-134a Compressor Isentropic Compressor Work hs-h 100 kPa sat. vapor Actual Compressor Work Determine the refrigerant properties at the inlet and outlet for an isentropic process. Actual 2s entropic procEss Inlet state Determine the actual isentropic enthalpy from the efficiency. (Ans: 289.71 J/kg)...
Problem #3 Refrigerant R-134a enters the condenser of a heat pump at 1000 kPa and 80°C...
Problem #3 Refrigerant R-134a enters the condenser of a heat pump at 1000 kPa and 80°C at a rate of 0.025 kg/s and leaves at 1000 kPa as saturated liquid. If the compressor consumes 2 kW of power, determine: a) The COP of the heat pump (as heating device). b) The rate of heat absorption from the outside air. тан Condenser Throttling valve Compressor Evaporator To
A vapor-compression heat pump system uses Refrigerant R-134a as the working fluid. The refrigerant enters the...
A vapor-compression heat pump system uses Refrigerant R-134a as the working fluid. The refrigerant enters the compressor at 2.0bar, -5degC and with a mass-flow rate of 26g/s. Compression is adiabatic to 11.6bar, 60degC and the refrigerant exits the condenser 8degC sub-cooled. a) Draw a P-h chart to visualise the refrigeration cycle and display known data. b) Determine the power input to the compressor in kW c) Determine the heating capacity of the system in kW d) Determine the coefficient of...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, dete...
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (e) the COP, and (d) the g waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. 1.2 MPa and 50°C and leaves at the same...
3) A vapor-compression refrigerator uses refrigerant-134a. Superheated vapor enters the compressor at 100 kPa and -20° C, and exits at 1 MPa and 60° C. The refrigerant is cooled to 35° C in the condenser and then expands back to 100 kPa through an expansion valve. Neglect pressure losses within the condenser and evaporator. The refrigerant flow rate is 0.10 kg/s. Calculate the following a) the rate of heat removal from the cooled space, in kw, b) the rate of...
(33%) An insulated compressor is used in an air conditioner that uses R-134a as the working fluid. The R-134a enters °C. The mass flow rate of the R-134a through the compressor is 0.1 kg/s. Determine the following: the compressor as a saturated vapor at 4 °C and exits at 10 bar, 70 1-a) The compressor inlet pressure in bar 1-b) The compressor work per unit mass in kJ/kg. 1-c) The compressor power requirement in kW.
(33%) An insulated compressor is...
QUESTION 3 Refrigerant-134a enters a compressor at 100 kPa and -20°C with flow rate of 1.601 m/min and leaves at 800 kPa and 60 °C. Determine the power input of the compressor in kW (Give your answer with three decimals, and do NOT enter units!!!).
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 MPa and -10°C at a rate of 0.124 kg/s, and it leaves at 0.7 MPa and 50°C. The refrigerant is cooled in the condenser to 24°C and 0.65 MPa, and it is throttled to 0.15 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor...
1 MPa Isentropic Efficiency of a Compressor Refrigerant-134a enters an adiabatic compressor as a saturated vapor at 100kPa at a rate of 0.7 m/min and exits at 1-MPa pressure. The isentropic efficiency of the compressor is 87%. R-134a Compressor Isentropic Compressor Work hs-h 100 kPa sat. vapor Actual Compressor Work Determine the refrigerant properties at the inlet and outlet for an isentropic process. Actual 2s entropic procEss Inlet state Determine the actual isentropic enthalpy from the efficiency. (Ans: 289.71 J/kg)...
Problem #3 Refrigerant R-134a enters the condenser of a heat pump at 1000 kPa and 80°C at a rate of 0.025 kg/s and leaves at 1000 kPa as saturated liquid. If the compressor consumes 2 kW of power, determine: a) The COP of the heat pump (as heating device). b) The rate of heat absorption from the outside air. тан Condenser Throttling valve Compressor Evaporator To
A commercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at by The refrigerant enters the condenser at compressor consumes 3.3 kW of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (e) the COP, and (d) the g waste heat to cooling water that enters the condenser at 18°C at a rate of 0.25 kg/s and leaves at 26°C. 1.2 MPa and 50°C and leaves at the same...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago