A uniform board with a length of 12 m and weighing 700 N is carried by...

Question

Question

A uniform board with a length of 12 m and weighing 700 N is carried by two people. The first person is at one end of the boar

science physics

Answer 1

Answer #1

Ев Helv 3.4m 2.6 m mg stored and in equilibrium 1. Since body is .. Net torque =0 A Torque about o= mg x 6 - f x 9.4 F = 700x ..........

Answer 2

Similar Homework Help Questions

A uniform ladder 7.3 m long weighing 500 N rests with one end on the ground...

A uniform ladder 7.3 m long weighing 500 N rests with one end on the ground and the other end against a perfectly smooth vertical wall. The ladder rises at 55.0 ∘ above the horizontal floor. A 760 N painter finds that she can climb 2.70 m up the ladder, measured along its length, before it begins to slip. a)What force does the wall exert on the ladder? b)Find the friction force that the floor exerts on the ladder? Please...
Two people are carrying a uniform wooden board that is 3.40 m long and weighs 160 N.

Two people are carrying a uniform wooden board that is 3.40 m long and weighs 160 N.If one person applies an upward force equal to 60.0 N at one end, at what point does the other person lift?d=? Units= m from the end where the first person liftsPlease help !!! I have tried everything and keep getting the wrong answer and only have 1 attempt left !
3) Two people carry a heavy electric motor by placing it on a uniform board, m...

3) Two people carry a heavy electric motor by placing it on a uniform board, m 10 kg, 2.00 m long. One person lifts at one end with a force of 500 N, and the other lifts at the opposite end with a force of 700 N Start by drawing a sketch of the situation above. Carefully label all the forces on the motor/board system (a) What is the mass of the motor (5 points)? (b) Where is the motor...

A uniform beam of length L = 7.85 m and weight 4.20 102 N is carried...

A uniform beam of length L = 7.85 m and weight 4.20 102 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam. FSam = FJoe =
A flat, uniform board, which has mass 3.60kg and a length 0.50m, is held in a...

A flat, uniform board, which has mass 3.60kg and a length 0.50m, is held in a horizontal orientation by two vertical ropes. One rope is attached at the left end of the board and the other rope is attached at a point (3/4)L from the left end of the board. What force does the rope on the right exert of the board?
Two people carry a heavy electric motor by placing it on a light board 2.80 m...

Two people carry a heavy electric motor by placing it on a light board 2.80 m long. One person lifts at one end with a force of 450 N. and the other lifts the opposite end with a force of 670 N. What is the weight of the motor? Part B Where along the board is its center of gravity located? PartC Suppose the board is not light but weighs 220 N. with its center of gravity at its center,...

A uniform beam of length L = 7.50 m and weight 4.70 x io2 N is...

A uniform beam of length L = 7.50 m and weight 4.70 x io2 N is carried by two workers, Sam and Joe, as shown in the figure below. Determine the force that each person exerts on the beam. N
A shop sign weighing 228 N is supported by a uniform 103 N beam of length...

A shop sign weighing 228 N is supported by a uniform 103 N beam of length L = 1.75 m, hinged to the wall. A) A guy wire is connected D = 1.21 m from the wall. Find the tension in the guy wire. Assume θ = 38.3°. B) Find the horizontal force exerted by the hinge on the beam. C)Find the vertical force exerted by the hinge on the beam. (Use up as the positive direction.)
A uniform beam of length 7.60 m and weight 3.90 102 N is carried by two workers, Sam and Joe, as...

A uniform beam of length 7.60 m and weight 3.90 102 N is carried by two workers, Sam and Joe, as shown in the figure below.(a) Determine the forces that each person exerts on the beam.F_Sam =NF_Joe =N(b) Qualitatively, how would the answers change if Sam moved closer to the midpoint? (c) What would happen if Sam moved beyond the midpoint?

A 3m long diving board weighing 50 N is supported at one end and at a...

A 3m long diving board weighing 50 N is supported at one end and at a pivot 1 m from the end. At the other end stands a diver weighing 100 N. What are the forces on the board from the support and the pivot?