Homework Answers
Add Answer to:
please explain
(10%) Heat transfer in clean, round pipes follows the empirical correlation, Nu 0.0225 Re8...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water i...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
A) Determine the convection heat transfer coefficient for the flow of air. [W/m2·°C] B) Determine the...
A) Determine the convection
heat transfer coefficient for the flow of air.
[W/m2·°C]
B) Determine the convection heat transfer coefficient for water.
[W/m2·°C]
The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...
Twenty [kw] of heat is to be removed from 375 [k] water flowing at 0.15 [kg/s] into the inner pipe of concentric tube heat exchanger. Cooling water enters the annulus at 290 [k] and leaves at 320...
Twenty [kw] of heat is to be removed from 375 [k] water flowing at 0.15 [kg/s] into the inner pipe of concentric tube heat exchanger. Cooling water enters the annulus at 290 [k] and leaves at 320 [k] with a flow in the opposite direction of the inner flow. The diameter of the thin- walled inner pipe is 2.5 [cm] a) b) c) Calculate the exit temperature of the hot fluid and the mass flow rate of the cold fluid...
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is c...
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is carrying heat transfer fluid (HTF) of 450 °C. The ambient temperature is 25 °C. The pipe has a diameter of 5 cm but the pipe wall thickness is 3 mm. Determine the rate of heat conduction through the pipe wall per unit area of wa Copper has thermal conductivity k-400 w/m.К. (Points 10) If the pipe temperature is same as that of fluid inside, calculate...
I need Q5 Heat transfer Problem(.) In an experiment, it is found that the local convection...
I need Q5
Heat transfer
Problem(.) In an experiment, it is found that the local convection coefficient on a flat plate of length L is given by: (10 marks) h,-o923 (k/x){(V. ?.?)/p)as, where k, V, p, and ? are constants. Determine the average convection coefficient over the plate h Problem (5) (10 marks) Milk is flowing with a mass flow rate m 0.6 kg/s, in a pipe with internal diameter - 3 cm. Its initial temperature is 50 °C and...
25 PRR HEAT TRANSFER NAME: UNIT SIX AND SEVEN EXCHANGERS BOILING AND CONDENSATION, He- Solve the following problems:...
25 PRR HEAT TRANSFER NAME: UNIT SIX AND SEVEN EXCHANGERS BOILING AND CONDENSATION, He- Solve the following problems: 1. In a gas-faired boiler, water is boiler at 150 C by hot gases flowing through 59 m long, 5 cm outer diameter mechanically polished stailess-stell pipes submerged in water, If the outer surface temperature of the pipes is 180 °C. determine (a) the rate of heat transfer from the hot gases to water. (b) the rate of evaporation, (c) the ratio...
(a) (iWhen is heat transfer through a fluid by conduction or by convection? For what case...
(a) (iWhen is heat transfer through a fluid by conduction or by convection? For what case is the rate of heat transfer higher? How does the convection heat transfer coefficient differ from the thermal conductivity of a fluid? (ii) Explain the physical significance of Nusselt number (ii) By definition, discuss hydraulic diameter. Obtain an expression for hydraulic diameter of a circular tube of diameter, D (b) The local atmospheric pressure in Gboko, Benue State Nigeria (elevation 1610 m), is 834...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
Consider an oil of density p 800 kg/m3, viscosity u 0.01 Pa.s (10 times the viscosity of water), ...
Consider an oil of density p 800 kg/m3, viscosity u 0.01 Pa.s (10 times the viscosity of water), heat capacity of Cp 2 k]/(kg K) and thermal conductivity of Koll -0.15 W/(mk). This oil flows at mass flowrate of 30 kg/minute through a copper pipe of d- 2 cm inner diameter, with wall thickness of t-1 mm. At the relevant conditions, copper has thermal conductivity of ke 400 W/(m.K). The copper pipe loses heat to the surroundings of Tsurr 20°C...
system, hot water at an average temperature of 80°C is flowing through a 15-m section of...
system, hot water at an average temperature of 80°C is flowing through a 15-m section of a cast In a heating iron pipe (k 50 W/m K) whose inner and outer diameters are 4 cm and 5 cm, respectively. The outer surface of the pipe, whose emissivity is 0.75, is exposed to the cold air at 10°C in the basement. with a heat transfer coefficient of 15 W/m2.K. The heat transfer coefficient at the inner surface of the pipe is...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
A) Determine the convection
heat transfer coefficient for the flow of air.
[W/m2·°C]
B) Determine the convection heat transfer coefficient for water.
[W/m2·°C]
The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...
Twenty [kw] of heat is to be removed from 375 [k] water flowing at 0.15 [kg/s] into the inner pipe of concentric tube heat exchanger. Cooling water enters the annulus at 290 [k] and leaves at 320 [k] with a flow in the opposite direction of the inner flow. The diameter of the thin- walled inner pipe is 2.5 [cm] a) b) c) Calculate the exit temperature of the hot fluid and the mass flow rate of the cold fluid...
3. Heat Transfer Mechanism: (Total points 30 Suppose copper pipe in a parabolic concentrator is carrying heat transfer fluid (HTF) of 450 °C. The ambient temperature is 25 °C. The pipe has a diameter of 5 cm but the pipe wall thickness is 3 mm. Determine the rate of heat conduction through the pipe wall per unit area of wa Copper has thermal conductivity k-400 w/m.К. (Points 10) If the pipe temperature is same as that of fluid inside, calculate...
I need Q5
Heat transfer
Problem(.) In an experiment, it is found that the local convection coefficient on a flat plate of length L is given by: (10 marks) h,-o923 (k/x){(V. ?.?)/p)as, where k, V, p, and ? are constants. Determine the average convection coefficient over the plate h Problem (5) (10 marks) Milk is flowing with a mass flow rate m 0.6 kg/s, in a pipe with internal diameter - 3 cm. Its initial temperature is 50 °C and...
25 PRR HEAT TRANSFER NAME: UNIT SIX AND SEVEN EXCHANGERS BOILING AND CONDENSATION, He- Solve the following problems: 1. In a gas-faired boiler, water is boiler at 150 C by hot gases flowing through 59 m long, 5 cm outer diameter mechanically polished stailess-stell pipes submerged in water, If the outer surface temperature of the pipes is 180 °C. determine (a) the rate of heat transfer from the hot gases to water. (b) the rate of evaporation, (c) the ratio...
(a) (iWhen is heat transfer through a fluid by conduction or by convection? For what case is the rate of heat transfer higher? How does the convection heat transfer coefficient differ from the thermal conductivity of a fluid? (ii) Explain the physical significance of Nusselt number (ii) By definition, discuss hydraulic diameter. Obtain an expression for hydraulic diameter of a circular tube of diameter, D (b) The local atmospheric pressure in Gboko, Benue State Nigeria (elevation 1610 m), is 834...
A counter-flow heat exchanger is stated to have an overall heat transfer coefficient of 284 W/m2.K when operating at design and clean conditions. Hot fluid enters the tube side at 101°C and exits at 71°C, while cold fluid enters the shell side at 27°C and exits at 42°C. After a period of use, built-up scale in the heat exchanger gives a fouling factor of 0.0004 m2 K/W. The surface area is 93 m². Assume both hot and cold fluids have...
Consider an oil of density p 800 kg/m3, viscosity u 0.01 Pa.s (10 times the viscosity of water), heat capacity of Cp 2 k]/(kg K) and thermal conductivity of Koll -0.15 W/(mk). This oil flows at mass flowrate of 30 kg/minute through a copper pipe of d- 2 cm inner diameter, with wall thickness of t-1 mm. At the relevant conditions, copper has thermal conductivity of ke 400 W/(m.K). The copper pipe loses heat to the surroundings of Tsurr 20°C...
system, hot water at an average temperature of 80°C is flowing through a 15-m section of a cast In a heating iron pipe (k 50 W/m K) whose inner and outer diameters are 4 cm and 5 cm, respectively. The outer surface of the pipe, whose emissivity is 0.75, is exposed to the cold air at 10°C in the basement. with a heat transfer coefficient of 15 W/m2.K. The heat transfer coefficient at the inner surface of the pipe is...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago