An ideal Rankine cycle works according to the information shown in the figure.
If the isentropic efficiency of the pump is 80%, determine the current work input of the pump and the most important flow is 12 kg / s.
Homework Answers
Add Answer to:
An ideal Rankine cycle works according to the information shown
in the figure.
If the isentropic...
Problem 2. (11 points) The ideal simple Rankine operates at a pressure of 100 kPa in...
Problem 2. (11 points) The ideal simple Rankine operates at a pressure of 100 kPa in the condenser and at a pressure of 4.5 MPa in the evaporator. The liquid leaving the condenser is a saturated mixture with quality x-0.8. The mass flow rate of steam in the cycle is 1.5 kg/s. Plot the cycle on power-generation cycle using steam (a) T-s diagram for steam; and determine (b) What is the maximum temperature (°C) of this Rankine cycle (c) the...
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of...
A steam power plant operates on an ideal reheat Rankine cycle between the pressure limits of 5 MPa and 100 kPa. The temperature of the steam att the turbine is 500 C degree and the mass flow rate of steam through the cycle is 35 kg/s. a) Determine the thermal efficiency of the cycle. b) determine the net power output of the power plant ( Assume both the turbine and the pump have isentropic efficiency of 100%). c) Draw the...
10-12A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of...
10-12A steam power plant operates on a simple ideal Rankine cycle between the pressure limits of 3 MPa and 50 kPa. The temperature of the steam at the turbine inlet is 300°C, and the mass flow rate of steam through the cycle is 35 kg/s. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the thermal efficiency of the cycle and (b) the net power output of the power plant. If it is actual...
Consider a steam power plant which operates on the simple ideal Rankine cycle (shown in the...
Consider a steam power plant which operates on the simple ideal
Rankine cycle (shown in the next page), where the boiler pressure
is 3 MPa and the condenser saturation temperature is 50°C. The
temperature at the exit of the boiler is 500°C. Water leaves the
condenser as a saturated liquid. The mass flow rate through each
component is 15 kg/s. Calculate:
1. The power output of the steam power plant
2. The thermal efficiency of the steam power plant
Now,...
(30 points) Rankine Cycle An ideal Rankine cycle has a turbine power output of 4 MW....
(30 points) Rankine Cycle An ideal Rankine cycle has a turbine power output of 4 MW. Saturated liquid at 20 kPa leaves the condenser, and the vapor at the exit to the isentropic turbine has a quality of 95 percent. The boiler pressure is 1.4 MPa. a. Find the mass flow rate of the steam (kg/s) b. What is the heat transfer into the boiler? c. What is the thermal efficiency for this cycle? Condenser
Consider a steam power plant that operates on the ideal regenerative Rankine cycle with a closed...
Consider a steam power plant that operates on the ideal
regenerative Rankine cycle with a closed feedwater heater as shown
in the figure. The plant maintains the turbine inlet at 3000 kPa
and 3508C; and operates the condenser at 20 kPa. Steam is extracted
at 1000 kPa to serve the closed feedwater heater, which discharges
into the condenser after being throttled to condenser pressure.
Calculate the work produced by the turbine, the work consumed by
the pump, and the heat...
A Rankine cycle with reheat and 2 non-ideal turbines has the following relevant states. - Water...
A Rankine cycle with reheat and 2 non-ideal turbines has the following relevant states. - Water leaves the condenser as a saturated liquid with a pressure of 80.0 kPa As it passes through the ideal pump, it is raised to a pressure of 7 MPa The high pressure turbine has an isentropic efficiency of 91.0% The low pressure turbine has an isentropic efficiency of 91.0%. - The boiler raises adds heat isobarically until the substance has a temperature of 350...
A simple Rankine cycle with a non-ideal turbine has the following relevant states: - Water leaves...
A simple Rankine cycle with a non-ideal turbine has the
following relevant states: - Water leaves the condenser as a
saturated liquid with a pressure of 100.0 kPa. - As it passes
through the ideal pump, it is raised to a pressure of 7 MPa. - The
boiler raises adds heat isobarically until the substance has a
temperature of 350∘C. - The turbine has an isentropic efficiency of
89.0%. - The mass flow rate through the system is 25 kg/s...
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters...
Consider a 210-MW steam power plant that operates on a simple ideal Rankine cycle. Steam enters the turbine at 10 MPa and 500°C and is cooled in the condenser at a pressure of 10 kPa. Assume an isentropic efficiency of 85 percent for both the turbine and the pump. (a) the quality of the steam at the turbine exit (b) the thermal efficiency of the cycle (c) the mass flow rate of the steam.
Water is the working substance for an ideal Rankine cycle. The condenser pressure is equal to...
Water is the working substance for an ideal Rankine cycle. The condenser pressure is equal to 7.5 kPa. The boiler pressure is 8 MPa. Find: a) The specific work required by the pump b) The specific heat addition for the boiler c) The specific heat rejection for the condenser d) The specific work out of the turbine e) The thermal efficiency of the cycle 2. Solve problem 1, but this time assuming that the temperature at the inlet of the...
Problem 2. (11 points) The ideal simple Rankine operates at a pressure of 100 kPa in the condenser and at a pressure of 4.5 MPa in the evaporator. The liquid leaving the condenser is a saturated mixture with quality x-0.8. The mass flow rate of steam in the cycle is 1.5 kg/s. Plot the cycle on power-generation cycle using steam (a) T-s diagram for steam; and determine (b) What is the maximum temperature (°C) of this Rankine cycle (c) the...
Consider a steam power plant which operates on the simple ideal
Rankine cycle (shown in the next page), where the boiler pressure
is 3 MPa and the condenser saturation temperature is 50°C. The
temperature at the exit of the boiler is 500°C. Water leaves the
condenser as a saturated liquid. The mass flow rate through each
component is 15 kg/s. Calculate:
1. The power output of the steam power plant
2. The thermal efficiency of the steam power plant
Now,...
(30 points) Rankine Cycle An ideal Rankine cycle has a turbine power output of 4 MW. Saturated liquid at 20 kPa leaves the condenser, and the vapor at the exit to the isentropic turbine has a quality of 95 percent. The boiler pressure is 1.4 MPa. a. Find the mass flow rate of the steam (kg/s) b. What is the heat transfer into the boiler? c. What is the thermal efficiency for this cycle? Condenser
Consider a steam power plant that operates on the ideal
regenerative Rankine cycle with a closed feedwater heater as shown
in the figure. The plant maintains the turbine inlet at 3000 kPa
and 3508C; and operates the condenser at 20 kPa. Steam is extracted
at 1000 kPa to serve the closed feedwater heater, which discharges
into the condenser after being throttled to condenser pressure.
Calculate the work produced by the turbine, the work consumed by
the pump, and the heat...
A Rankine cycle with reheat and 2 non-ideal turbines has the following relevant states. - Water leaves the condenser as a saturated liquid with a pressure of 80.0 kPa As it passes through the ideal pump, it is raised to a pressure of 7 MPa The high pressure turbine has an isentropic efficiency of 91.0% The low pressure turbine has an isentropic efficiency of 91.0%. - The boiler raises adds heat isobarically until the substance has a temperature of 350...
A simple Rankine cycle with a non-ideal turbine has the
following relevant states: - Water leaves the condenser as a
saturated liquid with a pressure of 100.0 kPa. - As it passes
through the ideal pump, it is raised to a pressure of 7 MPa. - The
boiler raises adds heat isobarically until the substance has a
temperature of 350∘C. - The turbine has an isentropic efficiency of
89.0%. - The mass flow rate through the system is 25 kg/s...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago