Find the efficiency of a transformer given the following : 240mrsV and 100mA of primary 18 V and 15 Ohms of secondary.
Find the efficiency of a transformer given the following : 240mrsV and 100mA of primary 18...
Q- Find the efficiency of a transformer if the primary side has 240 rmsV and # rmsA (given) and the secondary side has # V (given) and # ohms (given) * You don't have to care about the word ( given) .. you can choose any value you want .. I just need to know how to solve this kind of problem
Find the following for an input of 120 VAC(RMS), 60 hertz, given a 20:1 stepdown transformer. The secondary is less voltage than the primary. Rload is 100 ohms. Round off to the nearest tenths place. 1a: Primary or input peak voltage = 1b: Secondary peak voltage = 1c: Primary peak current =
4. Given the power transformer circuit below: a. Given the resistor on the secondary output side is 100 ohms with a v across it of 40 volts, what is the transformer turns ratio, N? oltage b. What is the resistance '"seen" by the primary winding? c. What is the primary current, Ip? d. What is the secondary current, Is? 120 V ( boh3
Part A: A transformer with turns ratio (primary/secondary) of 18:1 is used to step down the voltage from a 120 V wall socket to be used in a battery charger. What is the voltage supplied to the recharger? Part B: The electric motor in a toy train requires a voltage of 9.0 V. Find the ratio of turns on the primary coil to the turns on the secondary coil in a transformer that will step the 120-V household voltage down...
three-phase transformer is rated at 12 kV/135 kV, 100 MVA. It has the following equivalent circuit parameters (referred to the primary winding where appropriate) : • primary resistance R1 = 0.03 ohms, secondary resistance R2’ = 0.04 ohms • primary leakage reactance X1 = 0.1 ohms, secondary leakage reactance X2’ = 0.1 ohms • magnetising reactance XM = 16 ohms, core-loss resistance RC = 200 ohms. In your calculations, you should use the simplified equivalent circuit. i) The transformer is...
A 5 KVA, 480/120V, 60 Hz, non-ideal transformer has the following primary and secondary resistance and reactance values R 80,X1-12Q, R 0.15Q, X 0.20, R 18 KQ, and X 15 KO If the transformer is operating at 90% of its rated load current and the voltage is leading the current by 40 degree: a) Draw the approximate equivalent circuit of the transformer referred to secondary side, b) Calculate the efficiency of the transformer, and c) The voltage regulation
A transformer is wound 34 times on the primary side and 16 times on the secondary side. If maximum EMF on the secondary side is 50 volts, what is the current on the primary side, in amps, if the resistance on the primary side is 7 Ohms? Hint: first find the maximum EMF on the primary side.
A transformer with turns ratio 8:1, has the resistances of the primary and secondary windings as 0.85 ohms and 0.012 ohm respectively, and the leakage reactances are 4.8 ohms and 0.07 ohms respectively. Determine the voltage to be applied to the primary to obtain current of 150A in the secondary when the secondary terminals are short circuited, Ignore the magnetizing current
70. A transformer with a turns ratio (secondary/primary) of 1:18 is used to step down the voltage from a 120-V wall socket to be used in a battery recharging unit. What is the voltage supplied to the recharger?
A transformer has 500 turns in the primary and 50 turns in the secondary. If the input voltage is 120V, what is the output voltage? Answer: V If the transformer has an efficiency of 92%, what is the output current if the input current at 120V is 0.50A? Answer: А