1. Calculate the concentrations of each of your serial dilution solutions. Report the temperature of the “room temperature” deionized water Show the complete calculations (with appropriate units and significant figures) for the first solution as a sample and the complete Table 1 (below) with the results for all of the solutions.
|
Solution |
Concentration (M) of crystal violet |
Absorbance at 590 nm |
|
Blank |
0.00 |
0.000 |
|
Stock solution |
1.00 x 10-5 |
0.851 |
|
Solution 1 |
0.411 |
|
|
Solution 2 |
0.203 |
|
|
Solution 3 |
0.097 |
|
|
Solution 4 |
0.049 |
|
Solution |
Preparation |
Total Volume of Solution |
|
Stock Solution |
NO PREPARATION – 1.00x10-5 M Stock Solution |
N/A |
|
Solution 1 |
25.00 mL of Stock Solution |
50.00 mL |
|
Solution 2 |
25.00 mL of Solution 1 |
50.00 mL |
|
Solution 3 |
25.00 mL of Solution 2 |
50.00 mL |
|
Solution 4 |
25.00 mL of Solution 3 |
50.00 mL |
1. Calculate the concentrations of each of your serial dilution solutions. Report the temperature of the...
Five standard solutions of HBr are prepared by serial dilution in which, at each stage, 10.00 mL are diluted to 160.00 mL. Given that the concentration of the most dilute solution is 2.62 × 10−6 M, determine the concentration of the original HBr stock solution.
Answer
3) The concentration of phosphorous in a stock solution is 10.0 ppm. After the dilution by DI water, three new solutions are prepared as shown in the following table. Find the concentration of phosphorous in these solutions. Show all calculation processes to receive the credit. (6 pts) Phosphorous Concentration After dilution (ppm) Solution # Stock Solution (mL) Total Volume After dilution (ml.) 25.00 2.50 1 50.00 2 8.00 250.0 3 50.00
Use stock solution of 0.5 M CuSO4 to make up the following solutions by serial dilution to a final volume of 1 ml: 50mM, 5mM, 0.5mM, and 0.05mM Please show 'how many DI water 0.5M CuSO4 needed to be used?'
In lab you carried out a serial dilution and calculated the concentration of each solution. Starting with a 2.05 M HCl stock solution, three standard solutions are prepared by sequentially diluting 5.00 mL of each solution to 150.0 mL. What is the concentration of the final solution? 0.0683 M 2.28 times 10^-3 M 9.11 times 10^-6 M 7.59 times 10^-5 M 2.53 times 10^-6 M
Electrolytes, Concentration and Dilution of Solutions n this part of the experiment, you will make a dilution of a stock solution of known concentration and calculate the concentration of the dilute solution. DILUTION OF A STOCK SOLUTION PART C: Measurements and Observations Procedure Check out a 100-mL volumetric flask from your instructor. Fill test tube about 2/3 concentration of the active ingredient from its label including units. Record 1. orlt O " concentration of active ingredient. full of "Magic 2....
Prelaboratory assignment Exp. 4 Beer’s Law
1.Calculate the Concentration of the Crystal Violet Solutions in
Table 1 of the Procedureusing Vinitial x Minitial = Vdiluted x
Mdiluted (Note: Vdiluted = 15 mL). Record the concentrationsin
Table 1 AND in the Data table in the report sheet.
2.Plot the following data as absorbance vs concentration of X in
excel
Absorbance, A Molar Concentration of X
0.045 3.0 x 10-4 mol/L
0.097 6.2 x 10-4 mol/L
0.14 9.0 x 10-4 mol/L...
1. Using the volumes and concentrations given in Table 13-2 of the instructions, calculate the diluted concentration of the hydroxide ion at time zero, (OH), for each of the 3 solutions. You must take into account the total volume after all solutions have been added together. Show your work here and record the values on your Report Sheet in Table 13-4 as well. (Hint: CV = CV, may be applied here). (1.0 point] Solution Calculated [OH'] Table 13-2: Preparation of...
Suppose you were to make your own standards (via serial dilution) using 6 tubes. You start with tube #1- you have 450 uL of assay buffer and add 50 uL of estradiol stock solution. Then you take out 100 uL from tube # 1 and add it to 300 uL assay buffer in tube #2, this is repeated for tubes #3-6 (for tube #3 remove 100 uL from tube #2, etc.). In tube #1 you end up with a final...
1. On a serial dilution with the following tubes set up, 1:2, 1:4, 1:8, 1:16, 1:32, and 1:64, there is no visible agglutination in the 1:64 tube. What is the titer of the antibody? A. 32 B. 16 C. 64 D. Cannot be determined 2. If you want to make 2 mL of a 1:20 dilution, how much serum would be needed? 3. When 1.0 mL of serum is added to 3.0 mL of diluent, what dilution does this represent?...
QUESTION: Using the volumes and concentrations given in Table 13-2 of the instructions, calculate the diluted concentration of the hydroxide ion at time zero, [OHlo, for each of the 3 solutions. You must take into account the total volume after all solutions have been added together. Show your work here and record the values on your Report Sheet in Table 13-4 as well. (Hint: CV C2V2 may be applied here). [1.0 point] 1. Solution Calculated [OH] Table 13-2: Preparation of...