A fire hose of diameter 6.4cm has the speed of flow 4m/s the (horizontal) fire hose ends in a metal tip of diameter 2.5cm what is the velocity of the water in the tip ?
A fire hose of diameter 6.4cm has the speed of flow 4m/s the (horizontal) fire hose...
A fire hose of diameter 6.4cm has the speed of flow 4m/s the (horizontal) fire hose ends in a metal tip of diameter 2.5cm what is the velocity of the water in the tip ?
(a) What is the fluid speed (in m/s) in a fire hose with a 8.50 cm diameter carrying 74.0 L of water per second? m/s (b) What is the flow rate in cubic meters per second? m3/s (c) Would your answers be different if salt water replaced the fresh water in the fire hose? Yes, because the velocity and the flow rate are directly proportional to the fluid's density. No, because the velocity and the flow rate are independent of...
for the center of mass. .8.39 A fire hose 4.00 cm in diameter is capable of spraying water at a velocity of 10.0 m/s. For a continuous horizontal flow of water, what horizontal force should a fireman exert on the hose to keep it stationa
Water flows through a fire hose of diameter 6.35 cm at a rate of 0.0115 m3/s. The fire hose ends in a nozzle of inner diameter 2.20 cm. What is the speed with which the water exits the nozzle? ? m/s
Water flows from a fire truck through a hose that is 11.7 cm in diameter and has a nozzle that is 2.0 cm in diameter. When water leaves the nozzle, it has a speed of 20 m/s. Determine the minimum gauge pressure in the truck's water tank.
Water flow through a rubber hose 10cm in diameter at a velocity of 4 m/s. What must be the diameter of nozzle in order that the water emerge at 16 m/s?
9. A fire hose nozzle has a diameter of 0.03m, and must be able to deliver a flow rate of 1 cubic meter per minute. If the nozzle is attached to a hose with 10cm diameter, what pressure must be maintained just upstream of the nozzle to deliver this flow rate? Assume no energy loss. OSS
Water from a fire hose is directed toward a building as shown in the figure below. The water leaves the hose at a speed of vi = 40.0 m/s and at an angle of θi = 42.0° above the horizontal. The base of the hose (at ground level) is a horizontal distance d = 45.0 m away from the building. Find the height h (in m) where the water strikes the building.A fireman on the ground sprays water from a...
Water flows with a speed of 0.430 m/s through a hose with a diameter of 3.30 cm .If the hose is attached to a nozzle with a diameter of 0.722 cm , what is the speed of water in the nozzle?
need help b) and d)
A long, horizontal hose of diameter 4.8 cm is connected to a faucet. At the other end, there is a nozzle of diameter 2 cm. Water squirts from the nozzle at velocity 14 m/sec. Assume that the water has no viscosity or other form of energy dissipation. a) What is the velocity of the water in the hose ? m/s Help Reset Enter * 2.43 2.43 OK b) How long will it take to fill...