What are the four types winding connections in a DC generator? Provide a sketch of each...
Homework Answers
Add Answer to:
What are the four types winding connections in a DC generator?
Provide a sketch of each...
a 6-pole dc generator has a simple wavy winding induced with 288 coils of 5 turns...
a 6-pole dc generator has a simple wavy winding induced with 288 coils of 5 turns each, the resistance of each turn is 0.022 ohms between lap, its flow per pole is .15wb and it is rotating at 600 rpm a) how many current paths there is in the machine b) what is the armature voltage induced in this machine c) what is the effective resistance of the armor of this machine d) if a 5kohm resistor is connected to...
A second separately excited DC generator has the same electrical parameters as the generator in part...
A second separately excited DC generator has the same electrical
parameters as the generator in part (a) first but does not have
compensating windings. The full-load demagnetising armature
reaction is equivalent to 500 Ampere-turns. (i) With Radj = 63Ω and
the generator is driven at 1600rpm, what is the no-load terminal
voltage? (ii) What would be the output terminal voltage if 364A
were drawn from the armature at 1600rpm?
Q2. (a) Fig. Q20) shows a separately excited DC generator with...
12. What is it about the poles pieces of a DC generator that determines if it...
12. What is it about the poles pieces of a DC generator that determines if it will be called a magneto? 13. Name two parts of a DC generator that are made of iron: a. b. 14. Draw a schematic of a series DC generator. Draw a schematic of a shunt DC generator. 15. Why must a “self-excited” series generator have a load connected in order for current to flow in the field, whereas a self-excited shunt generator does not...
Problem 1: A four pole, 60Hz, 3-d synchronous generator has a rotor radius of 15 cm, a rotor length of 2.7m, and an air gap length of 2 mm. The rotor field winding consists of 1000 turns with a wi...
Problem 1: A four pole, 60Hz, 3-d synchronous generator has a rotor radius of 15 cm, a rotor length of 2.7m, and an air gap length of 2 mm. The rotor field winding consists of 1000 turns with a winding factor of 0.962. The Δ connected armature winding has 25 series turns per phase with a winding factor of 0.935. The generator is designed to achieve rated open-circuit voltage at a peak air-gap flux density of 1.25 T (a) At...
A-4 pole, lap-wound, long shunt, dc compound generator has useful flux per pole of 0.07 Wb....
A-4 pole, lap-wound, long shunt, dc compound generator has useful flux per pole of 0.07 Wb. The armature winding consists of 220 turns and the resistance per turns is 0.004 Ω. Calculate the terminal voltage if the resistance of the shunt and series field are 100 Ω and 0.02 Ω respectively; when the generator is running at 900 rpm with armature current 50 A. Also calculate the output power in kW for the generator.
1. Name the various parts of a DC machine and give their function. 2. A four-pole...
1. Name the various parts of a DC machine and give their function. 2. A four-pole de machine with a lap wound armature has a total of 652 armature conductors with an armature resistance of 0.1502. When run as a generator on open circuit at a speed of 400rpm, the armature terminal voltage is 262V. Each pole shoe arc has a diameter of 42cm, subtends an angle of 60° and has an axial length of 20cm. 2.1.Calculate the useful flux...
Q5. 5.a. Sketch the circuit arrangement of a DC-DC boost (step up) converter, clearly labelling each...
Q5. 5.a. Sketch the circuit arrangement of a DC-DC boost (step up) converter, clearly labelling each circuit element [4 тarks] [Refer to lecture notes] Sketch all significant operating waveforms for this converter for continuous conduction conditions over two switching periods, in particular showing 5.b. the voltage across the main switching device and the boost diode. [2 marks the voltage across the inductor [3 тarks] the current flowing through the inductor [3 marks [Refer to lecture notes] 5.c. The DC-DC boost...
In this part of the term paper, design a single-phase switch-mode DC power supply with a forward ...
In this part of the term paper, design a single-phase switch-mode DC power supply with a forward converter. Provide answers to the questions below Please combine the single-phase full-wave rectifier from part two of your term paper with a forward converter to produce a switch-mode DC power supply, as shown below. The output of the bridge rectifier serves as input to the forward converter L1 Np: N BH621BH62 D, V1 Load C1 100p 45 Vrms D3 BH62 18H62 D4 Control...
An eight-pole, 25 kW, 120 V DC generator has a duplex lap-wound armature, which has 64 coils with 16 turns per coil. Its rated speed is 2400 rpm (HELP)
Question: An eight-pole, 25 kW, 120 V DC generator has a duplex lap-wound armature, which has 64 coils with 16 turns per coil. Its rated speed is 2400 rpm.(a) Define a duplex lap-wound DC armature. (b) How much flux per pole is required to produce the rated voltage in this generator at no load conditions? (c) What is the induced torque in this machine at rated load? (d) Determine path current in the armature of this generator at the rated load? ...
A 480 V, 60 Hz, 470 kVA, 0.85 PF lagging, 2-pole, Y-connected synchronous generator has a...
A 480 V, 60 Hz, 470 kVA, 0.85 PF lagging, 2-pole,
Y-connected synchronous generator has a synchronous reactance of
XS=0.016 Ω and an armature resistance of RA=0.016 Ω. At rated
conditions the core losses are 7 kW. Friction losses and field
winding losses are 8 kW. Suppose the machine is connected to an
infinite bus (hence the terminal voltage is fixed) and it is
running at the rated conditions.
a) What is the rotor speed in rpm?
b) Calculate the...
A second separately excited DC generator has the same electrical
parameters as the generator in part (a) first but does not have
compensating windings. The full-load demagnetising armature
reaction is equivalent to 500 Ampere-turns. (i) With Radj = 63Ω and
the generator is driven at 1600rpm, what is the no-load terminal
voltage? (ii) What would be the output terminal voltage if 364A
were drawn from the armature at 1600rpm?
Q2. (a) Fig. Q20) shows a separately excited DC generator with...
Problem 1: A four pole, 60Hz, 3-d synchronous generator has a rotor radius of 15 cm, a rotor length of 2.7m, and an air gap length of 2 mm. The rotor field winding consists of 1000 turns with a winding factor of 0.962. The Δ connected armature winding has 25 series turns per phase with a winding factor of 0.935. The generator is designed to achieve rated open-circuit voltage at a peak air-gap flux density of 1.25 T (a) At...
1. Name the various parts of a DC machine and give their function. 2. A four-pole de machine with a lap wound armature has a total of 652 armature conductors with an armature resistance of 0.1502. When run as a generator on open circuit at a speed of 400rpm, the armature terminal voltage is 262V. Each pole shoe arc has a diameter of 42cm, subtends an angle of 60° and has an axial length of 20cm. 2.1.Calculate the useful flux...
Q5. 5.a. Sketch the circuit arrangement of a DC-DC boost (step up) converter, clearly labelling each circuit element [4 тarks] [Refer to lecture notes] Sketch all significant operating waveforms for this converter for continuous conduction conditions over two switching periods, in particular showing 5.b. the voltage across the main switching device and the boost diode. [2 marks the voltage across the inductor [3 тarks] the current flowing through the inductor [3 marks [Refer to lecture notes] 5.c. The DC-DC boost...
In this part of the term paper, design a single-phase switch-mode DC power supply with a forward converter. Provide answers to the questions below Please combine the single-phase full-wave rectifier from part two of your term paper with a forward converter to produce a switch-mode DC power supply, as shown below. The output of the bridge rectifier serves as input to the forward converter L1 Np: N BH621BH62 D, V1 Load C1 100p 45 Vrms D3 BH62 18H62 D4 Control...
A 480 V, 60 Hz, 470 kVA, 0.85 PF lagging, 2-pole,
Y-connected synchronous generator has a synchronous reactance of
XS=0.016 Ω and an armature resistance of RA=0.016 Ω. At rated
conditions the core losses are 7 kW. Friction losses and field
winding losses are 8 kW. Suppose the machine is connected to an
infinite bus (hence the terminal voltage is fixed) and it is
running at the rated conditions.
a) What is the rotor speed in rpm?
b) Calculate the...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 11 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 11 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 11 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 11 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 11 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 11 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 11 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 11 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 11 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 11 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 11 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 11 months ago