an aluminum sphere with an 8 cm diameter is exposed to 60C air with convection heat transfer coefficient of 35 W/m^2 K. the initial temperature of the phsere is 5 C. a. computer the biot number. b. computer the temperature at the center of the sphere after 5.5 min exposure to the hot air. c. confirm that the lump application is valid.
I have solved the question
step by step and neatly so that you can understand the solution
easily and efficiently. Hope you thumpsup for the work. Thank
you.
an aluminum sphere with an 8 cm diameter is exposed to 60C air with convection heat...
Cold conditioned air at 10°C is flowing inside a 1.5 cm thick square aluminum (k = 240 w/mK) duct of inner cross section of 25x25cm at a mass flow rate of 1.0 kg/s. The duct is exposed to air at 35°C with a combined convection-radiation heat transfer coefficient of 15 W/m2K. The convection heat transfer coefficient at the inner surface is 75 W/.m2.K. If the air temperature in the duct should not increase by more than 1°C determine the maximum...
Heat Transfer Problem:
A sphere of pure aluminum weighing 6 kg and initially at a temperature of 300°C is cooled by an air stream at 20°C with a convection coefficient of 24 W/m2 C. Calculate the time required to cool the sphere center to 100°C.
Sphere is made of Silver. The air is still so Heat transfer
would be Free Convection
A sphere of silver of 30 mm diameter is cooling suspended in still air at room temperature of 27°C. If the initial temperature of the sphere is 127°C, what will be its center temperature after 15 minutes? Ignore the radiation effects
A sphere of silver of 30 mm diameter is cooling suspended in still air at room temperature of 27°C. If the initial temperature...
Al m diameter sphere is exposed to an en covered with a layer of insulation 2.5 cm thick whose thermal conductivity temperature of the sphere on the inside of the insulation is 315ºC. Assuming emissivity of 0.9, compute the value of the conve 's compute the value of the convection heat transfer coefficient that must be maintained on the outer surface of the insulation to ensure that the outer surface not exceed 41°C. exposed to an environmental temperature of 28°C....
One end of a long rod 3 cm in diameter is inserted into a furnace with the (3 outer end projecting into the outside air. Once the steady state is reached the temperature of the rod is measured at two points, 15 cm apart and found to be 140°C and 100°C, when the atmospheric air is at 30°C with convection coefficient of 20 W/m2.K. Calculate the thermal conductivity of *.the rod material Consider a stainless steel spoon(k = 15.1 W/m.K), partially...
3. A large, 5-cm thick plate of pure aluminum initially at a uniform temperature of 200°C is suddenly exposed to a convection environment in which the fluid temperature is 50°C and the heat- transfer coefficient is 1200 W/ m K. Calculate the temperature of the plate at a depth of 1.5 cm from one of the surfaces after 3 min. How much heat is lost from the plate during this time? Ans: Tplate = plane
Solve quickly and carry units please
rroblem I) A perfect sphere (Diameter-1 cm) of a gold alloy is placed in a special type o microwave oven. The sphere has a uniform initial temperature of 300 K. The microwave then turned on, which pr oduces u niform generation u-3,000,000 W/m2 within the sphere, and a fan produces convection heat transfer evenly over the surface of the sphere with convection coefficient h-6 W/m2 K and with air temperature Too- 300 K. Radiation...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
(1 point) A large cylinder with diameter D = 55 cm is at uniform temperature of T, = 450° C. A fan that blows air at temperature T㎡ = 25°C to cool the cylinder down. The convection coefficient is estimated to be h 110W/m2. K. The safe temperature for handling is Tsafe 55'C. The properties of the cylinder are p 2700 kg/m3,c975 J/kg.K and k 20 W/m.K. A conservative measure imposes that the entire object has to reach to the...
A) Determine the convection
heat transfer coefficient for the flow of air.
[W/m2·°C]
B) Determine the convection heat transfer coefficient for water.
[W/m2·°C]
The velocity of the fluid is 9 m/s in an 8-cm diameter and 7-m-long tube when the tube is subjected to uniform heat flux from all surfaces. Use fluid properties at 25°C. Water or Air D 8 cm L=7 m Given: The properties of air at 25°C are: k 0.02551 W/m."C v 1.562 10-5 m2/s Pr =...