Water is poured into a u-shaped tube that’s open on both ends. Oil (typical) is poured into one end until it reaches a height of 25 cm above the surface of the water. How much does the water rise on the other end of the tube from it’s original level?
considering the pressure balance
rho g h = ro' gh'
10^3 * h = 0.93 10^3* 25
h = 23.25 m
=========
Comment before rate in case any doubt, will reply for sure.. goodluck
Water is poured into a u-shaped tube that’s open on both ends. Oil (typical) is poured...
A U-shaped tube, open to the air on both ends, contains mercury. Water is poured into the left arm until the water column is 17.0 cm deep. Part A How far upward from its initial position does the mercury in the right arm rise?
A U-shaped tube, open to the air on both ends, contains mercury. Water is poured into the left arm until the water column is 16.1 cm deep. How far upward from its initial position does the mercury in the right arm rise? Express your answer using three significant figures. Give the answer in mm
A U-shaped tube, open to the air on both ends, contains mercury. Water is poured into the left arm until the water column is 11.3cm deep. How far upward from its initial position does the mercury in the right arm rise?(In mm)
A U-shaped tube open to the air at both ends contains some mercury. A quantity of water is carefully poured into the left arm of the U-shaped tube until the vertical height \(h_{W}\) of the water column is \(22.0 \mathrm{~cm}\) as shown in (Figure 1)
A U-shaped tube open to the air at both ends contains some mercury. A quantity of water is carefully poured into the left arm of the U-shaped tube until the vertical height of the water column is hW = 23.0 cm . What is the gauge pressure at the water-mercury interface? Express your answer in pascals. Calculate the vertical distance h from the top of the mercury in the right-hand arm of the tube to the top of the water...
A U-tube with a cross-sectional area of 1.00 cm2 is open to the atmosphere at both ends, Water is poured into the tube until the water rises part-way along the straight sides, and then 5.00 cm3 of oil is poured into one end. As a result, the top surface of the oil ends up 0.550 cm higher than the water surface on the other side of the U. What is the density of the oil?
A U-tube open at both ends is partially filled with water. Oil (p=750kg/m^3) is then poured into the right arm and forms a column L=5.00cm high. (a) Determine the difference h in the heights of the two liquid surfaces. (b) The right arm is then shielded from any air motion while air is blown across the top of the left arm until the surfaces of the two liquids are at the same height. Determine the speed of the air being...
A) A simple U-tube that is open at both ends is partially filled with a liquid of density 222 kg/m3. Water is then poured into one arm of the tube, forming a column 13 cm in height, as shown in the following diagram. The density of heavy liquid is 1000 kg/m3. What is the difference, h1, in the heights of the two liquid surfaces? Answer in units of cm. b) A simple U-tube that is open at both ends is...
Oil and water do not mix due to their incompatible molecular interactions. Imagine a U-shaped tube with a constant cross-sectional area of 1 cm2 that holds enough water (1000 kg/m3) that the level on each side is in the straight part of the tube (figure left). Now 11.4 mL of oil (700 kg/m3) is added and reaches equilibrium as shown. How high did the water level rise in cm?
A U-tube open at both ends is partially filled with water (see figure) (Pair 1.29 kg/m ) Oil having density 725 kg/m2 is then poured into the right arm and forms a column L = 5.58 cm high. Shield Po Water Oil a) Determine the difference h in heights of the two liquid surfaces. Number Units b)The right arm is then shielded from any air motion while air is blown across the top of the left arm until the surface...