Tomato pulp at 13.4*104 lb/h is flowing in a tube with cross sectional area of 10.12...
Tomato pulp at 13.4*104 lb/h is flowing in a tube with cross sectional area of 10.12 ft2. The viscosity and density of tomato pulp are 3*10-3 Nm-2s and 1890 kg/m3, respectively. Calculate the maximum velocity.
Homework Answers
I have solved the question
step by step and neatly so that you can understand the solution
easily and quickly. Please dear thumpsup for the work. Thank
you.
Add Answer to:
Tomato pulp at 13.4*104 lb/h is flowing in a tube with cross
sectional area of 10.12...
there is a velocity head flowing through a pipe with a calculated cross sectional area (6...
there is a velocity head flowing through a pipe with a calculated cross sectional area (6 inch schedule 460) If the pipe’s cross sectional area is doubled from calculated cross section to an unknown ft2 in, then calculate the velocity and velocity head. Note: acceleration due to gravity is 32 ft/s2
Part (a) The fluid has a density of 920 kg/m, and the tube has a cross-sectional...
Part (a)
The fluid has a density of 920 kg/m,
and the tube has a cross-sectional area that is much smaller than
the cross-sectional area of the higher container.
Calculate the speed at which the fluid flows out of the tube at
point Z.
_______ m/s
The fluid has a density of 920 kg/m,
and the tube has a cross-sectional area that is much smaller than
the cross-sectional area of the higher container.
Calculate the speed at which the fluid...
Water is flowing through a circular tube with a cross-sectional area 0.4m^2 at a rate of...
Water is flowing through a circular tube with a cross-sectional area 0.4m^2 at a rate of 8m/s. Step 1: the cross-section of the tube gradually decreases to 0.2m^2, Step 2: then the water shoots out upright from the tape (in the up vertical direction), and gains 4m in height. What is the new velocity of the water after it gains 4m in height? [save to 1 decimal places] Assume g=10m/s2; for step 1 and 2, the water is under the...
110 points] A U-tube of uniform cross-sectional area A is open both ends. It contains waterand...
110 points] A U-tube of uniform cross-sectional area A is open both ends. It contains waterand oil. The reference level y =0 the interface between the oil and water. The water surface is y at 50 mm above the reference level, and the oil surface is y2 65 mm above the reference level. What is the density of the oil? Oil 65 m 50 min Waler Density = kg / m3 2. [12 points] A 30-kg block is floating on...
A U-tube of uniform cross-sectional area and open to the atmosphere is partially filled with mercury....
A U-tube of uniform cross-sectional area and open to the atmosphere is partially filled with mercury. Water is then poured into both arms. If the equilibrium configuration of the tube is shown in the figure below, with h2 = 1.409 cm, determine the value of h1. The density of mercury is 13,600 kg/m^3.
A tube has a length of 1.7 cm and a cross-sectional area of 8.0 x 10-4...
A tube has a length of 1.7 cm and a cross-sectional area of 8.0 x 10-4 m2. The tube is filled with a solution of sugar in water. The diffusion constant of sugar in water is 5.0 x 10-10 m2/s. A difference in concentration of 3.5 x 10-3 kg/m3 is maintained between the ends of the tube. How much time is required for 9.0 x 10-13 kg of sugar to be transported though the tube in seconds?
1. Water is flowing in a pipe as shown in the figure. The diameter of the...
1. Water is flowing in a pipe as shown in the figure. The diameter of the cross section area A1 is twice the diameter of A2. The velocity of flow v1 is 2.00m/s while h and h2 are 5.00 cm and 30.0 cm, respectively. Take the density of water to be 1000. kg/m3 (a) Find v2 (b) Calculate the pressure difference P P2 between the two ends of the pipe 2
The maximum rated current for a copper wire of cross-sectional area 2 mm^2 is 20A. (a)...
The maximum rated current for a copper wire of cross-sectional
area 2 mm^2 is 20A. (a) What is the corresponding current density
in A/m^2? (b) On the assumption that each copper atom contributes
one conduction electron, calculate the electronic drift velocity
corresponding to this current density. (Avogadro's number =
6.02E10^23 atoms per mole; atomic weight of copper = 63.5; density
of copper = 8.92 g/cm^3.) (c) Use the observed conductivity to
calculate the average collision time for an electron in...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
A 2790 lb car has a frontal cross-sectional area A of 21.1 ft2, a drag coefficient...
A 2790 lb car has a frontal cross-sectional area A of 21.1 ft2, a drag coefficient Cd of 0.25, and a drive (or tractive) force of 280 lbs. Assume an air density of 2.3x10-3 slug/ft?, Here is a list of frontal areas and drag coefficients for cars. This web site has interesting information on how the physics we are learning is incorporated into video games with cars. NOTES IMAGES DISCUSS UNITS STATS HELP Part Description Answer chk History 11.11 pts....
Part (a)
The fluid has a density of 920 kg/m,
and the tube has a cross-sectional area that is much smaller than
the cross-sectional area of the higher container.
Calculate the speed at which the fluid flows out of the tube at
point Z.
_______ m/s
The fluid has a density of 920 kg/m,
and the tube has a cross-sectional area that is much smaller than
the cross-sectional area of the higher container.
Calculate the speed at which the fluid...
110 points] A U-tube of uniform cross-sectional area A is open both ends. It contains waterand oil. The reference level y =0 the interface between the oil and water. The water surface is y at 50 mm above the reference level, and the oil surface is y2 65 mm above the reference level. What is the density of the oil? Oil 65 m 50 min Waler Density = kg / m3 2. [12 points] A 30-kg block is floating on...
1. Water is flowing in a pipe as shown in the figure. The diameter of the cross section area A1 is twice the diameter of A2. The velocity of flow v1 is 2.00m/s while h and h2 are 5.00 cm and 30.0 cm, respectively. Take the density of water to be 1000. kg/m3 (a) Find v2 (b) Calculate the pressure difference P P2 between the two ends of the pipe 2
The maximum rated current for a copper wire of cross-sectional
area 2 mm^2 is 20A. (a) What is the corresponding current density
in A/m^2? (b) On the assumption that each copper atom contributes
one conduction electron, calculate the electronic drift velocity
corresponding to this current density. (Avogadro's number =
6.02E10^23 atoms per mole; atomic weight of copper = 63.5; density
of copper = 8.92 g/cm^3.) (c) Use the observed conductivity to
calculate the average collision time for an electron in...
A hot fluid passes through a thin-walled tube of 10-mm diameter at 18 kg/h at a temperature of 85 C. On the outside, coolant flows across the tube at a velocity of 3 m/s at a temperature of 25 C. Neglecting the thermal resistance of the metal wall, calculate 1. (a) The two heat transfer coefficients, (b) Overall heat transfer coefficient, and (c) Cooling rate (in W/m) achieved in the given configuration Assume hot fluid properties are constant at the...
A 2790 lb car has a frontal cross-sectional area A of 21.1 ft2, a drag coefficient Cd of 0.25, and a drive (or tractive) force of 280 lbs. Assume an air density of 2.3x10-3 slug/ft?, Here is a list of frontal areas and drag coefficients for cars. This web site has interesting information on how the physics we are learning is incorporated into video games with cars. NOTES IMAGES DISCUSS UNITS STATS HELP Part Description Answer chk History 11.11 pts....
Most questions answered within 3 hours.
-
PHP coding (please use mysqli instead of mysql)
Create an Admin Control Panel page for your...
asked 7 minutes ago -
Long term loans from commercial banks are usually readily
available to small start up firms T/F
asked 19 minutes ago -
From the perspective of a bank, a deposit is a (or an) Select
one: a. part...
asked 24 minutes ago -
Each of the statements below attempts to explain why some
periodic property varies predictably among elements...
asked 40 minutes ago -
Write balanced molecular, total ionic, and net ionic equations
for the reaction between aqueous solutions of...
asked 1 hour ago -
3. Parameters of an Example Wave Function
An electron that is not localized in space is...
asked 44 minutes ago -
Ahmed is standing stationary on ice holding a 6.00 kg bowling
ball. When he throws the...
asked 44 minutes ago -
On January 1, 2017, Waterway Corporation purchased 20% of the
common shares of Wildhorse Company for...
asked 38 minutes ago -
Java code about writing two methods:
public static String randomStringone(int length)
public static String randomStringtwo(int length)...
asked 40 minutes ago -
Which one of the following capacitances in series with a 100-Ω
resistor and 15-mH coil will...
asked 1 hour ago -
Sketch the circuit diagram for an inverting amplifier, and give
component values that will produce a...
asked 1 hour ago -
i need help with this c++ data structure question
Create a new implementation of Stack that...
asked 1 hour ago