An electric motor has an effective resistance of 34 Ω and an inductive reactance of 59 Ω when working under load. The voltage amplitude across the alternating source is 420V. Calculate the current amplitude. in A. Answer to three sig figs.
An electric motor has an effective resistance of 34 Ω and an inductive reactance of 59...
-An electric load consists of a 4Ω resistance, 6Ω inductive reactance and 9Ω capacitive reactance connected in series. The total impedance of the load is connected across a voltage source of 120 V: a) Compute the power factor of the load. Pf- b) Compute the source current c) Compute the real power of the circuit. d) Compute the reactive power of the circuit. Isource
A load impedance consists of 25 ohm resistance in series with 38 ohm inductive reactance. The load is connected across a 60 Hz, 240 V rms source. Use the voltage source as the reference (zero phase angle). a. Draw the circuit diagram. b. Calculate the value of inductance. c. Calculate the phasor value of current through the load impedance. d. Which leads, current or voltage? e. What is the phase angle between current and voltage? d. Calculate the phasor value...
A series RLC circuit has resistance R = 10.0 Ω, inductive reactance XL = 34.0 Ω, and capacitive reactance XC = 21.0 Ω. If the maximum voltage across the resistor is ΔVR = 165 V, find the maximum voltage across the inductor and the capacitor. (Due to the nature of this problem, do not use rounded intermediate values in your calculations—including answers submitted in WebAssign.) (a) the maximum voltage across the inductor (in V) V (b) the maximum voltage across...
An AC series circuit has 18.9-Ω resistance, 21.1-Ω inductive reactance, and 15.5-Ω capacitive reactance. If an effective (rms) emf of 94 V is applied, what is the power output?
Exercise 12 A three phase interconnector has resistance per conductor of 4 Ω per phase and an inductive reactance of 10 Ω per phase. When the load is adjusted such that the terminal voltage at both ends is 33 kV the power loss in the interconnector is 600 kW. Calculate the sending and receiving end powers and power factors. s (12.14-j3.987) MVA, (11.54- j5.487) MVA, pf0.9501 leading, pfg 0.9031 leading,
Exercise 12 A three phase interconnector has resistance per conductor...
An AC series circuit has 12.0 Ω resistance, 15.00 Ω inductive reactance and 10.00 Ω capacitive reactance. If an effective (rms) emf of 144 V is applied, what is the power dissipated by the resistor? A. 1728 W B. 1472 W C. 1595 W D. 1020 W
Please solve Q1.Thanks
PHY232: AC practice problems 1. The inductance and capacitance of the oscillatory circuit o f a radio station are 10 mH and 0.25 ?F wavelength of the transmitted waves (neglect resistance effect). respectively. Find the frequency and f A transformer with primary and seconda use velocity of light c-3 x10°m/s9.42 x10 m 2. ry voltage of 2000 volt and 200 volt takes a current 0.5 amp from the mains. Calculate the resistance connected across the secondary Primary...
When an inductor is connected to a 60.0 Hz source it has an inductive reactance of 54.6 Ω. Determine the maximum current in the inductor (in A) if it is connected to a 45.0 Hz source that produces a 105 V rms voltage.
A 4-pole, 60Hz, three-phase synchronous motor with a synchronous reactance of 0.5 Ω is working at half load with torque of 20 N-m. Assume ?? = 120∠00 ? (phase voltage). When working at the full load, the equivalent field voltage is Ef = 100 V (phase voltage). a) Draw the per-phase equivalent circuit and label the parameters (5 Points) b) Determine the power consumed by the half load (5 Points) c) Calculate the armature current and active power consumed, at full...
3. A 25-kW, 230-V shunt motor has an armature resistance of 0.064 Ω and a field-circuit resistance of 95 Ω. The motor delivers rated output power at rated voltage when its armature current is 122 A. When the motor is operating at rated voltage, the speed is observed to be 1150 r/min when the machine is loaded such that the armature current is 69.5 A a. Calculate the rated-load speed of this motor In order to protect both the motor...