
The tank shown in the figure below contains air at atmospheric pressure above the water surface....
8. The figure shows a tank within a tank, each containing air. Pressure gage A, which indicates pressure inside tank A, is located inside tank B and reads 5 psig (vacuum). The U-tube Pa 14.7 psia Tank B manometer connected to tank B contains water with a column length of 10 in. Using the data shown on the figure, determine the absolute pressure of the air inside tank B and inside tank A, both in psia. The atmospheric pressure surrounding...
Water is siphoned from a large tank and discharges into the
atmosphere through a 2-in.-diameter tube as shown in the figure
below. The end of the tube is 3 ft below the tank bottom, and
viscous effects are negligible. Determine the volume flowrate from
the tank. Determine the maximum height, H, over which the water can
be siphoned without cavitation occurring. Atmospheric pressure is
14.7 psia, and the water vapor pressure is 0.26 psia
A centrifugal pump is placed above a reservoir as shown below. If the NPSHR is 17 ft and the flow rate is 32 ft3/s, determine the maximum height, 21, that the pump can be located above the reservoir surface without cavitation. Assume that the total head loss between the tank and pump inlet is 10 ft. The diameter of the pipe on the suction side of the pump is 12 inches. The reservoir surface is at atmospheric pressure, Patm =...
Water at 60°F flows from a large tank as shown in the figure below. Atmospheric pressure is indicated by the mercury barometer, where H is 30”. If viscous effects are neglected, at what height, h, of water in the tank will cavitation begin? Dz = 4 in. 1 De = 1 in. 1 De='2 in. Figure 3.83 John Way & Sons, Inc. All these
Process Design & Control
Consider the process of filling a tank with compressed
air from a constant pressure supply.
Consider the process of filling a tank with compressed air from a constant pressure supply The tank has a volume of 500 ft' and initially is at atmospheric pressure and 75°F. The tank is connected to a high pressure air line that contains a control valve. The valve is quickly opened when the filling process begins, and the flow rate of...
A pressurized water tank contains water with a mass density of 62.1 lbm/ft3. The water depth is 10 feet (above ground level) and the tank is pressurized to 28 psia. The tank outlet at ground level is a 4 inch diameter pipe with a closed valve. Atmospheric pressure is at 14.5 psia. If the valve on the 4 inch pipe is opened all the way what will be the initial water flow rate out of the pipe in ft3/s?
Question 2 Water is draining from a pressurized tank as shown in the figure. The exit velocity is given by Ve=(2p/p+2gh)1/2 where p is the pressure in the tank, p is the water density, and h is the elevation of the water surface above the outlet. Constant pressure supply Control surface Exit e The depth of the water in the tank is 1.7 m. The tank has a cross-sectional area of 1.8 m2, and the exit area of the pipe...
Tank shown below with orifice 2 inches in diameter located on the side of the tank. a. Determine total energy at the liquid surface in ft. consider orifice as datum. Air: p = 20 lbf/in-abs P. = 14.7 lbf/in2 abs
what is the gage pressure of air in the tank?
Salt Water SG 1.025 P 14.1 psia atm apen Gasoline, SG 0.7 Air Gasoline, , SG 0.7 Water, 62.3 lbm/ft Ul uI 6