The resistivity of gold is 2.44 x 10-80 mat a temperature of 20°C. A gold wire,...
The resistivity of gold is 2.44 x 10-8 ohms.m at room temperature. A gold wire that is 0.9 mm in diameter and 14 cm long carries a current of 940 mA. What is the electric field in the wire? Answer 0.090 V/m 0.028 V/m 0.046 V/m 0.0090 V/m 0.036 V/m
The resistance of gold is 2.8 ×
? at a temperature of 20°C. A gold wire, 1.8 mm in diameter and 14
cm long, carries a current of 600 mA. The power dissipated in the
wire is closest to:
A) 33 mW
B) 1.0 mW
C) 1.7 mW
D) 1.8 mW
E) 55 mW
11. The resistivity of gold is 2.H 10-50 mat room temperature. A gold wire that is 0.9 mm in diameter and 14 cm long carries a current of 940 mA. What is the electric field in the wire? hwina n of 4.00.600 and 100 are connected in parallel. If the combination is
Thanks to anyone that helps!
Will rate answer.
3. The resistivity of gold is 2.44 x10^-8 ohm.m at room temperature. A gold wire that is 0.9 mm in diameter and 14 cm long carries a current of 940 mA. What is the electric field in the wire9 A) 0.036 V/m B) 0.0090 V/m C) 0.028 V/m D) 0.046 V/m E) 0.090 V/m
1) The density of free electrons in gold is 5.90 x 1028 m-3. The resistivity of gold is 2.44* x 10-80 m at a temperature of 20°C and the temperature coefficient of resistivity is 0.004 (°C)-1. A gold wire, 1.1 mm in diameter and 26 cm long, carries a current of 760 ma. The drift velocity of the electrons in the wire is closest to: A) 1.1 x 10-4 m/s B) 8.5 x 10-5 m/s 09 9.7 x 10-5 m/s...
A thin gold wire (resistivity 2.44×10−8Ωm) with a diameter of 2.05mm and a length of 60m is connected to a small voltage source. When connected, a current of 10A flows through the wire. a) What is the voltage supplied by the voltage source? b) If we replace the gold wire with a platinum wire (resistivity 1.06×10−7Ωm) that has the same diameter and length, what would the current through the platinum wire be?
An 80 cm long wire is made by welding a 1.8 mm diameter, 20 cm long copper wire to a 1.8 mm diameter, 60 cm long iron wire at normal room temperature (20 ∘C). When two wires are connected end to end, their resistances add together. The resistivity of copper is 1.68×10−8Ωm and the of iron is 1.00×10−7Ωm. The temperature coefficients are: copper = 0.0039/∘C and iron = 0.0050/∘C. What is the resistance of the iron section of wire?
An 80 cm long wire is made by welding a 1.8 mm diameter, 20 cm long copper wire to a 1.8 mm diameter, 60 cm long iron wire at normal room temperature (20 ∘C). When two wires are connected end to end, their resistances add together. The resistivity of copper is 1.68×10−8Ωm and the of iron is 1.00×10−7Ωm. The temperature coefficients are: copper = 0.0039/∘C and iron = 0.0050/∘C. What is the resistance of the copper section of wire?
Learning Goal: Examine the dependence of resistivity and resistance of a wire on temperature and how it affects the potential difference across the terminals of the wire. Introduction: A current of 65 milli-amperes (mA) flows through a wire of length L= 1.7 meters long and diameter of d= 1.15 millimeters at a temperature of T0= 20 °C; the wire's resistivity at this temperature is ρ0= 5.33×10−8 Ω ∙ m. The temperature coefficient of resistivity of the material is α= 4.6×10−3/C°....
Copper wire has a resistivity ρ = 1.7 × 10-8 Ω⋅m when at 20°C and it has a temperature coefficient α = 3.9 × 10-3 K-1. A solid cylinder of copper of length L = 85 cm and diameter D = 2.5 mm has one end held at T1 = 7°C and the other end is held at T2 = 210°C. The temperature increases linearly between the two ends of the cylinder. Given that T= T1 + ( x/L )...