A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence series impedance ?=0.08+?0.48 Ω/km and a positive-sequence...
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence
series impedance ?=0.08+?0.48 Ω/km and a positive-sequence shunt
admittance ?=?3.33×10−6 S/km. At full load, the line delivers 250
MW at 0.99 pf lagging and at 220 kV. Using the nominal ? circuit,
calculate:
a. The ABCD parameters,
b. The sending-end voltage and current,
c. The percent voltage regulation.
Homework Answers
Add Answer to:
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence
series impedance ?=0.08+?0.48 Ω/km and a positive-sequence...
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4...
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4 x 10-6 S/ impedance z - j0.35 ohm/km and a positive-sequence shunt admittance y km. If at full load, the line delivers 700 MW at unity power factor and at 475 kV, Calculate The nominal voltage level for this line a) the exact ABCD parameters for this line, the sending- end voltagnb transferred, and max theoretical power that can be transferred, and c) d)...
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2...
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2 per km and a per phase shunt admittance ofy = j3.4 x 10-6 siemens per km. The line is 80 km long. Using the nominal r model, determine (a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers (b) 200 MVA, 0.8 lagging power factor at 220...
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the...
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the ABCD parameters (a) 20% (b)A 200 km, 230 kV, 50 Hz three-phase overhead transmission line has a positive-sequence series impedance z (0.08 + j0.48) Ω/km, and a positive-sequence shunt admittance y-j3.33 x 10T° S/km. At full load, the line delivers 250 MW at 0.99 power factor lagging...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase ...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z...
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z =j 0.38.2/km and a shunt admittance y =j 4.0 x 10-6S/km. Line losses are neglected. a. Calculate the line's characteristic impedance Zc, the propagation constant y and the exact ABCD parameters of the line... b. Calculate the surge impedance loading (SIL) in MW and the maximum power that the line can deliver at rated voltage C. At full load the line delivers 1000 M...
2) A 50 Hz transmission line 300 km long has a series impedance of 40 j125...
2) A 50 Hz transmission line 300 km long has a series impedance of 40 j125 ohms and a total shunt admittance of 103 S. The load draws 500 MW at 220 kV with 0.8 pf lagging. Find the sending end voltage using (a) Short line approximation and (b) Nominal π method.
A 132 kV, 55 MVA, 60 Hz, three-phase, power transmission line is 100 km (62. 1...
A 132 kV, 55 MVA, 60 Hz, three-phase, power transmission line is 100 km (62. 1 mi) long, and has the following characteristics: r = 0.25 Ω/km x = 0.5 Ω/km y = j*S/km What is the per phase total series impedance and shunt admittance of the line? Should the line be modeled as a short, medium or long line? Calculate the ABCD constants of the line. Calculate the sending end voltage and current if the line is supplying rated...
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of...
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of 23 + j75 Ohms and a shunt admittance of j500 µS. It delivers 50 MW at 220 kV, with a power factor of 0.88 lagging. Find the voltage at the sending end using: 1) the short line approximation. 2) the medium-length approximation. 3) the long line equation. How accurate are the short- and medium-length approximations for this case?
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω...
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
A 345 kV, three phase transmission line is 130 km long. The series impedance is z...
A 345 kV, three phase transmission line is 130 km long. The series impedance is z = 0.036 + j0.3 Ω per phase/km and the shunt admittance is y = j4.22 x 10-6 S per phase/km. The sending end voltage is 345 kV and the sending end current is 400 A at 0.95 power factor lagging. Find the voltage, current and power at the receiving end and the voltage regulation.
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4 x 10-6 S/ impedance z - j0.35 ohm/km and a positive-sequence shunt admittance y km. If at full load, the line delivers 700 MW at unity power factor and at 475 kV, Calculate The nominal voltage level for this line a) the exact ABCD parameters for this line, the sending- end voltagnb transferred, and max theoretical power that can be transferred, and c) d)...
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2 per km and a per phase shunt admittance ofy = j3.4 x 10-6 siemens per km. The line is 80 km long. Using the nominal r model, determine (a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers (b) 200 MVA, 0.8 lagging power factor at 220...
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the ABCD parameters (a) 20% (b)A 200 km, 230 kV, 50 Hz three-phase overhead transmission line has a positive-sequence series impedance z (0.08 + j0.48) Ω/km, and a positive-sequence shunt admittance y-j3.33 x 10T° S/km. At full load, the line delivers 250 MW at 0.99 power factor lagging...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z =j 0.38.2/km and a shunt admittance y =j 4.0 x 10-6S/km. Line losses are neglected. a. Calculate the line's characteristic impedance Zc, the propagation constant y and the exact ABCD parameters of the line... b. Calculate the surge impedance loading (SIL) in MW and the maximum power that the line can deliver at rated voltage C. At full load the line delivers 1000 M...
2) A 50 Hz transmission line 300 km long has a series impedance of 40 j125 ohms and a total shunt admittance of 103 S. The load draws 500 MW at 220 kV with 0.8 pf lagging. Find the sending end voltage using (a) Short line approximation and (b) Nominal π method.
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
Most questions answered within 3 hours.
-
what are some strategic tools that can improve microsoft's
competitive advantage?
asked 9 minutes ago -
A mass M is suspended from a spring and oscillates with a period
of 0.960 s....
asked 7 minutes ago -
How to determine number of structural isomers?
I need a rule please.
asked 8 minutes ago -
What aspect of the cap's structure on eukaryotic RNA makes it
less susceptible to exonucleases than...
asked 18 minutes ago -
Instructions: Place these Linnaean classifications in order
from the most inclusive to the least inclusive. 1-7...
asked 25 minutes ago -
This week you're going to be discussing the goals, values and
principles of psychiatric rehabilitation.
How...
asked 38 minutes ago -
Jack is paid to endorse products and services on his blog. The
FTC requires him to...
asked 43 minutes ago -
A picture window has dimensions of 1.40 m×2.50 m and is made of
glass 5.30 mm...
asked 44 minutes ago -
How does biomedicine differ from traditional
medicine?
What are the 3 causes of disease in
biomedicine?...
asked 45 minutes ago -
1. On December 31 of the current year, the unadjusted trial
balance of a company using...
asked 56 minutes ago -
Are the E. coli BL2I thermophiles? If not, explain how can it be
transformed to be...
asked 1 hour ago -
The pH of stomach acid is typically found to be around 1.50
(give or take). HCl...
asked 1 hour ago