Homework Answers
Add Answer to:
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2...
A 230kV three phase transmission line has a per phase series impedance of z=0.05+j0.45ohms per km...
A 230kV three phase transmission line has a per phase series impedance of z=0.05+j0.45ohms per km and a per phase shunt admittance of y= j3.4x10^-6 siemens per km. The line is 80km long. Using the medium line pi model: (a) Determine the transmission line model constants A, B, C, and D (b) Find the sending end (generating) voltage, current and power when the line delivers to a load of 1. 200 MVA with 0.8 lagging power factor at 220 kV...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase ...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
QUESTIONS 1- A 69-kV, three-phase transmission line is 20 km long. The line has a per...
QUESTIONS 1- A 69-kV, three-phase transmission line is 20 km long. The line has a per phase series impedance of 0,120 + 10,4325 per km. Detemine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 60 MVA, 0.8 lagging power factor at 60 kV. (b) 110 MW, unity power factor at 60 kV
A 345 kV, three phase transmission line is 130 km long. The series impedance is z...
A 345 kV, three phase transmission line is 130 km long. The series impedance is z = 0.036 + j0.3 Ω per phase/km and the shunt admittance is y = j4.22 x 10-6 S per phase/km. The sending end voltage is 345 kV and the sending end current is 400 A at 0.95 power factor lagging. Find the voltage, current and power at the receiving end and the voltage regulation.
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence series impedance ?=0.08+?0.48 Ω/km and a positive-sequence...
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence
series impedance ?=0.08+?0.48 Ω/km and a positive-sequence shunt
admittance ?=?3.33×10−6 S/km. At full load, the line delivers 250
MW at 0.99 pf lagging and at 220 kV. Using the nominal ? circuit,
calculate:
a. The ABCD parameters,
b. The sending-end voltage and current,
c. The percent voltage regulation.
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the...
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the ABCD parameters (a) 20% (b)A 200 km, 230 kV, 50 Hz three-phase overhead transmission line has a positive-sequence series impedance z (0.08 + j0.48) Ω/km, and a positive-sequence shunt admittance y-j3.33 x 10T° S/km. At full load, the line delivers 250 MW at 0.99 power factor lagging...
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω...
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z...
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z =j 0.38.2/km and a shunt admittance y =j 4.0 x 10-6S/km. Line losses are neglected. a. Calculate the line's characteristic impedance Zc, the propagation constant y and the exact ABCD parameters of the line... b. Calculate the surge impedance loading (SIL) in MW and the maximum power that the line can deliver at rated voltage C. At full load the line delivers 1000 M...
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of...
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of 23 + j75 Ohms and a shunt admittance of j500 µS. It delivers 50 MW at 220 kV, with a power factor of 0.88 lagging. Find the voltage at the sending end using: 1) the short line approximation. 2) the medium-length approximation. 3) the long line equation. How accurate are the short- and medium-length approximations for this case?
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4...
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4 x 10-6 S/ impedance z - j0.35 ohm/km and a positive-sequence shunt admittance y km. If at full load, the line delivers 700 MW at unity power factor and at 475 kV, Calculate The nominal voltage level for this line a) the exact ABCD parameters for this line, the sending- end voltagnb transferred, and max theoretical power that can be transferred, and c) d)...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
QUESTIONS 1- A 69-kV, three-phase transmission line is 20 km long. The line has a per phase series impedance of 0,120 + 10,4325 per km. Detemine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 60 MVA, 0.8 lagging power factor at 60 kV. (b) 110 MW, unity power factor at 60 kV
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence
series impedance ?=0.08+?0.48 Ω/km and a positive-sequence shunt
admittance ?=?3.33×10−6 S/km. At full load, the line delivers 250
MW at 0.99 pf lagging and at 220 kV. Using the nominal ? circuit,
calculate:
a. The ABCD parameters,
b. The sending-end voltage and current,
c. The percent voltage regulation.
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the ABCD parameters (a) 20% (b)A 200 km, 230 kV, 50 Hz three-phase overhead transmission line has a positive-sequence series impedance z (0.08 + j0.48) Ω/km, and a positive-sequence shunt admittance y-j3.33 x 10T° S/km. At full load, the line delivers 250 MW at 0.99 power factor lagging...
A three-phase transmission line is 200 km long. lt has a total series impedance of 25+j110)Ω Per Phase and a total shunt admittance ofj5x 10 Ω. It delivers 180 MW at 275 kV and 0.8 power factor lagging to a load connected at the receiving end. Using the medium π model of the line, determine the voltage, current, real power, reactive power and power factor at the sending end of the line.
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z =j 0.38.2/km and a shunt admittance y =j 4.0 x 10-6S/km. Line losses are neglected. a. Calculate the line's characteristic impedance Zc, the propagation constant y and the exact ABCD parameters of the line... b. Calculate the surge impedance loading (SIL) in MW and the maximum power that the line can deliver at rated voltage C. At full load the line delivers 1000 M...
[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4 x 10-6 S/ impedance z - j0.35 ohm/km and a positive-sequence shunt admittance y km. If at full load, the line delivers 700 MW at unity power factor and at 475 kV, Calculate The nominal voltage level for this line a) the exact ABCD parameters for this line, the sending- end voltagnb transferred, and max theoretical power that can be transferred, and c) d)...
Most questions answered within 3 hours.
-
Write the complete mechanism for the reaction of
2-Methyl-2-butanol with H3PO4 to produce 2-Methyl-2-butene.
asked 1 hour ago -
Consider the reaction A −−→ 2 B. Initially, 1.50 mol A is
present and no B....
asked 1 hour ago -
A tennis match is played where the winner must win 3 sets to win
the match....
asked 3 hours ago -
Please write the hypothesis for the scenario below :
1) Let’s say a student wants to...
asked 5 hours ago -
Speculate on appearance of the C13 NMR spectrum of each of the
possible dialkylated products of...
asked 4 hours ago -
Which of these is NOT a reason to use IS as a competitive
advantage?
IS can...
asked 5 hours ago -
Show an Finite State Machine (deterministic or nondeterministic)
that accepts L={ω∈a,b,c*: ω
contains at least one...
asked 7 hours ago -
Describe the three types of financial statement analysis. How do
you do them? What do they...
asked 7 hours ago -
The ordinary least squares method of estimation minimizes the
estimated slope and intercept.
True or False?
asked 7 hours ago -
Billiard ball 1 is moving in the positive direction at a speed
of 3.00 m/s, and...
asked 7 hours ago -
Suppose you have two masses, M and m, separated by a distance R.
Suppose you made...
asked 7 hours ago -
Major principles of health care ethics include the principles
of respect for autonomy, nonmaleficence, beneficence, and...
asked 8 hours ago