Thin walled pressure vessels
A pressurised cylindrical container has a sealed cover plate fastened with steel bolts as shown below. The internal pressure p in the thin cylinder is 1900 kPa, the inside diameter D of the cylinder is 250 mm and the diameter db of the bolts is 12 mm.
1. If the allowable tensile stress in the bolts is 70 MPa, find the number of bolts needed to fasten the cover plate.
2. If the diametral change of the cylinder shell is limited to 0,025mm, determine the thickness of the shell plate required. (ESteel = 200 GPa)
From the range of sizes given below select the minimum standard thickness of plate to be purchased for the manufacture of the cylinder.
8mm; 10mm; 12mm; 16mm; 20mm; 25mm; 30mm; 35mm
Homework Answers
Request Answer!
We need at least 9 more requests to produce the answer.
1 / 10 have requested this problem solution
The more requests, the faster the answer.
Thin walled pressure vessels
A spherical pressure vessel is constructed by bolting two hemispheres together along rigid flanges as shown in the sketch. The sphere has an internal diameter of 1.5 m and the plate thickness is 5 mm. Allowable tensile stresses are 45 MPa in the shell and 80 MPa in the bolts. 1. Calculate the allowable gauge pressure. 2. Determine the number of bolts required if the bolt diameter is 25 mm (Note: bolt root diameter = 0.84 × nominal bolt diameter) A thin...
MEE2001/2015 Q5. A thin walled steel cylinder with 10 mm wall thickness and internal diameter of 200 mm (Fig. Q5) is subjected to an internal pressure, p. The steel used for the cylinder has a yie...
MEE2001/2015 Q5. A thin walled steel cylinder with 10 mm wall thickness and internal diameter of 200 mm (Fig. Q5) is subjected to an internal pressure, p. The steel used for the cylinder has a yield stress of 240 MPa. +F 200 mm Fig. Q5 (a) If a tensile axial force of 1MN is applied to the end plate, show that the maximum internal pressure that can be applied before the cylinder yields according to the Tresca criterion is 16.2...
thin walled pressure vessel Thin walled pressure vessel rectangular prism- Word Help Tell me what you...
thin walled pressure vessel
Thin walled pressure vessel rectangular prism- Word Help Tell me what you want to do ew 1 Norma No Spac. Heading 1 Heading2e Subtitle Suble Em.. Emphasis Intense E... Strong Styles Thin walled pressure vessel rectangular prism An APU battery explodes on a plane with a maximum pressure of 10.9MPa being produced. Aluminium alloy 6061 T6 is used (yield strength 276 MPa, Ultimate tensile strength 310MPa) as its casing to contain the blast. What should be...
AY 2 019 SUNDAY MONDAY TUESDAY WED PART1 Strength of Materials for Technicians 4th Edition 50 33 A steam boiler is to have a 300 mm diameter hand hole placed on one end. If the internal pressure i...
AY 2 019 SUNDAY MONDAY TUESDAY WED PART1 Strength of Materials for Technicians 4th Edition 50 33 A steam boiler is to have a 300 mm diameter hand hole placed on one end. If the internal pressure is to be 1,3 MPa, how many 15 mm bolts will be required to keep the cover ie in position? The root diameter of a 15 mm bolt is 12 mm. The allowable tensile stress in the bh is 100 MPa and the...
Prob #4 A cylindrical thank is designed to withstand an internal pressure of3 MPa. The tank...
Prob #4 A cylindrical thank is designed to withstand an internal pressure of3 MPa. The tank has an inner diameter of 4 m and the wall thickness is 40 mm. The tank is fabricated by bolting together (on both sides of the vssel) two half-cylindrical longitudinal thin shell sections as shown. The diameter of the bolts is 25mm and the bolts are made from a material with allowable stress of 250 MPa 18. The hoop stress sustained by the tank...
Online Homework 2 Thin-walled Vessel Design due to Internal and External Pressure INSTRUCTIONS: Solve the following...
Online Homework 2 Thin-walled Vessel Design due to Internal and External Pressure INSTRUCTIONS: Solve the following problems. Show pertinent solutions. A. A horizontal, cylindrical tank, with hemispherical ends, is used to store liquid chlorine at 10 bar. The vessel is 4m internal diameter and 20m long. Estimate the minimum wall thickness required to resist this pressure, for the cylindrical section and the heads. Take the design pressure as 12 bar and the maximum allowable stress for the material as 110MN/m2....
MEE2001/2015 Q5. A thin walled steel cylinder with 10 mm wall thickness and internal diameter of 200 mm (Fig. Q5) is subjected to an internal pressure, p. The steel used for the cylinder has a yield stress of 240 MPa. +F 200 mm Fig. Q5 (a) If a tensile axial force of 1MN is applied to the end plate, show that the maximum internal pressure that can be applied before the cylinder yields according to the Tresca criterion is 16.2...
thin walled pressure vessel
Thin walled pressure vessel rectangular prism- Word Help Tell me what you want to do ew 1 Norma No Spac. Heading 1 Heading2e Subtitle Suble Em.. Emphasis Intense E... Strong Styles Thin walled pressure vessel rectangular prism An APU battery explodes on a plane with a maximum pressure of 10.9MPa being produced. Aluminium alloy 6061 T6 is used (yield strength 276 MPa, Ultimate tensile strength 310MPa) as its casing to contain the blast. What should be...
AY 2 019 SUNDAY MONDAY TUESDAY WED PART1 Strength of Materials for Technicians 4th Edition 50 33 A steam boiler is to have a 300 mm diameter hand hole placed on one end. If the internal pressure is to be 1,3 MPa, how many 15 mm bolts will be required to keep the cover ie in position? The root diameter of a 15 mm bolt is 12 mm. The allowable tensile stress in the bh is 100 MPa and the...
Prob #4 A cylindrical thank is designed to withstand an internal pressure of3 MPa. The tank has an inner diameter of 4 m and the wall thickness is 40 mm. The tank is fabricated by bolting together (on both sides of the vssel) two half-cylindrical longitudinal thin shell sections as shown. The diameter of the bolts is 25mm and the bolts are made from a material with allowable stress of 250 MPa 18. The hoop stress sustained by the tank...
Online Homework 2 Thin-walled Vessel Design due to Internal and External Pressure INSTRUCTIONS: Solve the following problems. Show pertinent solutions. A. A horizontal, cylindrical tank, with hemispherical ends, is used to store liquid chlorine at 10 bar. The vessel is 4m internal diameter and 20m long. Estimate the minimum wall thickness required to resist this pressure, for the cylindrical section and the heads. Take the design pressure as 12 bar and the maximum allowable stress for the material as 110MN/m2....
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago