An AC source whose rms voltage
is 83 V is in series with a 65 ? resistor and a capacitor whose
reactance Xc is 249 ? at the frequency of the source. In the
figure, the rms voltage (as a whole number) across the capacitor
is:
Z = 65 - j249
|Z| = sqrt [65*2 + 249^2] = 257.3 Ohms
I = 83/|Z| = 0.323A
Vz = 0.323*249 = 80.43 V
An AC source with an output rms voltage of 36 V at a frequency of 60 Hz is connected across a 12 µF capacitor. Find (a) the capacitive reactance, (b) the rms current, and (c) the maximum current in the circuit.
5. A resistor and capacitor are connected in series with an applied AC voltage source. There is no inductor. Separate voltmeter readings across the resistor and capacitor give values of 50 V and 75 V (rms) respectively. What is the (rms) voltage of the source? (5 points)
QUESTION 29 An RLC circuit consists of an alternating voltage source with RMS voltage 130 V and frequency 65 Hz, a 90 Ohm resistor, a 130 mH inductor, and a 200 micro-F capacitor, all wired in series. a) What is the inductive reactance of the circuit? b) What is the capacitive reactance of the circuit? c) What is the impedance of the circuit? d) What is the RMS current in the circuit? e) If the frequency is adjustable, what frequency...
A series LRC circuit is driven by an alternating source with rms voltage 700 V and angular frequency 500 rad/s. The circuit elements are a 400 Ω resistor, a 4.0 μF capacitor and a 0.40 H inductor. If the resistor and inductor are side by side, what would be the rms voltage across the two elements?
An AC source has an output rms voltage of 78 V at a frequency of 80 Hz. If the source is connected across a 25mH inductor, what are (a) the inductive reactance of the circuit, (b) the rms current in the circuit and (c) the maximum current in the circuit?
An AC source has an output rms voltage of 71.0 V at a frequency of 41.5 Hz. The source is connected across a 25.5-mH inductor. (a) Find the inductive reactance of the circuit. (b) Find the rms current in the circuit. (c) Find the maximum current in the circuit.
Problem 3: (20 points) When a DC source is connected to a series RC cireuit the time constant is 15.0 ms. When an 18.0 V RMS AC source is connected to the same series RC circuit you measure 3.17 V RMS across the capacitor a) (3 points) What is the resistor voltage? c) (5 points) What is the frequency of the source? If the resistor is 750.0 Q, what is the value of C? d) (6 points) An inductor is...
An AC generator supplies an rms voltage of 120 V at 60.0 Hz. It is connected in series with a 0.450 H inductor, a 5.4 uF capacitor and a 351 ohm resistor. What is the impedance of the circuit? What is the rms current through the resistor? What is the average power dissipated in the circuit? What is the peak current through the resistor? What is the peak voltage across the inductor? What is the peak voltage across the capacitor?...
An AC generator supplies an rms voltage of 115 V at 60.0 Hz. It is connected in series with a 0.450 H inductor, a 3.20 μF capacitor and a 396 Ω resistor. What is the impedance of the circuit? 7.69×102 ohm You are correct. Previous Tries What is the rms current through the resistor? 1.50×10-1 A You are correct. Previous Tries What is the average power dissipated in the circuit? Power is only dissipated in a resistor. Thus, you have...
An RLC circuit consists of an alternating voltage source with RMS voltage 90 V and frequency 100 Hz, 180 ohm resistor, 200mH inductor, and a 900 micro-F capacitor, all wired in series. A) What is inductive reactance of the circuit? B) What is the capacitive reactance of the circuit?C) What is the impedance of the circuit? D)What is RMS current in the circuit?E) If the frequency is adjustable what frequency should you use to maximize the current in the circuit?