A three phase SCIG system is feeding the utility grid at 460Vrms (line voltage), 60Hz. P = 6, Wm = 50pi, Rs = 0.4 ohms/phase, Xs = 0.8 ohms/phase, Rr = 0.35 ohms/phase, Xr = 0.85 ohms/phase. Find:
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
A three phase SCIG system is feeding the utility grid at 460Vrms (line voltage), 60Hz. P...
Question 1: Consider a 3 phase hydropower generator feeding power into the grid bus, which is held at line voltage of 26kV. The internal reactance is 0.8pu for a rated power of 30MVA. (a) Choose as base value So.3-30MVA and Vo.Lu-26k V and calculate the per-unit (b) Assume the generator initially runs overexcited with E-1.3 pu and a real power values for the power and grid voltage output of Pe 0.32pu. Compute the reactive power and the apparent power output...
A three-phase feeder has line voltage of 13.8 kV and supplies load of 7000 kVA at power factor of 0.8 lagging. Find: The feeder current in A, real power in kW and Reactive power in kVAr. The capacitor size in kVAr to improve the power factor to 0.98. The feeder power in kW and kVA and current in A, after installing the capacitor bank.
. A three-phase, 460V, 60Hz, 4 – pole Y – connected induction motor has the following equivalent circuit parameters: Rs = 0.42Ω, Rr ′ = 0.23Ω, Xs = Xr ′ =0.82Ω, and Xm = 22Ω. The no load loss Ploss = 60W, assumed as a constant. The rotor speed is 1750 rpm.Use the approximate equivalent circuit ( i.e. the Xm branch is at the very left of the circuit) determine the followinga. the synchronous speedb. the slip sc. the input...
Question 5 (Svnchronous machines) a. A synchronous generator connected to an infinite grid has its frequency and terminal b. A six-pole, Y-connected three-phase synchronous machine rated 208 V (line-to- voltage fixed. What is the effect of increasing the excitation current in this case? line), 5500 VA has a synchronous reactance of 8 2 per phase at rated terminal voltage. It is operating as a generator connected to an infinite grid Determine the excitation voltage and the power angle if the...
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
A three-phase synchronous generator with rated data VM = 20 kV, SM = 100 MVA, n = 500 rpm is driven by a turbine that can provide a maximum of 1.6 MNm. Synchronous reactance, XS = 3Ω / phase. The armature resistance (Ra ) is neglected. In open circuit mode (P = 0), an excitation current of 300 A is required to obtain rated voltage (VM ). The machine should be phased into a strong grid, 3x20 kV, 50 Hz....
Example 1-3 The nominal RMS line-line voltage at bus in a three phase system from a wind farm is 230kV when it is supplying a load of P +jQ=1600MW +j800Mvar. The single line equivalent AC system impedance seen by the bus can be approximated to be purely inductive with Z =j5.0 ohms. Calculate the percentage change in the bus voltage magnitude for a 15 % increase in active power Calculate the percentage in bus voltage for magnitude for a...
I want to solve this problem step by step. Thanks
(35 points) Induction Generator Real Power Generation. A three phase, 220V line to line, six pole, 60Hz, wye connected induction machine operates at rated voltage as a generator at a slip of-0.04. Its equivalent circuit parameters are the same as those in problem #1. The input mechanical power at the rotor (this is a generatorl) is 5.2kW. The core losses are 200Watts; friction and windage losses are 17 Watts; treat...
Figure 1 Single line diagram b2 b3 b1 b4 grid Τι 13 A power system single line diagram is shown in Figure 1. The single line diagram shows a synchronous generator G connected to a large 50 Hz grid via its unit transformer T and a network of three transmission lines. Relevant details of the grid, transformer, generator and overhead lines are provided in Tables I,II,II & IV respectively. A double line to ground fault occurs at bus 3 Questions....