Question 25
A balanced 3-phase Y-connected power supplies an office building
through a
four-wire distribution. The circuit operates at 60 Hz. The voltage
at the source is such that ?
is taken in
reference value and its value is 380 V in rms value and phase
sequence ABC (positive). All the
distribution line conductors are of the same material and have
equal cross-sections.
Considering the length of the line and the characteristics of the
electrical cables, the impedances
neutral conductors and the phase conductors are equal to 0.01 Ω
with reactances negligible at 60
Hz. The Y-balanced balanced load corresponds per phase to a
resistance of 1.45 Ω in series with a
inductance of 2.65 ??. Determine: a) the currents in the lines; b)
the voltage in the phase of the Y-bonded load;
c) the active power required by the load; d) the reactive power
required by the load; e) the power
dissipated in the line; f) the reactive power of the capacitors
connected in Y to correct the
load power for 0.92 inductive; g) the power dissipated in the line,
considering the correction of the PF.
Question 25 A balanced 3-phase Y-connected power supplies an office building through a four-wire distribution. The...
2) The reactive power of the balanced Y-Y connected three phase system depicted below is to be compensated by adding shunt capacitors. The network frequency is known as 50 Hz. The load resistances are R 330ΣΩ and the load inductances are L H. The phasor of the voltage for R phase is given as V 220/2 Volts. a) Find the followings before connecting the power factor compensation capacitors: i) The effective values of the line currents IR, Is, IT, ii)...
A Δ-connected source supplies power to a Y-connected load in a three-phase balanced system. Given that the line impedance is (1 + j1) Ω per phase while the load impedance is (6 + j4) Ω per phase, find the magnitude of the line voltage at the load. Assume the source phase voltage Vab= 208 ∠0° V rms. The magnitude of the line voltage at the load is _______ Vrms.
A 3-phase 4 wire symmetrical (balanced) Y-connected source with
line voltage 340V (take the phase of VanVan to be 0 degrees) feeds
an unbalanced three phase load formed by the impedances
ZY1=14+j(14)Ω, ZY2=7+j(11)Ω and ZY3=20+j(−14)Ω connected in a Y
(a.k.a. “star”, or a “tee”) configuration. Find the line currents,
neutral current (current in the fourth “return” wire), and active
power in each phase.
(20 points) A 3-phase 4 wire symmetrical (balanced) Yconnected source with line voltage 340V (take the phase...
1. The phase voltage at the terminals of a balanced three-phase Y-connected load has an amplitude of 120V. The load has an impedance of 39 + j28Ω per phase. It is fed from a line having an impedance of 0.8 + j1.5 Ω per phase. The Y-connected source at the sending end of the line has an internal impedance of 0.2 + j0.5 Ω per phase. Calculate: a) The three line currents b) The three-phase voltages at the load c) ...
QUESTION 6 (MULTI-PHASE SYSTEMS) A 400 v, 50 Hz, three-phase distribution system supplies a 20 kVA, three-phase induction motor load at a power factor of 0 8 lagging, and a star-connected set of impedances, each having a resistance of 10 Ω and an inductive reactance of 8 Ω Calculate the capacitance of delta-connected capacitors required to improve the overalil power factor to 0 95 lagging [14] TOTAL 1001
QUESTION 6 (MULTI-PHASE SYSTEMS) A 400 v, 50 Hz, three-phase distribution system...
connected 3-phase load consisting of three identical impedances Z=
48ے36.870 W.
3-Phase System Using MATLAB/Simulink Analysis of Y-Y connected balanced 3-phase circuit using Matlab A 2400-V rms balanced 3-phase 60-Hz supply is applied to a balanced Y-connected 3-phase load consisting of three identical impedances Z- 4836.870 W. The circuit diagram is shown in Fig. 3. Taking the phase to neutral voltage Van as reference. Calculate 1) The phase &line voltage Van, Vab 2) The phase current for any phase- line...
2.11. A 4157-V rms, three-phase supply is applied to a balanced Y-connected three-phase load consisting of three identical impedances of 48236.87°2. Taking the phase to neutral voltage Van as reference, calculate (a) The phasor currents in each line. (b) The total active and reactive power supplied to the load.
A three-phase balanced wye connected source with a line voltage of 400v supplies a balanced delta connected load with the impedance of each phase ?∆ = 60∠450Ω. The impedance of the threephase line connecting the source and the load is ?l = 2∠300Ω/phase. Calculate the line current and phase current magnitudes of the load. Also find real and reactive power at the terminals (abc) of the load and at the terminals (ABC) of the source.
A balanced positive-sequence wye-connected 60-Hz three-phase source has line-to-line voltages of VL = 440 V rms. This source is connected to a balanced wye-connected load. Each phase of the load consists of a 0.5-H inductance in series with a 50-Ω resistance. Assume that the phase of Van is zero. home / study / engineering / electrical engineering / electrical engineering questions and answers / A Balanced Positive-sequence Wye-connected 60-Hz Three-phase Source Has Line-to-line Voltages ... Question: A balanced positive-sequence wye-connected...
Please show how this transformers problem is done. Thanks!
Problem 3ph [10 pts]: Y-connected source: A Y-connected balanced three-phase source is feeding a balanced three-phase load (it doesn't matter whether the load is Y or Delta connected). The voltage and current of the source are: van (t) - 340 sin (377t + 0.5236) ia(t) 100sin (377t 0.87266) Calculate the following: (a) The rms phase voltage (Van, magnitude and phase). (b) The rms line-to-line voltage (Vab, magnitude and phase) (c) The...