A 10 m3 tank is initially full. Water is added at a rate of 1 L/min...
A 10 m3 tank is initially full. Water is added at a rate of 1
L/min (QIN) and is pumped from the tank at a rate of 2.6 L/min
(QOUT).
a) Write the material balance equation for this situation
b) Solve the material balance equation to get an equation for volume as a function of time, V(t).
c) Determine how long it will take until the tank is half full.
Homework Answers
Add Answer to:
A 10 m3 tank is initially full. Water is added at a rate of 1
L/min...
A tank initially contains 3 m3 of water at 15 ° C, which is heated by...
A tank initially contains 3 m3 of water at 15 ° C, which is heated by a coil that supplies 1,250 kcal / min. Water is fed to the tank at a rate of 300 L / min at 65 ° C and is discharged at 400 L / min. It considers a density of 1.0 kg / L for water and a Ĉp of 1.0 kcal / kg K. The agitator in the tank has a 5 HP motor....
(1) A tank is filled with 300 liters (L) of contaminated water initially containing 3 kg...
(1) A tank is filled with 300 liters (L) of contaminated water initially containing 3 kg of toxin. Pure water is pumped in to the tank at a rate of 40 L/min, mixes instantaneously, and the mixture is pumped out at the same rate (40 L/min). Let y(t) be the amount of toxin present in the tank at time t. Write the differential equation and the initial value that models this scenario. (a) Find the particular solution, y(t). Put a...
Water is added at varying rates to a 400.0 -liter holding tank. When a valve in...
Water is added at varying rates to a 400.0 -liter holding tank. When a valve in a discharge line is opened, water flows out at a rate proportional to the height and hence to the volume V of water in the tank. The flow of water into the tank is slowly increased and the level rises in consequence, until at a steady input rate of 50.0 L/min the level just reaches the top but does not spill over. The input...
7.) Water treated in the City of Tallahassee Water Treatment Facility is pumped to the top of the city water tower at a constant rate of 1000 L/min. The water tower has a maximum capacity of 1 ×...
7.) Water treated in the City of Tallahassee Water Treatment Facility is pumped to the top of the city water tower at a constant rate of 1000 L/min. The water tower has a maximum capacity of 1 × 107 L. At 5 am Monday morning the tank is filled to 90% of maximum capacity. As the city residents wake up and start their day the rate of withdrawal from the water tower increases: the rate of water consumption at 5...
Salt water flows at a constant rate of 6 L/min into a tank that initially held...
Salt water flows at a constant rate of 6 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.3 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
Salt water flows at a constant rate of 6 L/min into a tank that initially held...
Salt water flows at a constant rate of 6 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.15 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
Salt water flows at a constant rate of 9 L/min into a tank that initially held...
Salt water flows at a constant rate of 9 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.15 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
4. Suppose there are two tanks, each containing 200 l of fluid. Tank 1 initially contains...
4. Suppose there are two tanks, each containing 200 l of fluid. Tank 1 initially contains pure water and tank 2 initially contains water with 200 kg of salt dissolved. The tanks are stirred constantly so their solutions have uniform concentration. There is a pipe which takes 10 l/min from tank 1 to tank 2, and another pipe which takes 5 l/min from tank 2 to tank 1. Also, pure water is being pumped into tank 1 at a rate...
6. A 500 L tank initially contains 10 g of salt dissolved in 200 L of...
6. A 500 L tank initially contains 10 g of salt dissolved in 200 L of water. Water containing 1/4 g of salt per liter is poured into the tank at the rate of 4 L/min and the mixture is drained from the tank at the rate of 2 L/min. Find an initial value problem that solve for x(t), the mass of salt in the tank at time t prior to when the tank overflows, then solve for x(t).
A cylindrical tank is being filled with water. The tank is initially empty but then water...
A cylindrical tank is being filled with water. The tank is initially empty but then water begins to flow into it at a rate of 62.00 kg/min. There is a small hole of radius r = 0.7000 cm at the bottom of the tank where water can escape. Because the flow rate of water leaving the hole is initially at a slower rate than water entering the tank, the water level rises. The average velocity of water leaving through the...
7.) Water treated in the City of Tallahassee Water Treatment Facility is pumped to the top of the city water tower at a constant rate of 1000 L/min. The water tower has a maximum capacity of 1 × 107 L. At 5 am Monday morning the tank is filled to 90% of maximum capacity. As the city residents wake up and start their day the rate of withdrawal from the water tower increases: the rate of water consumption at 5...
Salt water flows at a constant rate of 6 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.3 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
Salt water flows at a constant rate of 6 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.15 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
Salt water flows at a constant rate of 9 L/min into a tank that initially held 100 L of salt solution in which was dissolved 0.15 kg of salt. The solution inside the tank is kept well stirred and flows out of the tank at the same rate. If the concentration of salt in the solution entering the tank is 0.03 kg/L. a) Dtermine the mass of salt in the tank after t min. b) When will the concentration of...
6. A 500 L tank initially contains 10 g of salt dissolved in 200 L of water. Water containing 1/4 g of salt per liter is poured into the tank at the rate of 4 L/min and the mixture is drained from the tank at the rate of 2 L/min. Find an initial value problem that solve for x(t), the mass of salt in the tank at time t prior to when the tank overflows, then solve for x(t).
A cylindrical tank is being filled with water. The tank is initially empty but then water begins to flow into it at a rate of 62.00 kg/min. There is a small hole of radius r = 0.7000 cm at the bottom of the tank where water can escape. Because the flow rate of water leaving the hole is initially at a slower rate than water entering the tank, the water level rises. The average velocity of water leaving through the...
Most questions answered within 3 hours.
-
Where is the error in this code sequence?
String s1 = "Hello";
String s2 = "ello";...
asked 10 months ago -
Financial data for Joel de Paris, Inc., for last year
follow:
Joel de Paris, Inc.
Balance...
asked 10 months ago -
Consider this reaction:
Al2(SO4)3 (aq)+ BaCl3
(aq) Al2Cl6 (aq)- +
3BaSO4(s) . What is the...
asked 10 months ago -
Suppose that Savneet is considering increasing her
recent random sample from 20 car rentals to 40...
asked 10 months ago -
Trucks arrive at an unloading terminal at an average rate of 120
per hour.
Trucks arrive...
asked 10 months ago -
Why are methanol and ethanol completely soluble in water while
octanol is not very little soluble....
asked 10 months ago -
A facilities manager at a university reads in a research report
that the mean amount of...
asked 10 months ago -
When the CuSO4 is rehydrated by adding water to the anhydrous
compound, is this an endothermic...
asked 10 months ago -
A ray of sunlight is passing from diamond into crown glass; the
angle of incidence is...
asked 10 months ago -
A block of mass 0.249 kg is placed on top of a light, vertical
spring of...
asked 10 months ago -
how do the kidneys compensate in the presences of acidosis
a) trigger hyperventilate
b) reserve acid...
asked 10 months ago -
Question 501 pts
The rental rate of capital to the firm increases. Which of the
following...
asked 10 months ago