The measured wind speed at 10 m height is 8.0 m/s. Assuming that the wind shear...

Question

Question

engineering Mechanical-Engineering

Answer 1

Answer #1

Answert Griven data wind speed V = 8 m/s at height, hi = 10m For shear exponent Iwind at grass terrain Roughness length, 1 =

Answer 2

Similar Homework Help Questions

The measured wind speed at 10 m height is 8.0 m/s. Assuming that the wind shear...

The measured wind speed at 10 m height is 8.0 m/s. Assuming that the wind shear exponent is the one of low grass terrain, estimate the wind speed at height 50 m
The measured wind speed at 10 m height is 8.0 m/s. Assuming that the roughness length...

The measured wind speed at 10 m height is 8.0 m/s. Assuming that the roughness length is the one attribute to open agricultural length, estimate the wind speed at height 50 m
Please assume the wind speed at a height of h = 10 misu = 9 Using...

Please assume the wind speed at a height of h = 10 misu = 9 Using the wind speed-altitude power law with an exponent of n = 0.2 please calculate the height at which a wind speed of 10 m/s is available.

The average wind speed is 6 m/s at a 10-m-high anemometer. Estimate the average power density...

The average wind speed is 6 m/s at a 10-m-high anemometer. Estimate the average power density in the wind at a height of 80 m. Assume Rayleigh statistics, a standard friction coefficient α = 1/7, and standard air density ρ = 1.225 kg/m3.
A wind turbine with a blade diameter of 50 m, tower height of 60 m and...

A wind turbine with a blade diameter of 50 m, tower height of 60 m and wind speed of 10 m/s at ground level and the air density is 1.23 kg/m3 is operating. Calculate the actual power that can be harnessed from this wind turbine.
If the incoming wind speed is at 10 m/s, if the axial induction factor is at...

If the incoming wind speed is at 10 m/s, if the axial induction factor is at optimal value please calculate the wind speed right in front of the wind turbine (U2) and wind speed right after the wind turbine (U3) and wind speed in the far wake (U4).

A 5 MW offshore wind turbine has a hub height of 90 m. For the location...

A 5 MW offshore wind turbine has a hub height of 90 m. For the location where this turbine is placed, buoy data shows that the mean wind speed at 10 m is 7.0 m/s. For the questions below, use the log law, with z0= 0.2 mm. a) What is the mean wind speed at hub height? b) If this turbine were placed on land, what would be the wind speed at 10 m which would result in the same mean wind...
A wind-turbine has a propeller radius of 30 m, rated speed of 10 m/s and 30% efficiency at the rated speed.

A wind-turbine has a propeller radius of 30 m, rated speed of 10 m/s and 30% efficiency at the rated speed. a) Calculate the rated power for this wind turbine. (air density is 1.2 kg/m). b) If this turbine produces 2 GW-h energy in one year, what is its capacity factor?
It is a clear night with a surface wind speed of 2 m/s. There is 100...

It is a clear night with a surface wind speed of 2 m/s. There is 100 g/s of a nonreactive pollutant that is released from a stack in a rural area. The physical stack height is 50 meters and there is a heat emission rate of .005 MW. A) Find the plume rise. (delta h) B) Find the ground level concentration 700m directly downwind at ground level.

2. A wind turbine has the maximum power output at the rated speed of 12 m/s...

2. A wind turbine has the maximum power output at the rated speed of 12 m/s and a rotor diameter of 82 meters. The cut-in and cut-out speeds for this type of wind turbine are 4 m/s and 23 m/s, respectively. The table below shows the annual wind data near a potential site for setting up a wind farm using this type of wind turbine and the power coefficient of the wind turbine at the specific wind speed. The air...