Use the following visual to solve for the total resistance: * 1 ohm 3.45 ohms 5.2...

Question

Question

Use the following visual to solve for the total resistance: *

1 ohm

3.45 ohms

5.2 ohms

10 ohms

science physics

Answer 1

Answer #1

loohms Given lohm 3.45 ohm S. 2 ohms if all resistance in series then total resistance is Rtotal Riot R₂ + Ryt Ry Rtotal = 1

Answer 2

Similar Homework Help Questions

A λ/2 dipole, with a total loss resistance of 1 ohm, is connected to a generator...

A λ/2 dipole, with a total loss resistance of 1 ohm, is connected to a generator whose internal impedance is 25 + j25 ohms via a 50-ohm λ/2-long lossless transmission line. Assuming that the peak voltage of the generator is 2 V and the impedance of the dipole, excluding the loss resistance, is 73 + j42.5 ohms, find the power a) supplied by the source (real) b) radiated by the antenna c) dissipated by the antenna
Draw a circuit with a resistance(R=V/I) of 1500 ohms, but you only have access to 1...

Draw a circuit with a resistance(R=V/I) of 1500 ohms, but you only have access to 1 resistor of 1000 ohm. Hint: use exactly 3 resistors. Use wires, switches, battery, voltmeter, and ammeter, regular resistors of 10 ohms. You can change your resistor value. Do this by using equivalent resistance equations for both series and parallel.
A 12 ohm, a 15 ohm, and an unknown resistance are connected in parallel. The total...

A 12 ohm, a 15 ohm, and an unknown resistance are connected in parallel. The total current of the combination is 12 A. The current across the 15 ohm branch is 4 A. What is the total voltage? What is the total resistance? What is the unknown resistance?

For the following circuit, assume that R1 = 1 ohm, R2 = 2 ohms, R3 =...

For the following circuit, assume that R1 = 1 ohm, R2 = 2 ohms, R3 = 8 ohms, and R4 = 4 ohms. Also assume that V1 = 50 volts and V2 = 100 volts. Find the current through each of the resistors and the power dissipated through all of the resistors. (Hint: You’ll need to use Kirchoff’s Loop and Junction Rule) Vi R2 R3 R4 NV
A platinum resistance thermometer has a re- sistance of 200 ohms. A platinum resistance thermometer has...

A platinum resistance thermometer has a re- sistance of 200 ohms. A platinum resistance thermometer has a resistance of 200 ohm when placed in an ice 0 degree C bath and 290.8 Ohm when immersed in a crucible containing a melting substance. What is the melting point of the substance? The temperature coefficient of the platinum is 0.00392 (degreeC)^-1 . The resistor was calibrated at a temperature of 20 degree C. Answer in units of degree C. A platinum resistance...
a). What is the resistance of ten 10 ohm resistors hooked up in parallel? [Write answer...

a). What is the resistance of ten 10 ohm resistors hooked up in parallel? [Write answer to 3 sig. figs.] b). What is the resistance of ten 10 ohm resistors hooked up in parallel? [Write answer to 3 sig. figs.] c). How many 10 ohm resistors hooked up in parallel would you need to yield an equivalent resistance of 0.20 ohms. [Write answer to 2 sig. figs.]

A copper wire has a resistance of 9.00 ohms at 33.0 degrees. Determine the resistance (in...

A copper wire has a resistance of 9.00 ohms at 33.0 degrees. Determine the resistance (in ohm) at 433 degrees celsius. The temperature coefficient of resistivity for copper wire is 3.90*10^-3 degrees celsius to the negative one power. (Assume that the temperarure coefficient of resistivity was measured using the reference temperature 20 degrees celsius.)
L13) A circuit has an emf of 12 V and internal resistance of 0.1 ohm. The...

L13) A circuit has an emf of 12 V and internal resistance of 0.1 ohm. The seat of emf is placed across a resistor array that has two sets of three 5 ohm resistors in parallel. These two sets are in series with each other, and with an additional 2 ohm resistor. a) What is the current thru the 2 ohm resistor? b) After 2 years of use, the internal resistance grows to 0.5 ohms. What is the current thru...
A 12V battery with an internal resistance of 10 Ohms is hooked up to a 100...

A 12V battery with an internal resistance of 10 Ohms is hooked up to a 100 Ohm resistor. The power dissipated in the battery is a. 14.4W b. 1.44W c. 0.144W d. 0.12W

PI : For circuit below v-20 V and R,-8 Ohm and R2-2 Ohm. Calculate voltage and...

PI : For circuit below v-20 V and R,-8 Ohm and R2-2 Ohm. Calculate voltage and power loss in each resistor in the circuit. (Use voltage division and P = (voltage*voltage) resistance)- You cannot use KVL, KCL or Ohms law) Ri R2 P2: For circuit below i = 50 A and R1 = 15 Ohm and R2 = 10 Ohm. Calculate current and power loss in each resistor in the circuit. (Use current division and P - (current*current) resistance) You...